Spray Bottle Challenge! | trashbash figure from a single bottle
Вставка
- Опубліковано 23 вер 2021
- Something different from my usual diecast/gaslands builds. In this video you will see me build a trashbash figure only using what I can from a single spray bottle. Bill making stuff inspired me to do this build and I hope you like what I was able to make! He still needs a name so let me know what it should be down in the comments!
Check out my Patreon if you want to help support the channel:
/ bpcustomcreations
Check me out of Instagram:
/ bpcustomcreations
Bill Making Stuff on UA-cam:
/ billmakingstuff
Useful materials and tools:
Pin vise amzn.to/3kSMPBN
Assortment of styrene amzn.to/3usCyPJ
My favorite plastic cement amzn.to/2Y5ODPk
Paint stripper (citrus-based) amzn.to/39QKgtG
My favorite primer amzn.to/2Y5Oyeu
Add some crusty texture amzn.to/3oiEgSM
Vallejo black wash amzn.to/39NdeL1
Using these Amazon affiliate links help support the channel at no extra cost to you.
You can also support the channel through PayPal donation:
www.paypal.me/BPCustomCreations
Story time with Toongrin
The M.A.K.O. (Mechanized Assault Killer Optimizer) is an ideal unit that takes the dangers of the deep to the land. This aquatic abomination can walk the earth crushing insurgence under foot and for further range combat utilizes a cannon that fires out grounded shrapnel at opposing forces. The M.A.K.O. is an ideal tool for military might.
Well that was fun.
Another youtuber I recommend for you is a fellow called Dr. Toys.
You may be able to pick up more tips n' tricks.
You are quite a delightful maker yourself, BP.
Hope to see you make more.
ua-cam.com/users/drtoyscustomtoys
Thanks ToonGrin! I'm already subbed to Dr. Toys and love seeing his builds 👍
Thanks for the story, I enjoyed it. I think Mako is a pretty good name especially as an acronym!
@@BPCustomCreations Thanks, I would wager future videos will have such antics. Your content is very fun. I am just getting into the hobby and I got to say there is a bit of intimidation going into it.
As a fellow viewer of thecraffsman I am sure he'd be proud of your one product challenge build, it's great to see the creativity you've managed
Thank you! It was fun to go outside my comfort zone of diecast cars on this one!
how have I never seen this? good job!
UA-cam is funny like that. Thank you for the inspiration 👍
I always love seeing builds where the creator is able to let his imagination run wild...like in this video. The end result is fantastic Ben!
Thanks, Jim! I appreciate you always following along :)
It reminds me of a critter from Tremors 3. Absolutely love it.
Thanks! I haven't seen that one but I'll look it up 👍
Reminds me of when I would make robots out of random stuff as a kid, looks like a lot of fun
Give it a go!
Great video my friend. Thanks for sharing with us. Just subscribed to your channel. Be safe, and God bless you and your family. 👊💯
Awesome! Thank you and same to you and yours! 👌😎👍
2 of them together will be cool in the bottle like turbine.
reminds me of something Robotnick from Sonic The Hedgehog would make
That's so true!
I would have made looòooooong legs (and a third one) from remaining plastic
To look it like a Martian machine from The War of the Worlds :)
Amazing angry little shark. Loved the video!
Haha there are endless options when building from raw materials!
Thank you! My angry shark is now chilling in my craft room.
As soon as l saw this l was thinking a kind of hover bike the shape of the body would be perfect 👌 👍
It's a really great shape!
An entertaining build. As for the name, how about "Sharky"? Got a definite cartilaginous fish look about the whole thing...
Thank you! Yeah, he does look pretty sharky 👍👍
Ok- this is cool! Im w Jay, think I'm gonna think of.what to do with a spray bottle! Very unique!
That would be awesome! I want to see what everyone does with the challenge😀
Hey, Ben! Total surprise to tune in today to find you working on this spray bottle challenge. I looked at all the pieces disassembled on your desk and wondered which direction you'd take this in. Good tip on heating the plastic before glue is applied. Great final result as a combo of your creativity and skill. It's an AquaBot! 🍁✌
Thanks for watching, Andrew! I hope you enjoyed it as a departure from what you might be used to 🙂 look for more variety in the future but definitely more diecast customs!
Fantastic build man, I love working with spray bottles myself. Very cool video can't wait to see more. 😎👍
Thanks, Andy! I'm glad you like him 😎
1 hell of an imagination you have there turned out sweet.
Haha thanks, Neil!
