How to Change Your Kinetico K5 Drinking Water Filters (It's Easy!!)

Hey guys in this video I will be showing you how to properly change your drinking water filters/cartridges in a Kinetico K5 Drinking water station. This video is specifically on the K5 but you can follow the same steps for most of Kinetico's drinking water units such as the A200 or deluxe plus.
Disclaimer:
Due to factors beyond the control of Kasey Sirak, I cannot guarantee against improper use or unauthorized modifications of this information. Kasey Sirak assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Kasey Sirak recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Kasey Sirak, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Kasey Sirak.

[@matthewablakan]

Just changed the same filters for the first time. Your video was the second one I watched because the first one absolutely sucked. Yours was dead on. Thank you!!!!! Saved me lots of money over here at a time when we need it 🙏🏼 God bless

[@lokidogproductions1289]

Thanks the tip on the last filter was what was giving me trouble on the change. So few talk about that, appreciate you did. It really just does not get mentioned in most other videos! SO MANY THANKS FOR COVERING IT!!!

[@preferredprovider1958]

I wish I would have saw your video before I changed my filters. I struggled with the orange one but now you showed me the trick to do so. Thank you!

[@GregBeaty]

Good job with the training videos.

[@taramccarthy446]

Thank You for this Video. I wish I would have watched this before I tried to change them. Thanks

[@kryzto8368]

Thank you for this brother. Probably saved me hundreds.

[@kryzto8368]

Thank you, Sir. Doing the Lord’s work over here.

[@DaveInLAS]

And saving marriages! 🤣🔥

[@smileyface3844]

Thanks!

[@JeffMizgala]

Great videos on the kinetico system. My brine tank isn't getting much water. Not coming above the plate. What do you suggest? Thanks

[@raechel5806]

Thank you ❤

[@MS-ze2xm]

The orange filter with the blue indicator is metered for 500 gallons, after that it won't allow a flow. What do you use to clean the resin beads?

[@gainswithkathy]

Can we by pass and continue to use the same current filters longer? Is it as simple as just untwisting and twisting back in?

[@adamotak5145]

do you know how long the memberance filter last or when to change it i have a200 system kinetco said its should last 3 to 5 years

[@jenniferbyrne4567]

Where do you get the silver cartridge

[@jamesscott2559]

I just came across your channel while researching kinetico water systems. Is troubleshooting most of the problems you come across DIY friendly and how hard is it to replace parts? Is there common problems you come across regularly?

[@raix63]

I am seeing water in the blue tab and my tank isn’t filling up. The filters was just replaced about a month ago.

[@jackstorm22]

Should sediment prefilter go before or after CRS 1100? I added a CRS recently after softener install last year. My flow is city chloramine water to CRS then sediment filter then to softener. Can I expect a reduced life expectancy to my CRS by having the sediment prefilter come after CRS and before the softener?

[@kaseysirak]

I prefer the sediment filter to be after the CRS1100 and before the softener. I prefer doing it this way to protect the water softener from any carbon sediment that may be introduced into the water supply by the crs1100 over time. No prefilter on the CRS1100 should not affect the service life of the CRS1100. The water softener is the piece of equipment with all the complex hardware in the head "that could easily be clogged by a piece of carbon" while the CRS1100 is essentially a straight through filter no real moving parts to be worried about.

[@jackstorm22]

@@kaseysirak thanks!

[@dexceejaycassy8024]

If your kinetico not metering what is the main issue can you help

[@kaseysirak]

I plan on making a video very soon going over the cap area in the level 1 which is responsible for metering.

[@dexceejaycassy8024]

Ok thank you