Everything Wrong With Mercedes' M275 Biturbo V12. Are They Worth It?
Вставка
- Опубліковано 16 сер 2023
- Check out Clark at www.V12ICPack.com !
Check us out on Facebook and Instagram @dcmotorwerks
www.dcmotorwerks.com
goo.gl/maps/L73nR4dQErpBtPj3A
Alpharetta's Enthusiast Mercedes-Benz and Exotic Auto Shop - Авто та транспорт
Your knowledge of these complicated vehicles is so impressive! Your passion really shows!
Thank you. The V12’s I have a big soft spot for
@@DCMotorWerkswho wouldn’t!
I just discovered your UA-cam Channel. You’re making some very informative videos. Thanks for sharing your knowledge and experience with us. Keep up the good work. I’m now a subscriber😊
Thank you so much!
Good video. I've seen that oil distribution o ring fail on both of the 65 engines I've worked on in the past few months. Luckily, there's a secondary gasket that goes around the perimeter of the cover that will keep the oil sealed in for the most part. there is a small chamber that fills up with oil and can push/leak out of the secondary gasket if the leak is bad enough on that primary O ring. Also you'll lose oil pressure to the turbos. Pretty surprised we haven't seen oil and coolant mix since the other chamber in the valley is filled with coolant and separated by a thin strip of rubber. I'd guess we'll start seeing some failures in the next few years- especially from the early M275s.
Haven’t seen It yet. Such solid engines. Hopefully stay that way!
I have a 2007 s65, just did engine and tranny mounts but I couldn’t tell anything was wrong other than the fact a vacuum hose kept coming off and tripping a check engine light, and my entire front end other than struts was shot, car rode so good and was so quiet I couldn’t tell until it went on the lift, ride quality is insane now
Happens gradually so a lot of people don’t notice!
If I ever own a v12 M275... guess who gets the luxury of fixing it! Congrats!
We’d be glad to!
Fantastic work guys. I'm amazed that you don't have more subscribers. Hi from the UK.
Thanks! Us too 😅. All in good time hopefully!
Best video thanks so much for the information
Our pleasure!
Love how informative your content is. Is this the engine with the O ring that needs the heads removed to replace it? Ever worth that as a while your engine is out? Guessing not but had to ask.
I did make mention of that one in the video. This is that engine however it is so uncommon we do not worry about tearing the engine down to replace it unless it has actually failed.
Carl Rupp's Boost Box and coil packs go a long way toward maximizing consistent performance and efficiency.
He’s a great fella!
I am going to do some research on this "Carl Rupp" that you speak of.... Being that "he's a great fella"...... Thank you!!
I actually see a "Clark Rupp" addressing this topic.
I always thought the "AMG" V12 had the M279 engine & the regular SL, CL & S class V12 had the M275 engine.
Definitely appreciate your knowledge...
& I'm definitely gonna look into the W.C. reference you've made.... I've gotta replace one of my coil packs at the moment, and I've replaced my voltage transformer. THANKS AGAIN THOU!!
M279 is the revision of the M275 launched in the R231 SL and all V12 models post MY2014. Up until then they are all the M275 unless its the Maybach (original maybach) have the M285. Pagani uses the M158 Version. All iterations of the same engine though
@@DCMotorWerks
Thank you!!!....I Wish I were closer to your area to do business with you because I appreciate that you seem to have knowledge of the V12.
A lot of auto "specialists" appear to be afraid one way or another....
I deal with a strictly Mercedes shop & even they are afraid of the V12 as well as the ABC system so I'm forced to deal with the dealership in some cases. I would luv to be involved with someone that's truly knowledgeable in this category..... Anyway THANKS, & good day to you!!!
thank you, im looking at an 09 SL now. needs coils i think, low miles. just looking for a nice weekend summer cruiser. Any preventative maintenance i should do while its on the lift this wnter?
Flush the ABC fluid. Give everything a good lookover. Check date codes on the coils.
SHREWD DC MotorWerks
Tutorial brilliant, thank you very much for the helpful information video .
Can't believe that 6 hours to replace spark plugs on a mercedes benz vehicles
👍
ASTUTE DC MotorWerks
From Nick Ayivor from London England UK 🇬🇧 ⏰️ 21:54pm
CAR WIZARD WAS RIGHT ABOUT
DC MotorWerks
SUBSTANTIAL DC MotorWerks
KNOWLEDGEABLE DC MotorWerks
ACCOMPLISHED DC MotorWerks
SHARP DC MotorWerks
INTELLECTUAL DC MotorWerks
PRODIGY DC MotorWerks
PROFICIENT DC MotorWerks
SHREWD DC MotorWerks
ASTUTE DC MotorWerks
Once again, thank you, CAR WIZARD
QUICK-WITTED DC MotorWerks
👍
From Nick Ayivor from London England UK 🇬🇧 ⏰️ 22:03pm
24 is a lot of plugs to spin out!
For the O-Ring, is the replacement better, more resilient, and improved than the OEM to end that problem once and for all?
I don’t have an answer for that unfortunately. Will be another 15 years to tell. Uncommon anyhow. Think it’s more based on oil quality and oil change intervals
@@DCMotorWerks Indeed, point taken. Thanks. Do you accept shipments of the engine to repair? Say if I end up owning a M275 that needs a full restoration? Thanks.
badass engine requires badass maintenance.
Exotic cars come with exotic prices!
About how much does an engine out service cost for this? Thinking about getting it done for my S65 soon. W221 chassis.
The engine out w/ new mounts is about $5k. Then you get into all the while you're in there stuff. Adds a few thousand usually.
Hi how much cost all the parts whitout labor ? The mounts the gaskets seals and vacuum lines?
Really depends on how far you want to take it
Any common problems on the m120? Have you done any videos on those? I read somewhere that oil leaks were a common issue.
Good idea. Next time we have one in we will do a video on their common faults. A few oil leaks, the upper timing covers are a bit of a chore
@@DCMotorWerks great. I’m excited to see when you get one and break it down
Curious to know the mileage on the engine please.
55,000
Nice video! But this is insanity. This is unaffordable for the average person. I can only imagine the total bill for parts and labour with a Mercedes dealer. I bet you can buy a brandnew (budget) car for that kind of money.
Thanks for the effort and length of this video, I wish you're able to make more of these videos if time allows you to do so.....
Thank you. Yes they can definitely wreck a budget. However, they really are a lot of car for the money as much as they have depreciated but unfortunately the service costs don’t depreciate.
Yep i would rather a corvette anyday! I'm sure they designed it to be a pita to service on purpose. Im sure it drives amazing though. I have an S55 myself, and researched the v12 cars years ago. Way more expensive and harder to work on, i would choose sl55 over v12 anyday.
Nothing about an SL65 is for an average person. These were Mercedes most powerful engines. For those insisting on V12's, Mercedes has the most experience as the highest volume V12 manufacturer.
Anyone ever try and remove the engine from the top?
Not that I’m aware of. It’s not hard to get it out the bottom
you can do it on the CL/S65 models, not sure about the SL. never worked on one of those. you've got to put the hood in service position, take off intercoolers and as much of the accessories as you can but it's possible. I've also removed the engine from the front before. dropping it from the bottom is 100% the best way.
I’ve got the 4 post lift so getting it high enough from the ground is the challenge
Crankshaft Position Sensor
They pop up sometimes. much more common on 112/113 engines.
@@DCMotorWerks Why is that? They use the same part.
Can this engine work in w210 chassis
I’ve heard of it being done
Yes Brabus have the e65 w210 whit v12 dont know or its this M275 engine it should be after built because this engine is in production since 2003