This is a good example of why the LG24 coil is a great compromise between the LG30 and LG15 for separation. I run the LG24 on my Legend 99% of the time and love it for trashy sites. Went to one yesterday that was loaded with pulltabs and still found some coins in the middle of that garbage. The Legend is a great detector at a great price.
Very good approach! Could you please explain why you change IF, ST and how they interact? I have always assumed the lower the IF, potentially a higher ST is needed. I have always used and IF of 3-4 and usually a ST of 5. How should the two be adjusted together? Thank you.
St is really there to fine tune the if to the water content of the ground, so say you run a 3if 1st , and okay with it then there’s a downpour , you can increase st without having to increase a full step to 4, therefore finer tuning and not costing you much performance loss in unmasking
thanks for this we need some one to 3d print a design like this then we could make it a standar test product ofc the items you stick on will be diffrent but the principle will be the same like you say the coil plays a big part when people say a 9" coil cuts thru better than a 13" coil its a strange one as if the ground is more littred tight round the target the 13" coil will probably do better than a 9" coil but if the junk is little a little wider round the target the 9" would do better and the 13" would be worse its allmost like inverted controlls feels weird to think about it that way but its kinda how it works
Would love to see a beach mode test wet and dry using v 1.15. I have issues with it in water. Constantly getting 10 on VDI. I tried lowering sensitivity still the same. The beast mode works very well on dry sand and deep
This is a good example of why the LG24 coil is a great compromise between the LG30 and LG15 for separation. I run the LG24 on my Legend 99% of the time and love it for trashy sites. Went to one yesterday that was loaded with pulltabs and still found some coins in the middle of that garbage. The Legend is a great detector at a great price.
I've got Legend with LG30, and LG24 is on the way. For me, this detector is top of the top. After update to 1.15 will be my number one for long time.
Very good approach! Could you please explain why you change IF, ST and how they interact? I have always assumed the lower the IF, potentially a higher ST is needed. I have always used and IF of 3-4 and usually a ST of 5. How should the two be adjusted together? Thank you.
This might be what your looking for
Iron Filter And Stability - EXPLAINED!!! Nokta Legend
ua-cam.com/video/F8WE19jF6LU/v-deo.html
St is really there to fine tune the if to the water content of the ground, so say you run a 3if 1st , and okay with it then there’s a downpour , you can increase st without having to increase a full step to 4, therefore finer tuning and not costing you much performance loss in unmasking
Thanks so much, mate! After seeing some comments on the Legend Users group, I think a number of us weren't clear on when and how to adjust ST.
thanks for this we need some one to 3d print a design like this then we could make it a standar test product ofc the items you stick on will be diffrent but the principle will be the same
like you say the coil plays a big part when people say a 9" coil cuts thru better than a 13" coil its a strange one as if the ground is more littred tight round the target the 13" coil will probably do better than a 9" coil but if the junk is little a little wider round the target the 9" would do better and the 13" would be worse its allmost like inverted controlls feels weird to think about it that way but its kinda how it works
good video i still not keen on the 1.15 update still running 1.13 deep, stable, and good tones which works for me
i prefer 1.13, be nice to get the DT added as part of that version
Great video, thanks for sharing
Fascinating, good test.
Thank you! Cheers!
Great information. Thanks for sharing 🙏
Glad it was helpful!
I don't understand, does the legend unmask better with a high if than with a low if? how is it possible?
Low if better unmasking
@@HistoryRevisiteduk What is the best frequency to unmask coins such as Roman denarii in the middle of iron?
Would love to see a beach mode test wet and dry using v 1.15. I have issues with it in water. Constantly getting 10 on VDI. I tried lowering sensitivity still the same.
The beast mode works very well on dry sand and deep
sounds like you need to do a ground balance also try messing with stabilty and ground surpressor
@@HistoryRevisiteduk I've tried all that. I will go back to 1.09 and see if it helps
Thanks for vid.
No problem!