Who is interested in this product? We are not offering at the moment but if we get enough demand we would be happy to start building more! Pricing will be set around $400! Please let us know!
A well known Jeep builder does 1" body lifts and always gets a hard time over it. One reason was to make a flatter belly pan by clocking the t-case higher. Another was because most of the weight stays lower than an addition inch of suspension travel.
Now that’s a great idea for those of us that have the Chevy RoadTrek’s that would move those side fairings used for storage up a inch get them off the ground alittle more. If it could be done as there is a lot of stuff going on under there to make it the way they did...🎩 Iam interested💥💥
I had a truck with a body lift kit a longggggggg time ago. It ended up looking very hokey and it never really settled correctly. There were all kinds of squeaks and the bolts always ended up loosening up.
with the 1 lift is there any other work that needs to be done?steering collum extension?brake lines relocated or extended?(I already have 2 blocks in back and spring spacer up front)and does the radiator shround need to be cut or a spacer put in ?
Who is interested in this product? We are not offering at the moment but if we get enough demand we would be happy to start building more! Pricing will be set around $400! Please let us know!
Definitely interested
I would buy it for my 2013 Ford with the BGG! It makes a big difference. Every inch you add makes a impact. I need them to go with new 35” tires.
A well known Jeep builder does 1" body lifts and always gets a hard time over it. One reason was to make a flatter belly pan by clocking the t-case higher. Another was because most of the weight stays lower than an addition inch of suspension travel.
Yes!!!!! An extra inch would help so much.
Me too, maybe just for the front at this point but possibly front and rear.
We also done that to my Chevy Astro van and it worked like a charm
What a nice simple way to get just a little bit more lift out of our express van's without heavy fab. Thanks for another great video.
Jeremy is that roof rack manufacturered by weldtech? I dont see anything on your website? Sick van , love it!
Now that’s a great idea for those of us that have the Chevy RoadTrek’s that would move those side fairings used for storage up a inch get them off the ground alittle more. If it could be done as there is a lot of stuff going on under there to make it the way they did...🎩 Iam interested💥💥
I had a truck with a body lift kit a longggggggg time ago. It ended up looking very hokey and it never really settled correctly. There were all kinds of squeaks and the bolts always ended up loosening up.
Van looks Great! Good job!
Now that you are addressing what I would also do in addition to the suspension lift, can we block up to 4" or 6" on a Ford E350 1995?
Where do you get that roof rack, bumper, ladder combo
What's the total cost of that van with all the upgrades?
I believe 110k but check out Jeremy’s video on it and he will tell you.
125K plus more realistic # with all hours in this build.
When you lower it’s usually down rarely do you lower up😂
What size bolts did y use
Is this the 15 passenger van, long wheel base?
Body lift's look goofy. Like a short person wearing lift shoes.
That's why it's only 1"
Any idea if this would fit a 98-02 express/savana?
Where did you get the bumper and ladder together?
with the 1 lift is there any other work that needs to be done?steering collum extension?brake lines relocated or extended?(I already have 2 blocks in back and spring spacer up front)and does the radiator shround need to be cut or a spacer put in ?
Some of these need the rad shroud dropped.
Did u do the seats in the van ? And do u plan on bringing it to SEMA (if sema is on )
Yes this van does have all of our seats in it. Sema 2021 is on and we will be there in the @Lightforce Booth
Why one inch for all this work ? 1.75 ? unless there are electrical/fan shroud/filler neck/steering ) limitations ?
Exactly plus brackets to change bumpers and steering......
Boa tarde FIRST vai amém bom trabalho
How much?
Everything on these vans costs twice as much as any other truck. I may as well bought a Mercedes. LOL
Mercedes stuff is 5x more..... More then a house in most of the country.
Just priced an empty 4x4 Mercedes... $69,000
@@WeldtecDesigns It was being a little sarcastic. LOL
@@tommyd1963ify My first house was less than that. Yikes.
I know people who live in houses that cheap. A 6.6 might even tow them, but a Sprinter won't!