καλημερα απο ελλαδα εισαι παρα πολυ καλος μαστορας πολυ προσεγμενη δουλεια που τα τελευταια χρονια δεν την κανει σχεδων κανεις μπραβο να εισαι καλα και να εχεις υγεια
Que buen Jale ases Bro, me acuerdo mandandote un mensaje en el 2010 queriendo que me asieras un Jale i tu me respondiste que no tenias taller pero la estabas pensando mucho habrir uno. como pasan los Anos carnal. asta esta fecha nunca me ensene a tapisar pero siempre fue algo que me interesaba, ojala que estes bien y te la pases super en estos dias festivos..
Estimado amigo, me da mucho gusto recibir este amable comentario. Nunca es tarde para aprender algo de tapicería, solo hay que decidirse sin pensarlo mucho y comenzar con algun proyecto que tengamos a la mano., aunque sea pequeño. ¡Le deseo lo mejor en compañia de sus seres queridos en estas Fiestas Navideñas y un Próspero Año Nuevo 2024!
He usado una máquina industrial de triple arrastre Pfaff 1245-706/47 ua-cam.com/video/U3HBXBDDKoo/v-deo.html Siempre estas máquinas tienen dos piés prensatelas. Para este diseño tuve que adaptar/crear unos angostos para que corran en los canales de bajo relieve con más facilidad, sin dañar los lados laterales. Un cordial saludo desde México!
Love your videos... Just started learning with a Juki lu562..... Picking up an old singer double needle needle feed machine tomorrow. Can you tell me where to get a set of those angled pliers you use in many of the videos... They look very handy.
Those are called 'orthodontic pliers' www.amazon.com/Orthodontic-Position-Appliance-Bending-Instrument/dp/B07CSMFFGV/ref=sr_1_8?keywords=orthodontic+pliers&qid=1703737
Es un pié de presión casero (prototipo que puede ser mejorado) especialmente para coser en ranuras de bajo relieve. En este otro video muestro uno parecido que fabriqué a mano: ua-cam.com/video/Je_-Y7cdlEU/v-deo.html
The substrate is MDF cardboard 3 mm thick. The reliefs were glued down over a thin cardboard called Celtec used for shoe's insoles. The white material is called Latex Eva foam 6 mm thick mostly used in the shoemaking industry for insoles too.
Hey Ceasar if y9u have time could you pist a link the celtec matetial you are using in you recejt barch of videoss? Im fi ding to manny different types ans id like to buy the correctone to give this type of project a try! Thabk you in advance.
I get this cardboard from local suppliers (shoemaker's stores)here in Mexico. The grey Celfil board is more flexible and softer. Hopefully this link is useful: www.avetcoinc.com/product/celtec-board/?attribute_pa_package=4-sheets www.avetcoinc.com/product/celfil-r/?attribute_pa_color=gray
@Cechaflo thabk you sir I really appreciate it. I could not really tell how thick the material was and didn't want to buy the wrong stuff. I'm wxcitted to give this a try
The thin flexible cardboard is 1 mm thick. The cardboard base is 3 mm thick. The pink board is called celtec. There is another grey one much better called celfil
The leather is sewn over a thin 1.5 mm thick cardboard. This cardboard (soft and flexible) is used for shoe's insoles. www.etsy.com/mx/listing/783628954/plantillas-para-la-fabricacion-de After sewing this thin cardboard should be glued down (wood glue) over the real door panel.
Estas máquinas usadas generalmente se consiguen en los talleres que reparan máquinas de coser industriales. También por internet en el mercado libre. Anuncios en el peripodico. En páginas de facebook que anuncian lo relacionado con tapicería, costura industrial, venta de máquinas de coser, etc. Esta maquina es industrial de triple arrastre Pfaff 1245-706. Tambien esta la Pfaff 545 H3, Consew rb 206, Juki lu 563, etc.
@@Cechaflo ok thank you, so a shoe insole type cardboard. Is this the case for doing custom door panel design also Cechaflo? Also is your online courses still available? What is best, an industrial sewing machine or walking foot?
@@2094Ryan I have used an Eva foam (latex) as padding. Almost similar to landau foam used for car door panels too. www.cechaflo.com/courses Nowadays, walking foot (double or triple transport) sewing machines are uaed to do upholstery. These are heavy duty industrial machines. ua-cam.com/video/U3HBXBDDKoo/v-deo.html
This is a prototype I made myself to approach deep channels. The second presser feet prototype is the one I show in this video: ua-cam.com/video/4eYokESGr8w/v-deo.htmlsi=3bMW4lyDoX0QwJ9G&t=802
καλημερα απο ελλαδα εισαι παρα πολυ καλος μαστορας πολυ προσεγμενη δουλεια που τα τελευταια χρονια δεν την κανει σχεδων κανεις μπραβο να εισαι καλα και να εχεις υγεια
Amazing work my friend...a fine example of using that custom presser foot too!
