CBR600rr Wrecked Bike Rebuild (PT 3 Assembly / First ride)
Вставка
- Опубліковано 8 лют 2025
- I finally got the stolen and wrecked cbr600rr assembled enough to ride it! It’s taken a while but I’m so close to being done!
Fairings are from monsterfairing...
Instagram- / benjamminoutdoors
Facebook - www.facebook.c...
Patreon- www.patreon.co...
Song is Hip-Hop Beat Rock Gods Haute Beets Rap Instrumental Royalty Free
• Hip-Hop Beat | Rock Go...
It's good to see someone really working on a bike well done
You are one Garage Rambo! Bravo!
Thanks for the effort to get the bike done and shared it with us 😀!
I can't imagine but saw done.
I'm speechless 😂
One of the coolest videos I have watched. So cool to see a bike built. Pretty cool how you just know where everything goes
Un
All jobs done, alone and without imprecations... :-) you're the best!!
..
@@saloumartimisaloumartimi3943 ⁸
Little bearing tip: Put the bearings (box, wrapers and all) into a ziplock bag, and then into the freezer for 24 hours. Literally seconds before installation, pull them out of the freezer, put a small bit of lube/grease on the bearing exterior surface - they will go in a tad bit more easily (light hammer use)
I did put these in the freezer for a day before this.
When I did my CB750. I put the motor on a piece of 3/4 ply , jacked the motor up with the jack. And then placed the frame on it. A lot easier than having to pivot the motor around when you are trying to fit in bolts.
You give me hope lol
Putting an engine in alone is very difficult, much respect.
Lol yeah it was challenging!
I am impressed, doing all this alone mad respect man!
Sir i dont like long video. But i dont know why i enjoy this video every single minute. This is better than those timelapse video. Do more vid like this please!
I swear you’re a professional now. Awesome job bro!
Thanks bro!
sorry for my English but I only speak Spanish, I don't understand much what you say but you amuse me and I learn a lot with your videos! keep it up greetings from uruguay!
Hola! Thanks bro I really appreciate it!
Hi, I'm from Philippines and i love your work. ❤️
അയിന്
Thanks!!
Dit Memai
Hi man im from Aruba glad to see some real fix on bikes i have a Yamaha R1 98 gonna need some lesson how to fix bikes its my first one
My cbr1000rr sits most of the time unused and it usually leaks its fork, what you did there was exactly what I did every time but with plastic playing cards.
It’s a great trick!
Best series that I have seen on UA-cam Ever! Thank you!
20:48 When you crank it up for the second time, it sounds like your cam chain is rattling for a second or two, before the cam chain tensioner eventually takes take up the slack and it goes quiet. It could be just the recording, but I'd have a look at the tensioner, it might be on the way out 🤔🤷♂️.
Amazing work. Hugely impressed.
Awesome video and an awesome job buddy looks good, could do with a bike lift but I know how much they cost and someone to help when you need a third hand, I'm glued to your bike videos now ,Bring it on
Not trying to be a nancy here but a couple of pointers. They do make a special tool for pressing in the headset bearings. Doing it crooked like that you run a risk of damaging the frame. Also, you want to coat the output shaft splines with a 60%+ moly grease to prevent wear to the splines from the front sprocket, its very important. Standard moly grease is only 3%, you will have to special order it and its expensive. California Scientific has a good writeup about this on their site if you wanted to know more.
I like your videos, keep it up 👍
Thanks for the info!
Thats so hard when no help 😞, awesome video props to getting the job done on your own 💯💯👍👍
you doin great dude, that's so impressive
Thanks!
Its like you aligned that engine in the frame first try!!
O hi bro ❤️🤗
I notice maybe this is not the most professional way to build a bike,but you have try and i love it and enjoy this proses.
Nice and good job man..
No it not, but Im better than I was. The more I do builds the more I learn
@@Benjamminoutdoors keep it,more interesting because of the proses
Cool bro! Waiting the next video for the complete one!
Waw Outstanding Modified 😱😍
U deserve million subscribers
Thanks bro I’m really trying to get there!
Pretty amazing dude..very good job on that..
So satisfying to watch your videos ❤️🏍️
Great attention to detail and showing how to work through some problems. Hope to do this same build myself soon.
Good and clean work bro 👏👏
Muchas gracias por el video excelente trabajo
whens the next part 😭 I want to see how you install the fairings I dropped my bike a couple months ago but never changed the fairings afraid to do it and not be able to assemble
Lol dang sorry bro when I drop the bike a few weeks back I damage the headlights so I’m waiting for those right now, I’ll try to get the video out ASAP!
We are waiting 4th prt
REED 🇹🇷😂👌
I'm a machanic my self bro n good job n beautyfully done, god bless u,,.
Good job brother
Good job man! Lookin good. :-D
Thanks!
Good job Chef
Well done 👍 bro i like it your work great job
Well Done Dude.Nice Job🤘🤘🤘🤘🤘🤘🤘
Wish I could do what you do. Your the man
You can just have to start out with stuff that’s very small and work your way up, I didn’t get here by starting here, I started on one of the most simple bikes there is which was a 2 stroke dirtbike!
Throw back watching
Sweet man shaping up nicely
If we are a guy like you in Jamaica it will be so wonderful and blessed
Become that guy!
