Custom cardboard panel (bricks design) - Automotive Upholstery & Furniture
Вставка
- Опубліковано 13 гру 2023
- ✅Get our courses at: www.cechaflo.com
-----------------------------
The sample in this video shows one way to approach four rows of raised like-bricks design. For this demonstration I am using automotive vinyl for the top surface.
The padding is Latex Eva Foam 6mm thick mostly used in the shoemaking industry for shoe's insoles. The vinyl and foam together are sewn down onto a sheet of thin cardboard 1 mm thick called celtec cardboard. Ifnecessary this cardboard can be rolled over under the sewing machine head to sew larger patterns.
Once the whole sewn pattern is ready it is glued down over another thicker hard cardboard.
This design can be used for car door panels, headboard furniture or others.
I hope you find some inspiration in this video to perform a personal upholstery project!
Cesar - Авто та транспорт
Truly unique and inspirational. You're putting out work that nobody dreams about putting out, and just know we appreciate it.
Как всегда на высоте 👍🙌😉 Привет из России 🙌🇷🇺✊🤝
Remember doing basic thing back in the 90s to put flames and tribal graphics in door panels and headliners.
I WANT TO WISH YOU AND YOURS A MERRY CHRISTMAS,A BLESSED NEW YEAR!! Be safe!!
MERRY CHRISTMAS AND HAPPY NEW YEAR 2024 FOR YOUR AND YOUR LOVED ONES TOO!!!
Merry Xmas to you Ceasar
@@nanakwarteng1415 Same wishes for you too!!! Merry Christmas and a Happy New Year 2024!!!
Beautiful and timeless, a lovely panel piece.
El emeği göz nuru. Helal olsun ustam. Yine konuşturmuşsun.ellerini.ellerine sağlık. Türkiye den selamlar.
Excelente maestro saludos desde argentina!
This design is awesome use of the imagenation!?
The upholstery craft gives us the chance to play with sewings, patterns letting our imagination soar!
So impressive
good
You do amazing work Sir. If I might ask, what is the wood backing board you use and how thick is it please? Thank you in advance.
The backing board is MDF cardboard 3 mm thick approx.
Hello. Wonderful. You always surprise us with your beautiful designs. Thank you
The foot used on this project!! Did you make it??
Yes I made it by hand.
What is the sign - that indicates the use of the heat gun is needed??
It could be a heat gun or a hair dryer. Just enough heat (as if the vinyl would be under the sun rays of a sunny day) to soften the material to make the sewn line get into the crevice under.
👍🔥🔥🔥
What size of the brick/ block? What is the space between the brick/blocks?
The space between the bricks is 6 mm letting the vinyl 6mm thick (both sides) inside the crevice.
The blocks (Eva foam padding) of this sample are 3 cm by 8 cm. The final outcome after sewing is blocks of 3.5 cm by 8 cm.
These measures are optional according to the project we would have in mind, door panel, headboard, etc.
What type foot on machine? What size of thread? What length of stitch?
The narrow presser foot is a customized one especially to run deep and along the lower channel. The polyester thread I used is 138 size. As the sample is small I made stitches 4 mm long.
Hello, what kind of glue do you use and how long does it need to dry before use?
The white foam pieces were glued down to the thin cardboard with the regular upholstery yellow glue.ua-cam.com/video/2-FNpEDMw94/v-deo.html
This time the the thin cardboard was glued down to the thick cardboard using a carpenter's glue. It takes at least 1 hour to dry.
ua-cam.com/video/Y3v2yq2g3oM/v-deo.htmlsi=DuU2umbp701jzXnH&t=822
If we apply the yellow glue to both cardboard surfaces the drying process takes 10 minutes approx.
ua-cam.com/video/2-FNpEDMw94/v-deo.htmlsi=i3Ru0QBkfG_KsIyG&t=1264