DIY Dodge Ram Fuel Pump Replacement! Crank but no start 2009-2018 Ram
Вставка
- Опубліковано 11 тра 2023
- I fixed the crank but no start issue. How to diagnose a bad fuel pump and how to install one!
THANKS FOR WATCHING! !LIKE! !COMMENT! !SUBSCRIBE! !SHARE!
Make sure to checkout my Instagram to keep up to date on all the builds and offroading trips
insta: carfleet_?... - Авто та транспорт
Great video. Changed my fuel pump today. One thing to note, I have a crew cab, so I still had to unhook the 2 straps and use a jack to lower the tank enough to replace the pump.
thanks
O dang that’s good to know for people with a crew cab
What 2 straps this is gonna be my first time taking my bed off and wym lower the tank
@@savagedolo2626 there's 2 straps that hold the tank in if your dropping it from below the truck. Taking the bed off you don't have to remove the 2 straps because your accessing it from the top of the truck
Glad I saw this comment before attacking mine.
So if you have a crew cab you should drop the tank?
“If your truck fixes itself, it’s definitely not fixed” lmao
I love that retrospective analysis while you’re sitting on the side of the road.
Hahaah I was so rattled
@@Carfleet all been there. I have my bed off right now had to make a run for a new electrical connector and fuel line clip.
Truck’s back together now. I let pump prime a while and cranked it. It started right up, definitely think that was the fix. I had to buy new fuel line clips and a new electrical connector pigtail too.
Fuel line clips:
“dorman 800-015”
Electrical connector:
“Standard Ignition 4 Terminal Multi-Purpose Connector - S1410”
@@Javii96 nice man glad it worked out
Dang. Still not starting this morning. Back to the drawing board
Solid work Brendan!
Great call on just pulling the bed instead of dropping the tank.
One of my old coworkers used to always say “even if you just go mudding once you’re truck will never be the same” 😂😂😂
Thanks bud! Ya no matter how many times you wash it there’s mud somewhere
Nice work bud. The Ramski lives again!!
Yaaa buddy
Awesome work man 👌
Thanks Matt!
Hard to believe it’s easier to remove the box rather then lower the tank , good job 👍👍
On a non rusty truck it’s not easier but for mine it’s definitely easier just so I don’t snap the tank strap bolts haha
You are a determined man, my Ram needs a fuel pump, my buddies say cut the bed, then patch the hole. You took the long route. I did have it undercoated so not much rust for KCMO driving. Well i hope tank bolts comply & i respect your hard effort sir.
Thanks haha ya my tank bolts would’ve snapped
Seems like it might be dangerous to cut the bed .... all those sparks on the cut, and then ...re-weld it over the plastic pump parts on the gas tank? Seems dangerous. Maybe ok with some sort of well placed asbestos blanket or something.
On my 2010 4.7, the fuel pump is in the middle of the bed and cabin. You stilñ have to drop the tank a little to move over and change the pump
Excellent Gracias Amigo
Cool to know i can get at it from the top but i think im going to just drop the tank good video though its a sweet truck
Thanks!
Was experiencing the same issue , after a fuel pump replacement issue persisted . Had to do a module bypass to get it to work. 11’ single cab still running as of now.
I have a 16 Ram with the 3.6l and I’ve only had it a year but the previous reports show fuel pump replaced multiple times already. And now i have check engine light for fuel pump. What is this module bypass??
Nice job on bed removal and pump replacement, but l can't believe you put that plastic hat back on the pump. Thing looked like a dirt magnet. I have never seen so much dirt on top of a pump assembly 😊
Hahah it’s like a bucket
Did you have a Check engine light on because of it ? And if so did it go away after you put the new pump in ?
My check engine light was on before and after the fuel pump becuse of my gas cap
Would this work for a 2019 1500 classic? 5.7 as well
I’d assume but not 100% sure
For your stock fuel pump, was the connector male or female? I have a 2014 5.7 and I can make heads or tails what the connector would be
The part on the fuel pump was male
@@Carfleet you’re a absolute legend ❤️
@@seankane5489wait are you talking about the electrical plug or the fuel pump itself
How long did it take to take the bed off?
Mine has a bunch of goofed mods haha a regular bed hour tops
Our truck died with the same issue...the dealer thinks the battery died and it magically fixed itself without them replacing anything! Maybe I'll send them this video!
Might have to haha
Hi is the fuel pump you put on still running good?
Yup it’s still good
Hey dude, I have the same issues. This is my third fuel pump within a year so I’m thinking of doing a custom fuel tank and fuel pump. I could have some issue in the electrical front with too much resistance so the pump is working overtime with current burning it out. Anyways I’m thinking of doing a custom fuel cell with an accessible waterproof door to replace them easier lol
What happened? Did you get aftermarket
@@aguilaleon100 Hi I got the same Trugrade fuel pump from autozone but I trouble shooted and discovered there’s a short in my fuse box along my relay. The pump is working continuously as my battery is powering the fuel pump and it’s pumping the fuel back to the tank as it’s designed to do with the engine not running. So I disconnect the battery every time I park until I can successfully figure out where my short is.
Damn it, tough cookie. I just replaced mine with an oreillys one. It was perfect for about 3 weeks and i took the truck on 3 hour trip and check engine turned. Something about the Fuel pump high circuit sensor. Dont if its a faulty pump or some short. Before i replaced the pump i would turn the key and dash would turn off and on and wouldnt start until 2 or 3rd attempt.
@@aguilaleon100 is yours a 2012-2014? Chrysler designed the TIPM to have an internal fuel pump relay and it doesnt have an external 5 pin plug relay. You might have to take apart the fuse box and solder on a new relay. look up on youtube 2012 dodge ram TIPM fuel pump relay fix. When you have the TIPM apart also look for anything out of the ordinary like burnt out pins from the board this would indicate too much resistance and more current is being sent to bypass that part of the circuit. Another thing to try is to test the fuel pump to make sure they did not give you a bad one.
Thank you my friend i was just seeing a video over the external fuel relay job.
When I’m at a gas station I have to let the gas flow slowly unless it’ll stop what would be the cause of that
Something with your vent might be plugged up
What pump did you go with
Rock auto will have to see what brand
My 16 doing the exact same. No fun
How heavy was the bed?
Mines chopped a little not to bad 2 people could move it
Yeah…mine (2011 quad cab) isn’t that simple. We did this exact thing but the fuel pump is halfway between the cab and bed. So, now we still have to drop the tank
That’s a rough bounce
Yes tell me about it dumbest thing ever lmao
What does it mean if it doesn't crank at all, but after 20 key turns it turns on....
Means she’s loyal
Fuel pump stops in a bad spot in the motor. Runinning shouldnt be an issue if its just starting to go bad.
So just jump from no start to fuel pump, think I would do some electrial investigation 1st.
It worked didn’t it