Best WiFi 6E Mesh System - TP Link Deco XE75 Pro
Вставка
- Опубліковано 25 лис 2023
- Reviewing TP-Links WiFi 6E Mesh system. Very impressive speeds and range.
Purchase using the following link(s):
3-pack - amzn.to/3GhVoQk
2-pack - amzn.to/47RmidO
1-pack - amzn.to/3Gh6Ewl
#tplink #wifi6e #mesh #wireless #meshwifi #networking #unboxingvideo #unboxing #review #technology
◽️◽️◽️◽️◽️◽️
ADD ME ON...
INSTAGRAM: @clohofficial ► / clohofficial
TWITTER: @clohofficial ► / clohofficial
PATREON: / chrisloh
BLOG: clohofficial.com/
AMAZON STOREFRONT: www.amazon.com/shop/chrisloh
-----------
Video Gear I use:
📷 Sony a7iii - amzn.to/3CDzTJg
📷 Canon D80 - amzn.to/3bDkIOX
Audio Gear I use:
🎙️ Rode Wireless Go - amzn.to/3fXbX5S
🎙️ Samson G Track Pro - amzn.to/2WBF7Q6
🎙️ FiFine Wireless Microphone System - amzn.to/2zFIsoq
🎙️ FiFine K678 Microphone - www.amazon.com/dp/B085WRN1VD?
Lighting Gear I use:
Graphy StudioFX Box Lights - amzn.to/3cFfmnR
Neewer Studio Lighting - amzn.to/3bAYFs7
All Equipment and Editing Equipment that I use:
kit.co/clohoffical/my-filming
-----------
Music Track by:
Main: From UA-cam Library
-----------
⬇️ WATCH MORE VIDEOS ⬇️
/ cloh761
/ @everyday-unboxing
/ @3uildstudio - Наука та технологія
Thank you for the type of video that makes sense to those of us who are not experts. Testing the speeds at each pod was great to see. It probably made my decision which mesh system to buy.
I bought and installed it and its all thumbs up way up.
Does your modem or gateway have wireless too, turn it off may interfear
Last year i bought the no pro version and worked fine my devices detected the 6ghz ssid, but the bottleneck were the gigabit ports due that i have a switch with multigig ports, returned the no pro version and acquired the pro this time i wasn't able to detect the 6ghz, tplink support wasn't able to find the reason, tried different firmwares, no luck😐. Opted to buy a Zyxel Access Point with 6e and 2.5g its working fine!.
Enjoyed your video very much. Informative, calm and on point. Helped me in my purchase.
What phone are you using and what band are you connected to on your phone?
I recommend you guys turn off the 2.4 ghz band and just use the 5ghz. Then create an IoT network which utilizes the 2.4 ghz band on a seperate SSID. Speeds are much more accurate.
If you have equipment that only works on 2.4 - best to let the router auto switch?
@@decatoneuser if you only have 2.4 ghz equipment (which is mind blowing to me) yeah just let it auto switch. Because there is no downgrading from there.
@@ITrendzI I don't believe he's saying he "only" has 2.4 ghz equipment.... rather that "some" equipment uses 2.4 ghz only. Lots of smart lighting/outlets only use 2.4 ghz.
Thanks for this. Is there any reasons that connecting one of the Decos to a 2nd unmanaged gigabit switch wouldn’t work? (ISP->Deco1->switch1->switch2-Deco2). I’m troubleshooting and can’t get it to connect via Ethernet for wired backhaul. TIA.
Is your internet provider only delivering 40-50 Mbit upload?
My deco can reach 800-900 Mbit 🤷🏽♂️
I see that according to your test you have Spectrum. Are you using the Spectrum provided Modem with the Deco Unit? ALso which plan do you have, 500 or 1000MBPS from Spectrum? I live in TX and my Spectrum 500mbps maybe reaches 250 on a good day. Im looking to upgrade to the 1000mbps plus the Deco Pro units to be able to reach all my home. Do you have speed tests prior to the Deco to see how much better it got?