This makes me want to break out a grinder and give that a shot!
Beautiful to watch a craftsman at work. Great episode.
Watching a genius at work is a great adventure!? Keep up the awesome work!🙏🏽👍🏽
Difficult work but worth watching. I liked your work very much.🎉
Each piece is a magnificent work of art!
Дизайн конечно на любителя, это не модно, мастер молодец! Машинка супер!
Wow. Beautiful as always. Thanks.
Für solche Nächte gibt es wunderbare 2-Nadel-Maschinen !!!😅
Wonderful job..
عمل رائع
You blow my mind. Beautiful upholstery a Master. Merry Christmas and a happy new year. God Bless. Mark Tennessee
Dear Mark, Merry Christmas and a Happy New Year 2024 too!!!
Looks awesome Cesar!
Eres un gran maestro saludos desde Venezuela 🇻🇪
Wow amazing work well done.
thank you very much to show me good idea
enjoy watching the process
Gracias por sus videos maestro . Muchas bendiciones
O sr é um artista !
Meus parabéns , professor !
ASMR for me. Amazing!
Menuda obra de arte y hay que ver la precisión con la que usted trabaja! 😍😍😍😍😍😍
Son muestras y parte del entrenamiento para hacer un diseño real en un panel de puerta de carro.
@@Cechaflo❤
Süper ❤❤Emeğinize sağlık güzel huzurlu bir çalışma teşekkürler usta
Amazing work!!!!
Just training. I would have liked this design on a real door panel.
The foot of the machine is like the galloping of a horse. Yet it moves slowly in a fashion.
Impressive work.
Aqui se pode dar like antecipado, o capricho é muito grande! abraços!
Прекрасная работа!!!
Muy buen trabajo muy profesional
Genial mestro
Que buen Jale ases Bro, me acuerdo mandandote un mensaje en el 2010 queriendo que me asieras un Jale i tu me respondiste que no tenias taller pero la estabas pensando mucho habrir uno. como pasan los Anos carnal. asta esta fecha nunca me ensene a tapisar pero siempre fue algo que me interesaba, ojala que estes bien y te la pases super en estos dias festivos..
Estimado amigo, me da mucho gusto recibir este amable comentario. Nunca es tarde para aprender algo de tapicería, solo hay que decidirse sin pensarlo mucho y comenzar con algun proyecto que tengamos a la mano., aunque sea pequeño.
¡Le deseo lo mejor en compañia de sus seres queridos en estas Fiestas Navideñas y un Próspero Año Nuevo 2024!
GIFTED 😊
E ae MESTRE tudo bem, sua maquina é transporte triplo ou duplo, obrigado por compartilhar seu trabalho
It is a triple transport sewing machine.
Muy bien maestro perfect.
Es solamente una muestra que se puede realizar en un panel real de puerta de carro u otro proyecto.
saludos maestro
Bonito trabajo de lujo
Good job ❤
Хорошая работа. Есть вопрос -- как вы удаляете следы разметки от серого карандаша??
The white spirits (mineral spirits/white gasoline) is useful. Do a test beforehand on the material you need to take off the pencil marks.
@@Cechaflo Спасибо за совет. Ваше видео всегда очень интересно и полезно. Вы отличный мастер своего дела.
I love this video, and now I'm going to make a presser foot like that. Thank you for this video!
What thread are you using, and why?
I am using polyester thread 138 size. It is commonly used for decorative stitches on top view.
@@Cechaflo thank you
Hola estupendo trabajo!! que tipo de maquina y pie de la maquina usas. Saludos desde España.
He usado una máquina industrial de triple arrastre Pfaff 1245-706/47
ua-cam.com/video/U3HBXBDDKoo/v-deo.html
Siempre estas máquinas tienen dos piés prensatelas. Para este diseño tuve que adaptar/crear unos angostos para que corran en los canales de bajo relieve con más facilidad, sin dañar los lados laterales.
Un cordial saludo desde México!
Love your videos... Just started learning with a Juki lu562..... Picking up an old singer double needle needle feed machine tomorrow. Can you tell me where to get a set of those angled pliers you use in many of the videos... They look very handy.
Those are called 'orthodontic pliers'
www.amazon.com/Orthodontic-Position-Appliance-Bending-Instrument/dp/B07CSMFFGV/ref=sr_1_8?keywords=orthodontic+pliers&qid=1703737
Que lindo quedó !!...... consulta el pie de máquina es casero o me pareció........
Es un pié de presión casero (prototipo que puede ser mejorado) especialmente para coser en ranuras de bajo relieve.
En este otro video muestro uno parecido que fabriqué a mano:
ua-cam.com/video/Je_-Y7cdlEU/v-deo.html
Zoʻr rahmat😊
I really enjoy and appreciate your videos, very helpful. What is that marker you use to draw the line on your material?