Nice 👍👊
Thanks Dane! Welcome to the channel 😁
The flame "polarize" the functional groups of the molecules, make them stand up so to speak. A cheap "cold plasma treatment". I got laughed at when I said it works :< You can also try to weld the plastic with a soldering iron. Works great. Strongest bond. 200°C and ffzzzzzzz.
Oh! Now I'm interested in this welding method. Is there a way to do it without destroying the parts surface?
@@BPCustomCreations Well you gotta be careful. Its like a 3mm score at the edge, but pretty clean. Check out Scifi Crafts. Best example.
@@BPCustomCreations While I haven't tried this method myself, I have seen it done on a few project videos. The trick is to use as low a temp as possible while still melting/softening the plastic.
Placing the soldering iron along the seam to be joined and heating up one edge just enough for the two pieces to form a steong bomd when cooled. I'd suggest you practice on sA@ome scraps first till you get the hang of it.
This technique can yield some amazing results once you become more comfortable with it. Good luck, thanks for sharing and keep on keeping on!!
Fishy
Wow!! Fantastic creativity!Enjoyed watching!!👍💕
Thank you so much!
Trying to play catch-up with my subs & finally got to this video. Dude...are you kidding me?! This thing is insane & you're ridiculous (in good ways 😆)!! Truly amazing the way you're creativity works and I'm happy to hear there will be other ways we'll be able to witness it. I especially love the sound effects & humor you're incorporating now lol. I can tell you're more comfortable making videos. Excellent video! PEW!😅
Oh and my name entry, if one hasn't been chosen yet, is Dudly.
Thank you! I keep getting ideas for other builds but the power of habit keeps sucking me back into making cars 😂 I still need to find out the best way for me to make videos but the sound effects seem popular and they are fun for me to think about sprinkling here and there
@@BPCustomCreations can't go wrong with cars! And I think your videos are just fine the way they are.
Simply amazing! I might join this challenge!
That would be cool! It's one of the most limited projects I've done to date. Spray bottle plastic is awful 😂
I saw the video you're talking about. It's called annealing when you heat the plastic to help it take paint. Very cool build. Love this challenge idea!
Give it a go if you have a cool bottle! I felt like it was a little bit too limiting for my liking but still fun to try.
I really wonder if there’s any plastic, metal trash which goes out of your place 🤩..I really enjoyed the outcome 👌🏼🤩
Don't tell my wife! 🤫
I really like your videos. Very relaxing. And your Very talented. This looks great I just come from your bus build
Thanks! I hope you enjoy my future builds too! I always have builds in progress 😊
Found your channel through the apocalyptic bus video and instantly subscribed. I looked at your sub count and couldn't believe my eyes! I'm sure now it's just a matter of time to get that number up where it belongs. Really like your stuff!!!!!
Awesome! Thanks for the kind words and I'm happy you've found the channel!
Awesome trash bash build man. Very cool fish sub thing. I love watching bill making stuff. I'm going to make something out of a spray bottle now. Congratulations on so many subscribers. Great video brother.
Thank you so much!! I can't wait to see what you make 😎
Dude!!! This is awesome! I may have to take on this challenge when I get some time. Great job, i say his name should be shark bait 😎👊
Shark bait hoo ha ha!
I hope you get a chance to try the challenge!
@@BPCustomCreations I'm gonna do it, just not sure when just yet
you could call it the bobber, (bottle, fish, plastic float sometimes called a bobber) the thing bobs through water and space, and worries about loosing its face.
Haha the last bit got me 🤣
Pieces manufactured together.... meet my friend, Dremel!
🤣 I thought about it but didn't want to ruin any textures with sloppy dremel work.
E-SPADON MK1.
Tis cool!
Thank you!
love the creativity! i should try a challenge like this i think it would help me build my creativity and kill my art block
Thank you! It's a good way to force yourself into making something!
For a name opinion.. war shark
He is Finneus, obviously
Haha I had thought of Finn but that's even better 😂
Star Fish
😂 That's a pretty good one!
Obviously Sharky McSharkface
Obviously 😂
Shark Speeder
That's a good one too!
Or ...86 gun fin
Finbot
Nice!
Spacey Kevin? Good name?
🤣🤣
💯💯🤜🤜🔥🔥🤛🤛👍👍🙏🙏💯💯💯💯
😎👍
@@BPCustomCreations 💯💯👍👍
Call him Mako
Hey nice! That's a good name 👍
I don’t think you need the foley work but great video otherwise!
Thanks! 😅 It's something I did a lot in my older videos and I haven't used sound effects much recently
James. His name is James.
🤣