Diagnosing and Replacing a Faulty Ignition Coil - Nissan Micra K12
Вставка
- Опубліковано 20 січ 2023
- Diagnosing, removing and replacing a faulty Ignition coil pack on a 2003 to 2010 Nissan Micra K12 using a basic OBD 2 code scanner.
Error Codes:
Error Code 0300 (Multiple Cylinder Misfire)
Error Code 0301 (Cylinder Number 1 Misfire)
Error Code 0302 (Cylinder Number 2 Misfire)
Error Code 0303 (Cylinder Number 3 Misfire)
Error Code 0304 (Cylinder Number 4 Misfire)
Possible Causes:
• Improper spark plug
• Insufficient compression
• Incorrect fuel pressure
• The injector circuit is open or shorted
• Fuel injectors
• Intake air leak
• The ignition signal circuit is open or shorted
• Lack of fuel
• Drive plate or flywheel
• Heated oxygen sensor 1
• Incorrect PCV hose connection
Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Ignition Coil ~ amzn.to/3XIrs7j
🚗 Socket Set ~ amzn.to/3BmbuHr
🚗 OBD Code Scanner ~ amzn.to/3QXsLfV
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2023
Read important information below:
Disclaimer:
My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts. - Авто та транспорт
![How to change spark plug on NISSAN MICRA K12 [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/wdVryJK3ayU/mqdefault.jpg)
I've watched a few of your videos regarding the Nissan Micra as we have just recently got one. Your attention to detail is superb. I'm truly impressed that absolutely every little bit of disassembly and reassembly is covered with text information too. Even bolt sizes and part numbers. Just brilliant. Thank you.
Thank you very much !
The video assisted me very much.I own nissan micra/march k13 2013.it started with engine light staying on.I changed one of ignition coil and spark plug which were burnt.The light dissapeared and acceleration and power improved
Thanks for watching !
Thanks a lot for your videos mate i have just bought a Nissan micra k12 watching your videos im doing service the car on my own i appreciate your help 🙏🏻
You're welcome, thanks for watching !
Excellent - I should have watched this a few days ago before my trip to the garage .
Thanks !
Good diagnising and repecing coil. I like this vidio.
Thank you very much!
Excellent contents. Thank you.
You're welcome, thanks for watching !
Thanks a lot.
You're welcome !
thank you
You're welcome
Nice video brother
Thank you !
Thanks
You're welcome
Can i do a coilover guide for the micra? Want to replace mine as the rubber inside is ripped. Or cv boot as well
Good day
I have a k12 about 3 month and your videos are so very helpful for me servicing the vehicle and I thank you for your time and effort.
Question, what's the part number for the coil packs please.
Thanks again.
You're welcome. The part number is NISSAN 22448-AX001
@@screwsnutsandbolts thanks alot 🙏🏾
Thank you again.
Why did Nissan designed the air cleaner assembly to cover the engine?
Long are the days we can see the engine when we open the bonnet!
Yeah the K11 was so much easier. Progress eh.....lol
Coll
hi ive got the same 1.2 but under light accerlation it starts to make a chatter noise @ low rpm but under heavy accerlation its fine just not as strong. also no check engine light on
Is the noise definitely coming from the engine ?
Anybody found a cheap obd scanner that works on k12 the one in the description is no longer available.
hello, can you please answer, I have a long start on a nissan micra 12 petrol, what could it be, it starts very hard, I changed the engine starter and it still starts hard, thank you
Hey i have a 2002 one and having problems with it starting. It starts sometimes and runs okay then others it winds up but doesnt start and is having problems with cutting out. My dad thinks it may be a relay
That could be a lot of different things. You'll probably have to have a mechanic take a look at it and diagnose the problem.
Hi. My 2003 micra engine won't start no spark. RAC couldn't find fault and towed to garage. Do you think it could be crank sensor?
That's one possibility
@@screwsnutsandbolts It was the cam sensor. Thanks
Got a p0300 code on mine at the moment, it’s 2010 year. What could be the cause of this code? Resistance on all the coil packs are1.7ohms
It could be faulty spark plugs, a faulty sensor or something else. You'll probably have to have a mechanic diagnose the issue
scanner detected code is not trustable??? simply replace bad with good. remove connectors and bolts, then replace the coil, install again connectors and nuts, then again remove connectors and bolts, put the good coil in cylinder 4, finally put the connectors and bolts back
What size bolts are they
They're all 10mm bolts
Can you please help me.
I have a 2003 micra k12 with the same problem but on
cylinder 3. I have change the Ignition coil on the cylinder 3 but when i start the engine again the car still work exactly like before. The engine shaking. What have i doing wrong. I have change the sparkplug and the Ignition coil but still the engine is working bad.
Please help me.
Did you confirm that the problem is with cylinder 3 ?
@@screwsnutsandbolts Yes, my diagnosis showed that cylinder 3 has misfires. And i have change the Ignition coil on and the sparkplug but still the engine work like before
There could be a problem with the injector or some other issue. Check this link: www.breakerlink.com/blog/maintenance/engine-misfires-the-main-causes-and-the-symptoms-of-misfiring-you-must-not-ignore/
@@screwsnutsandboltsThank you for the help i appreciate it
Hi there , i have got a problem with the car engine
I tried to change all the sensor ( crank sensor, cam sensor, oxygen sensor and the maf sensor) the engine can run for 1 to 2 minutes than stop itself.
I try everything but no solution
My car is an nissan micra 2004 please help me!
That could be a number of issues. Are you getting an engine warning light on the dash ?
@@screwsnutsandbolts yes the engine warning it shows on the dashboard
I'm really struggling to fix this issue
And the engine keep swinging when I try to start it