The marker is called ' leather silver marking pen' (refill)
www.amazon.com/Leather-Marking-Dressmaking-Quilting-Supplies/dp/B0BRTDRWPY
Hello. very cool work. What is the name of the fundamental substrate, and what is the name of the material that creates the relief?
The substrate is MDF cardboard 3 mm thick. The reliefs were glued down over a thin cardboard called Celtec used for shoe's insoles. The white material is called Latex Eva foam 6 mm thick mostly used in the shoemaking industry for insoles too.
@@Cechaflo Thank you
Hey Ceasar if y9u have time could you pist a link the celtec matetial you are using in you recejt barch of videoss? Im fi ding to manny different types ans id like to buy the correctone to give this type of project a try! Thabk you in advance.
I get this cardboard from local suppliers (shoemaker's stores)here in Mexico. The grey Celfil board is more flexible and softer.
Hopefully this link is useful:
www.avetcoinc.com/product/celtec-board/?attribute_pa_package=4-sheets
www.avetcoinc.com/product/celfil-r/?attribute_pa_color=gray
@Cechaflo thabk you sir I really appreciate it. I could not really tell how thick the material was and didn't want to buy the wrong stuff. I'm wxcitted to give this a try
The sheets are no more than 1.5 mm thick.
i woulda requested that you install my panels with level IV ceramic armor. matter fact can u do that??
If it is an upholstery job I would be able to do it.
I believe him
А что это за белый материал?
Latex Eva Foam. Shoemakers use it for insoles
I never use those cheap throw away blades, always use straight edge razor blades.
thank you. how thick is that shoe board you're using?
The thin flexible cardboard is 1 mm thick. The cardboard base is 3 mm thick.
The pink board is called celtec. There is another grey one much better called celfil
Супер!
Is it 1/4”or 1/2” foam?
The latex Eva foam is 6 mm thick
What is the white material that you’re cutting in the beginning?
As mentioned in the video description it is Latex Eva Foam (memory foam medium density) It is used in the shoemaking industry for shoe's insoles.
@@Cechaflo thank you!
Шикарно, а крепить её на двери как?
The pattern is sewn down over a thin flexible cardboard which is then attached to a real car door panel.
The pattern is sewn down to a thin flexible cardboard which is then attached to a real car door panel.
Спасибо, да благословит вас Господь !
qué número es el grosor de espuma? gracias
It is Eva (latex)foam 8 mm thick
How did you make that presser foot?
I made it out of a piece of iron. A similar process I used for a double needle machine presser foot
ua-cam.com/video/t-0xatZVfVw/v-deo.html
What is the name of the material on which the leather is sewn?
The leather is sewn over a thin 1.5 mm thick cardboard. This cardboard (soft and flexible) is used for shoe's insoles.
www.etsy.com/mx/listing/783628954/plantillas-para-la-fabricacion-de
After sewing this thin cardboard should be glued down (wood glue) over the real door panel.
Donde puedo conseguir una makina como esa?
Estas máquinas usadas generalmente se consiguen en los talleres que reparan máquinas de coser industriales. También por internet en el mercado libre. Anuncios en el peripodico. En páginas de facebook que anuncian lo relacionado con tapicería, costura industrial, venta de máquinas de coser, etc.
Esta maquina es industrial de triple arrastre Pfaff 1245-706. Tambien esta la Pfaff 545 H3, Consew rb 206, Juki lu 563, etc.
How much does such a sewing machine cost? 😊
My machine is used (Pfaff 1245 old version) The cost is around 1000 USD
What is the base you started with, just cardboard?
Yes, the bulky patterns should be sewn down to a thin, flexible cardboard (shoe's insole cardboard)
@@Cechaflo ok thank you, so a shoe insole type cardboard. Is this the case for doing custom door panel design also Cechaflo?
Also is your online courses still available?
What is best, an industrial sewing machine or walking foot?
@@Cechaflo is automotive thread different from sofa thread?
@@2094Ryan I have used an Eva foam (latex) as padding. Almost similar to landau foam used for car door panels too.
www.cechaflo.com/courses
Nowadays, walking foot (double or triple transport) sewing machines are uaed to do upholstery. These are heavy duty industrial machines.
ua-cam.com/video/U3HBXBDDKoo/v-deo.html
What threads do you use!?
I used a polyester thread 138 size.
What is the name of this sewing machine foot?
This is a prototype I made myself to approach deep channels. The second presser feet prototype is the one I show in this video:
ua-cam.com/video/4eYokESGr8w/v-deo.htmlsi=3bMW4lyDoX0QwJ9G&t=802
👍👍👍
Жараисың сау болыңыз Рахмет ақ матералдың аты қалаи аталады астына салған Қазақстан
The white material is called Eva memory foam (latex) Shoemakers use it for insoles.
Рахмет
👍
💚👽
🎉🎉🎉🎉🎉🎉
so so
como se llama la espuma?
Espuma Eva latex con memoria para recuperar su forma después de ser presionada.
Los zapateros lo usan para plantilas de zapatos.