How to install rear view reversing night vision camera. 2004 Honda Accord. Xtron

Поділитися
Вставка
  • Опубліковано 14 жов 2024
  • Installing a reverse camera on 2004 Honda Accord. Xtron camera for the Xtron tv/ Android touch screen.
    Removing tail light, Removing rear seat, Removing trunk liner, removing side panel.
    Camera- www.amazon.com...

КОМЕНТАРІ • 51

  • @Jez2008UK
    @Jez2008UK Рік тому +3

    A really useful video because whilst I have a different camera and requirement, you've shown me how to remove some of those interior trim panels :) So, thank you for that and well done!

  • @bazperkins
    @bazperkins 10 місяців тому

    Thanks for the video I am putting a dash cam with reverse camera in my wifes honda accord euro 2004 in Australia. What a nightmare running the cable from the rear to the dash. Thanks for your help mate.

  • @blouie0
    @blouie0 Рік тому +1

    Thanks for sharing. When I install the camera on my 2012 Accord, I had cut a slit in the license plate light fixture. Planning to install one in a 2007 Accord. Will check out if would be better to go through the taillight as you had done.

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  Рік тому

      Welcome. And Ofcourse what ever it’s easier with minimal damage to original car set up

  • @PeepTHISOut
    @PeepTHISOut 3 роки тому +4

    Fantastic video, my friend! I'm looking into the XTRONS model for my 2005 Honda Accord EX. Definitely gonna get the backup cam with it too. How could you not when it's only $25 or so and it'll give you the added security and convenience when you park?! Thanks for producing this! :-)

  • @ggtaruc2578
    @ggtaruc2578 3 роки тому +3

    Thaks for the video. Was it really necessary to remove the back seats if you were just going thru to the rocker covers anyway?

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  3 роки тому +4

      Hey thank you. The wire I tapped to it’s right there behind the back of the back seat. It’s not necessary to remove but it made the job easier if you chose to tap into another wire. I also needed to fix the lining of the carpet under the seat. So it was convenient for me.

  • @all_the_hype
    @all_the_hype 4 роки тому +3

    Nice video, much appreciated 👍🏼

  • @TopSpin361
    @TopSpin361 2 роки тому +3

    Roman Reigns over here in his backyard upgrading his ride.

  • @EduardoDiaz-v9d
    @EduardoDiaz-v9d 6 місяців тому

    Great video, thankfully for me I was swapping my brown ugly tan interior for a black leather/carbon fiber plastic combination so my interior can be destroyed or is removable at this point.. until I finish the interior fully new steering wheel and dash as well

  • @breezy1840
    @breezy1840 2 роки тому +2

    hey bro, wiring in my headunit and which cable did you put the orange one on ? i have the yellow plugged in but can’t seem to know where the orange goes to

  • @bobreichel
    @bobreichel Рік тому +2

    Was there anything you had to do in the android unit to get the camera to work? I've got power but the camera does not come on when I go into reverse.

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  Рік тому +1

      Im sure a wire plugs into the android and the other to the reverse light I went through the whole thing on my video.

  • @MrJoec68
    @MrJoec68 3 роки тому +2

    Excellent video

  • @christopherbeltran5020
    @christopherbeltran5020 2 роки тому +1

    hey brother I have the same unit as you what did you do with the wire that is labeled "reverse in" because when I put it in reverse the head unit doesn't seem to know its in reverse and doesn't change the source to display the back up camera. I have the wire that just says reverse and the red power positive wire connected together so it should be working but its not.

  • @LegalizeAsbestosMerica
    @LegalizeAsbestosMerica 11 місяців тому +1

    I spliced my wires now the back up lights won’t come on 😤 and yes positive with positive and negative with negative. I checked the fuse and it’s not burnt…

  • @LilBoi1da
    @LilBoi1da 4 роки тому +3

    Mine shows no input when it goes into reverse. Is there a setting that I have to change?

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  4 роки тому +1

      SoSo Beats did you make sure you plug your power to the light and the input to the reverse wire?

    • @LilBoi1da
      @LilBoi1da 4 роки тому +1

      @@Jaime.grijalva.official yes, everything is plugged in. The screen automatically goes to the reverse camera but just keeps saying no input.

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  4 роки тому +1

      SoSo Beats so basically it’s not getting power into the input wire. So change the source I ran a wire from the reverse lights to the input behind the radio.

    • @LilBoi1da
      @LilBoi1da 4 роки тому +1

      @@Jaime.grijalva.official so run a wire from the green backup light to the back of the radio to the wire that says backup?

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  4 роки тому +1

      SoSo Beats yes it should be back up input.

  • @heavensent5181
    @heavensent5181 Рік тому +1

    Can you change mine for me please

  • @TruthitInc
    @TruthitInc Рік тому +1

    He didn’t show where the wires go in the back of the radio. 🙄

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  11 місяців тому

      Ofcourse I did watch it again. Red wite goes with pink. Then the yellow plug in goes with camera in.

  • @ARSONXBELLA
    @ARSONXBELLA 6 місяців тому

    reverse lights?

  • @rcombs121
    @rcombs121 Рік тому +1

    My god, it's a wire, you didn't need to remove all that!

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  Рік тому

      😂🤣😂🤣 I was doing other things as well. Just showed people who may want to tuck it properly.

  • @shitsgigstv4058
    @shitsgigstv4058 3 роки тому +1

    What radio is that ?