Ganda nman nyan boss quality boss
Heck yeah man!
amazing. nice job
Thanks!
good job boy.i like you content
If I remember right there is a plug in from the wiring harness that goes a shit ton easier if you plug it in before you mount the motor up. I wanna say its the cam sensor. Did you run into that? I was waiting for this moment but it never came.
No i didn’t have that problem it all went pretty smoothly for me, the hardest part for me was getting the airbox to sit right and with the vent hoses on correctly.
Exellent Rebuilt CBR 600 RR
Love this channel
Thanks!!
Your a Beast man I wish you lived in California
Good job man. This is insane work 👍🏻👍🏻
Good job brw
Very impressed with your work.
This is awesome, can’t wait to see the final stage and look. How can I contact you ? Maybe via email or private chat etc.
My email is benjamminoutdoors@gmail.com
Never seen the seal saver trick before what do you use to push up in there ?
Yeah it’s really great it basically goes in there and just pulls all the crap around the seal out and then you basically just reseat them, sometimes you have to do it a few times.
@@Benjamminoutdoors Awesome thanks
really good skills, also love your tools
Very good video
Thanks!
Nice bike bro.. From Philippines
Profesional 🤙
Super work 👍👍👌
Hello.Xe cộ độ khủng khiếp thật ....👍
Good work
If big lego of motorcycle is exist, you just watched this man finished that one big lego alone... 😎
Excelente trabajo saludos desde Argentina
Wow.. you have my respect...👍🏻
Amaging bro
Hi I'm from Indonesia and I'd like to see your excellent work👍👍🙏👌
Thanks!
Just watching this made me realise I should not attempt to fix the blown head gasket on my CBR 600 F3.
Netflix: are you still watching?
*you with someone’s daughter*
20:02
I wish i have a bike like that
Hello, my 07 cbr600rr isn’t starting.. I get an FI code #19 (ignition pulse sensor) .. any suggestions as to what exactly I need to replace? Not exactly too sure where the ignition pulse sensor is 🤷♂️. Any help would be much appreciated. Thank you
That’s the sensor that’s inside the clutch cover that plugs in under the throttle body.
@@Benjamminoutdoors Thank you! You recommend anything to fix the issue? Should I just purchase a new one? Or could it be an issue with the wiring?
@@divad600rrv5 I’d definitely look at it first make sure there’s no damage on the crank, or the sensor but yeah I’d probably replace.
@@Benjamminoutdoors ok I’ll do that once I get home. Thank you so much! & you said they connect under the throttle body.. I’m thinking maybe I have it plugged in the wrong spot? In your video at 8:59 when you’re explaining the plugs for the throttle body you can see a skinny grey & black plug on top of the radiator hose. I have it connected into that black one.. is that the right spot?
@@divad600rrv5 yeah they should be color-coded the plugs should be the same colors, my email is in my bio if you want to email me.
Those seal-savers seem a bit of a copout, no offense. What's the crack and how long do they last?
I need a full fiber for my Honda 2005 600rr
Good job bro.great video..
God bless you my friend
Thanks!
@@Benjamminoutdoors you welcome
awesome work!
Shout out sir from Phil.
Do you have any recommended brand of parts to share for us?
I try to stick with OEM if I can, but most of the non-structural parts, like upper fairing stays and headlights and stuff I typically buy off eBay.
You spent all that money at the powder coated and put dirty,rusty,clip ones back on the bike?
Good work man 👍
Where can you find forks for the same bike 07
Look on Facebook marketplace for a local guy that’s parting it out, if not check on eBay.
Good job man
Man that thing is awesome...also did I see that right? Tach goes to 15k? Lol no way
Thanks! And Believe it or not the r6 revs to like 16.5k
@@Benjamminoutdoors that's impressive! I wanna try something like that!
How much frame and velg
Extremely great mind there
Can u do same with panigale 1199
I would love too but I don’t have one, my buddy built from the bottom just got one so go check out his channel!
I need help i uave a 2001 cbr f4i and im not getting spark. Any help??
Its that a original yoshimura exshaust?
Please try to install a cbr 600 rr engine to cbr 150 r chassis
We actually don’t have cbr150r in the USA
The quality and production has really gone up on your new videos. I also like that you talk more compared to your first rebuilds
Thanks, that means a lot!!! I’m trying to be the best!
Buen video saludes desde Colombia 🇨🇴👍👍👍
Would you happen to have a diagram on how to start the motor out of the bike? I have a 2008 cbr600rr motor that I got out of a frame, wire harness and all. Full on drop out, im trying to get it started.
Nice 👍
My Dream bike
Yeah it’s a great bike!
@@Benjamminoutdoors someday i gonna buy one🥺😍 more power i'm your fan from philippines 😁
what version 600rr please?
Good video bro 🙏🏽🙏🏽
Is that thing still street legal with the cat removed?
Technically speaking prob not, but a lot of states don’t have vehicle inspections.
Is that spray on glue you used to put on the grips?
It’s actually hairspray, it works pretty good.
@@Benjamminoutdoors
Ok! I'll give it a go
@@modoudrammeh WD40 works good in a pinch just give it a few hours in the sun to evaporate.
@@robm2907 wd 40 on grips?
That sounds like a terrible idea
It's a solvent degreaser with freeing properties...that's bad for grips you want something that sticks
Hi friend, I am from India, chennai I need second hand honda CBR 600r or rebuild how much cost take?
I need to buy some of your product