Intake Manifold Gasket Renewal - Nissan Micra K12
Вставка
- Опубліковано 20 чер 2023
- Replacing the intake (inlet) manifold gasket on a 2003 to 2010 Nissan Micra K12. If the gasket is failing it will create a vacuum leak at the manifold. This could cause a check engine light due to the fuel injection system being too lean or an incorrect MAP sensor reading, possibly code P0171 or P0174. You might notice a hissing sound when the engine is running, the engine may be hard to start or it may have a rough idle. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Manifold Gasket ~ amzn.to/3Po4xga
🚗 EGR & Carb Cleaner ~ amzn.to/43S6plM
🚗 Socket Set - amzn.to/3TEvZWt
🚗 Work Gloves - amzn.to/3wROsW0
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2023
Read important information below:
Disclaimer:
My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts. - Авто та транспорт
Thank you. I changed the starter motor on my mums micra by following your instructions
Very clear and detailed! I like that you did not miss any steps.
Thank you again!
You're very welcome, thanks for watching !
Thanks for all your k12 videos ! I fixed a lot of problems by referring your video
You're very welcome, thanks for watching !
I'm enjoying you Micra K12 video's, I have Nissan March AK12-2002,Thank You.
Thanks for watching !
спасибо. очень полезные видео. жду следующее, не менее важное, а именно: проверка форсунок.
I love your Videos thanks
Thanks for watching !
Super Thanks
I'm enjoying you Micra K12 video's, my son has just bought his first car and we are checking your videos for faults he has to fix. If possible could you do a video on adjusting the headlight beam to get past the NCT please ?
Thanks for watching. I can't do that I'm afraid as you need to use specialised optical beam setting equipment. You'll probably have to have that carried out at a garage.
@@screwsnutsandbolts Thanks for replying, i guess we were hoping for a ChrisFix type of headlight adjustment tutorial. He has an old video about it, but we're interested in learning where the K12's adjusters are. Thanks again and keep up the good work
I'll have a look and see what I can find
Hi, if you pause this video at 3:18: ua-cam.com/video/Y5Rvv7HoR74/v-deo.html you can see the left/right adjuster at the bottom right of the picture (the black plastic threaded lug) and the up/down adjuster is the white pot at the top right of the picture (on the top of the headlight adjuster unit). The Nissan manual states: CAUTION: Adjustment with the aiming adjusting screw must be done in
the tightening direction. (When adjusting in the loosening direc-
tion, first loosen the screw, then tighten again.)
Great job thank youfor so much
You're welcome !
Can you make a video tracking down high idle cause
Excellent Video and very well explained .Thank you.
You're welcome!
Super
Thanks !
Brilliant video’s. Does this make it easier to access the starter motor?
Thank you, Yes it does indeed. That's how I removed my starter motor. I haven't uploaded the video yet
@@screwsnutsandbolts Great 👍🏻 I’ll keep a eye out for that video. Thanks for replying 👌🏻keep the videos coming great watch.
@@Couldntthinkof1gudenuff I just uploaded the starter motor video this morning, cheers. ua-cam.com/video/3N-hq4fh_dM/v-deo.html
Možete li reći uzrok slabe vuče, šta trebam provjeriti? Hvala vam
Hi, just about to change the starter on my daughters K12 using your other video!! so will be changing the manifold gaskets when i have this apart. can you highlight where you add the air housing sealing ring didnt see that in the video... is it 4 of these i need?
I didn't change those and I don't have the Micra any more I'm afraid. Yes you need 4 of them and the part number is: Nissan 14032AX610. Double check that part number to be sure.
Thanks for the quick reply, I guess I might as well change them if I have the manifold off daughter will be keeping the car for a while...
The again maybe not... they are £40 for the 4 of them!!! Starter motor replacement is starting to add up!!!
You're welcome, yes they're quite expensive alright. I would only change them if they're badly split or damaged
Sorry one last question on this, planning it for this weekend... If we disconnect the battery will we need the radio code? Not sure we have that so might need to remove the serial number to get the radio details to get the code before I can do the starter.....
What sort of issues would you get with a bad intake manifold gasket
If the gasket is leaking it will create a vacuum leak at the manifold. This could cause a check engine light due to an incorrect MAP sensor reading. You might notice a hissing sound when the engine is running, the engine may be hard to start or it may have a rough idle.
Difficult to start, especially when the engine is at operating temperature. The mixture becomes leaner, which also increases the combustion temperature. Also recognizable by a particularly white color of the spark plugs. If the vacuum in the intake manifold is too low due to a leak, the check engine light should also light up.
привет друг! спасибо за видео. какой номер у воздуховода к двигателю?
This one ?: 16554AX605
@@screwsnutsandbolts спасибо!!!! этот.
You're welcome !
You know where i can buy the 4 bolts for the manifold 😮 - got slight hissing and high idle - want to change the gasket plus rubber parts plus 4 new bolts - 🔩 somebody lost the left bottom when servicing probably and fitted a dofferent bolt - that is the issue i think
Going to have a look down the scrap yards try and buy whole manifold gasket and bolts etc
This might help with the part number: nissan4u.com/parts/micra/el_k12e/2003_8/type_12/engine_mechanical/manifold/illustration_1/