My situation too… I need to go see what I’m paying for right now. Do this first.
@decatoneuser I changed the Specteum modem to the Deco XE75 pro and my speeds significantly improved.. I now clock in consistently above 500mbps.. I don't see a need now to upgrade to 1000mbps as everything in my home is now working super good.
Went from like 160-200mbps to over 500 by just adding this.
@@decatoneuser I noticed you commented on my comment. You mentioned you use 2.4 ghz devices. Do not expect to get the speeds you pay for on wifi let alone 2.4ghz. 5ghz and the new 6ghz devices will get you closer to what you pay for.
What about coverage? Does it improve coverage? Or depends of which devices I have? I have devices with older wi fi. Will coverage from.this mesh is going to be better? Or these devices must have wi fi 6 aswell? I amo not taling about speeda, but about coverage.
Hi
Network provider installed normal fiber optic connection it’s only 524 MBPS working .My question is after install this mesh can get more speed u mean ?
Stupid question... ive gone from normal broadband... 65mb to 900mb up and down, connect to the main router modem i get near full speed. I have deco m5's one ethernet into the router and then a 2nd one on the floor upstairs... yet i get 100gb ish...if im lucky... looking at the software for the deco a speedtest is hitting 900 at the main deco, is it just the type of deco i have that is throttling the speed upstairs?
Got the same here.. dont no why the main is slower
Does anybody know which band would the routers use to communicate with each other? If they are close enough would they use 6GHz to communicate with each other?
That makes zero sense the one plugged in the modem should be faster 😂
What do you about the axe5300 wifi 6e tri band at Costco thts on sale for 269.99
I believe it's the same thing just a different model# for coscto
Whoa… I didn’t know Cco sold TP-Link products, I’ll check this out.
@@VulgrDisplay The Costco unit is the Non-Pro: (XE75). Only difference is the lack of a 2.5gbe ethernet port.
How many deco units can I join to my wifi net after initial 3 included in the box? Can I use unlimited units at same network? There is a limit?
I think I read somewhere like 10 or so?
Why is the upload speed so slow?
More than likely his provider, In my area we can get 1000 down put on 42 up
Gotta get fiber…I pay my own 500mb/s and get 650down 625 up consistently…previous cable plan 300mb/s got 200 down 15 up
Nice video, what you could do is take a look at the network map in the app before you test to ensure your phone is actual bound to the node you're stood next to. With my S7 1900 mesh I can be stood right next to another node and it will hand on to the previous one for 5 minutes+ sometimes. Have fast connection swapping too. Interesting vid though.
Purchase using the following link(s):
3-pack - amzn.to/3GhVoQk
2-pack - amzn.to/47RmidO
1-pack - amzn.to/3Gh6Ewl
I have devices such as televisions that are disconnecting. When i visit the app it says the devices signal is strong. Has this happened to anyone?
Yes.. same situation with me too. I’m using 3 - Deco X55’s.
@@decatoneuser i guess we wait for a reply from someone who has solved this issue
Same. From what I've seen it's very common but I don't have that issue if I run them on the main network. It's only when I do iot networks
My Home internet plan is only 100 mbps. I got linsys velop 6e, now when i test the internet speed it is 800 MBps.. i am not sure how this is possible...can any one please explain
It's numerically correct, you just need to convert the Byte to Bit. 100 Megabyte = 800 Megabit. Hope this help.
Dude takes the time to make the video and doesn't respond to any of the questions/feedback? Good luck hitting that 1000 subs ¯\_(ツ)_/¯
It is ok… it has recently slowed. Firmware maybe? Not real happy with it. The router is terrible. Bought a peplink One to perform routing, dhcp, etc.
It's broadcadt triangulation
You took the time to make this video. You could at least answer some of the questions being asked here by some of the folks. It’s not let there are hundreds of responses here,smh.
No USB at each point..... Disappointing considering the price.
i never trust tplink , less updates ,asus is better.
Humm…. What TP-Link system did you get rid of? What Asus system won your approval?