Always double check your holes before movin on...that way too long dig around the 19 minute mark was brutal...you know a lot but far from everything. Not sayin I do, but this is diggin 101 type stuff.
Nice video sid keep them coming love my 9 inch coil my go to at the moment have all the manticore coils and still use the deus 2 but prefer the beast lol 👍 shaune in Kent
I am happy to do some more if you enjoy them. I was think of recording until battery runs out which is about 50 mins or so. just edit out toilet breaks lololol.. don't want the girls pestering me all the time ay
Keep these coming! This sort of hunting is similar to some I do. I have been detecting for about 56 years give or take, but I am always way open to suggestions. You make a whole lot of sense. Thanks!
Nice presentation Sid. Answers a few questions for me. Think the M9 has found a way into my suitcase. 9 weeks not that we are counting. Glad you got on the hammered. Especially since it is a place you’ve flogged. Take care mate 🦘🦘😁👍
High conductors great for the larger targets and is slightly less sensitive so if you getting pestered with miniscule nuisance targets hc is a good choice too.
The M9 , thinking it gets depth , same as 11 & 15 . I’ve put the bottom ferris bar up a couple of notches and it seems to have stopped the iron falsing . The only issue is finding you miss a bit as it’s a smaller coil . Good clip & it’s actually getting on with it rather than getting distracted!! All the best 👍
we have a roman site - full of iron and minerals. We have nox and mantis - tend to run it hot as it seems to pick out the signals better, but i will give it a go on lower sensitivity and see what happens....and with big coil (15"). Saving up for a 9" Nice vid
On a roman site I would use recovery 6 or 7, turn off stability and set to zero. Sens set just so it's not falsing, set upper limits to suit land, less the better so just eliminating the iron that's creeping through... dug everything 2 and up... Good luck buddy
@@englandshistory if it like that, i just increase the stabiliser to 2 and it makes so much difference without having to adjust the sensitivity. I generally run between 26/28 and it’s quiet even on my iron infested sites (using M9)
I prefer watching the shit get dug as well as the good stuff, it portrays the hobby in true light
🎉🎉🎉🎉🎉 nice way to go beast magic lol 😂.
Always double check your holes before movin on...that way too long dig around the 19 minute mark was brutal...you know a lot but far from everything. Not sayin I do, but this is diggin 101 type stuff.
Most decent detectors would find that too .
Love to see the colitex 18" on that field
Nice video sid keep them coming love my 9 inch coil my go to at the moment have all the manticore coils and still use the deus 2 but prefer the beast lol 👍 shaune in Kent
nothing there the equinox wouldn't have found 😮
Equinox is a brill machine for sure
sorry sid 😂 but could you share your settings please.
Manticore beast programme
ua-cam.com/video/iNpfZG3Ubr8/v-deo.htmlsi=PpOvCmUVrYvlQmR8
Much prefer this type of film to your other ones on the big digs, can learn something from this, like your explanations.
I am happy to do some more if you enjoy them. I was think of recording until battery runs out which is about 50 mins or so. just edit out toilet breaks lololol.. don't want the girls pestering me all the time ay
The realistic side of detecting is how I'm learning, from digging the good and the bad all helps.
Keep these coming! This sort of hunting is similar to some I do. I have been detecting for about 56 years give or take, but I am always way open to suggestions. You make a whole lot of sense. Thanks!
Great vid Sid, Have found with the M9 coil nearly touching the ground it just loves the small bits and has great depth
Nice presentation Sid. Answers a few questions for me. Think the M9 has found a way into my suitcase. 9 weeks not that we are counting. Glad you got on the hammered. Especially since it is a place you’ve flogged. Take care mate 🦘🦘😁👍
Great video Sid thanks for the tips with the Manticore. I have tried the Manticore in all terrain high conductors and its finding deep targets
High conductors great for the larger targets and is slightly less sensitive so if you getting pestered with miniscule nuisance targets hc is a good choice too.
The M9 , thinking it gets depth , same as 11 & 15 . I’ve put the bottom ferris bar up a couple of notches and it seems to have stopped the iron falsing . The only issue is finding you miss a bit as it’s a smaller coil . Good clip & it’s actually getting on with it rather than getting distracted!! All the best 👍
Manti beast. Cracking video mate. You was clutching at hammered for a second like I was roman last week 😂😂😂
well in sid , gotta be more
good to see you back out detecting seems like forever since seen you do your own thing need more content :) well done on the finds
Great video as usual Sid, keep em coming.
Thanks Sid. Enjoyed that x
Always look forward to a vid from Sid.
we have a roman site - full of iron and minerals. We have nox and mantis - tend to run it hot as it seems to pick out the signals better, but i will give it a go on lower sensitivity and see what happens....and with big coil (15"). Saving up for a 9" Nice vid
On a roman site I would use recovery 6 or 7, turn off stability and set to zero. Sens set just so it's not falsing, set upper limits to suit land, less the better so just eliminating the iron that's creeping through... dug everything 2 and up... Good luck buddy
@@englandshistory will give it a go - it's stopped producing with our 15" coils. cheers mate
Top video as always sid 😃
wicked pal loved video
Thanks for vid
Nice 👍
Sidney!
Nice one Sid 😊 you've had that pin pointer for a while is it still as good?
I've only charged it once and it still has full battery, I think it's a great pointer..
@englandshistory cheers mate I must get one👏
What did you have the stabiliser set at?
(I think it helps with the falsing)
Zero and off
It will make the falsing settle but I prefer to just balance with sensitivity
@@englandshistory if it like that, i just increase the stabiliser to 2 and it makes so much difference without having to adjust the sensitivity. I generally run between 26/28 and it’s quiet even on my iron infested sites (using M9)
Terrible falsing machine slows down the search would drive me mad chasing all that falsing no thanks
It can be annoying on certain fields
It has a stabilizer setting which would calm it down
Nice video mate👍