This is cool and all, but this tells me nothing about how to make it work in an actual car. Now I know how the wires connect but how do I connect something from my headlight to the back of my radio? Do I have to drill wire holes or something?
@@MrGamelover23 1st off, every car differs so greatly, that if your are looking fora vehicle specific video, you need to search specifically for that vehicle. 2nd, don't connect the camera to the headlight, that will do you no good. I'd suggest connecting it to the reverse light in the tail light. 3rd, you haven't mentioned what vehicle this is being installed on whatsoever.
@@ProvoBeastAudio Uh, 2001 Ford Focus but this is purely hypothetical, so don't actually waste time answering it. Also I meant the reverse light instead of the headlight. But I figured that I can just have the cord go from underneath the dashboard to the back of the radio unit. I'm a long way off from being able to afford that kind of set up anyway, as soon as I get a paycheck I spend half of it on car repairs. I'll probably start small with something that doesn't actually have a screen just so I can get some basic Bluetooth functionality before eventually working my way up to a full-blown infotainment console with the screen and backup camera compatibility. But thank you for taking the time to reply anyway, sorry for wasting your time.
This has to be the BEST video on the internet showing CLEARLY how to hook up all wires. I’ve been researching 3 days and been so frustrated and about to just give up. Then I stumbled across the video and it’s so simple and I cannot thank you enough. Subbed and liked !!!
This Video was a lifesaver...I bought a car with Pioneer head unit and had to install reverse camera..I bought from amazon and was able to install the camera without any prior experience in my Nissan Altima 2013. Thanks a ton. Love this experience and consider this as my achievement in DYI
Out of all of the videos out there, this one changed my trajectory. No other video I found explains what the system needs to trip the camera and how the little red wires on the camera feed can be used for that. THANK YOU! I've been working on this thing off and on for three weeks. Your video got me across the finish line.
Haven't installed a stereo in over decade. Just got a screen with this back up cam. All new to this an this video was perfect at explaining. Bout to go give it a try wish me luck
I am installing cameras on my experimental amphibious airplane, N71RJ, to monitor critical functions like wheel positions. This video has been more helpful than a dozen others in understanding the wiring scheme - and all done in less than 11 minutes. Thank you!
I watched several youtube videos on how to install a backup camera and this one is the best. It took me about 4.5 hours to install a camera and a new head unit into my 2007 Toyota Tundra. Much of the time was spent running the wire from the back to the front. I had to drill a hole in the cab and fish the wire through to the head unit. It was a pain but I am happy with the results.
This is arguably the best explanation I have seen on UA-cam. I have been researching for almost a week now and this video just solved all my problems. Thank you guys for this amazing content
Thank you so much, we've been struggling for like 5 hours trying to figure out how it works, tutorial after tutorial. Next day, we found this. We did it in 15 minutes, I am saying it again, thank you for making this tutorial.
A professional audio company made a UA-cam video where they added a wire from the taillight to the radio reverse trigger, at that moment I realized they didn’t know what they were doing. Thank you for clarifying, it makes sense!
You've earned a sub! Normally, I don't view alot of these videos, but in this case I needed to and like everyone said, THIS IS THE BEST EXPLANATION on wiring properly.
I've looked at tons of these back up camera videos where the purple are actually doing all of the work. But this, without all of the other footage was 100% more informative.. clear and concise.. bravo sir!
Very helpful for me. I would’ve never understood that the red wire runs alongside the yellow RCA wire. My whole hang up was trying to find where to hook up the red wire coming off of the radio to get reverse power. You explained it so clearly. Thanks. I connected the other end to my reverse light👍
same here bro... the camera instructions that came with mine left that part out... had to figure it out on my own...im sure without understanding this connection, many people would assume the camera was defective... helpful vid!
Im confused...i understand to splice the red wire that's close to the camera in the trunk to the reverse light....but I dont know what to do with the red wire up at the radio....there's nothing for me to splice that to
THANK GOD I found this video! The directions with my camera are bad. uTube videos just hook stuff up and don'texplain things very well. Now I know what the little red pig tail wires are for! I bought my stereo and camera from Crutchfield and tech support did not even know how to hook up the wires. It all makes sense now. Thank you!!!
I already knew how to wire up a back up cam as I have plenty of experience with wiring, but I have never installed a back up cam and this video helped me confirm my thoughts on the installation process before I do it myself. Great video.
I did not expect to find a video that explained in such an effective and simple way. so much so I feel 100% confident in doing the job when I was 15% before.
Thank you for breaking it down and making it simple. I have a small trailer and wanted to keep an eye on it while traveling this summer. Everyone out there is trying to keep this "Secret Squirrel" and it's frustrating. I have a great camera in my 2016 Nissan Sentra, and wanted to use it and now I can! Thanks again, YOU ROCK!
Holy crap... I've been looking into hooking up my backup camera and was loosing confidence in doing it myself. This is by far the best and simplest explanation. Thank you!
I did everything like this video did, however my 04 Lexus is300 back up light has both positive wires instead positive and negative, should I run my own ground wire from the head unit down to the camera ground wire?
My head unit gives me the option to look at the camera image anytime I want I’m driving down the freeway I can turn it on. And the way to do that is to take the red wire in the black wire just hook the black one to the Jessica car and then find any hot water in your car you could even go to your license plate light but you’d have to turn your running lights on to turn the camera on. Or even just connected to your cigarette lighter where it’s always hot then you can look at the image anytime you want. And it will still come on when you go in reverse
Provo Beast Audio Installation I have a wireless camera but I am not able to connect them. Can you help me please? Camera have 2 wires yellow and red these fit the wireless transformer. Monitor have 3 wires yellow, white and red while the wireless transformer have only yellow.
It's true, I kept seeing others trying to tie the Reverse line off the Stereo in parrallel with the B+ and ACC wires off the harness I was like wtf.. I don't want my camera on the screen 24/7 This video is better than most
I cant thank you enough for telling me about that extra red wire hanging off the video cable.. now I dont have to find the reverse light under the dash! You are the man!
This is the best video explaining the backup camera wiring !!!! Power wiring is clearly explained with fine details, no other video did that. Thank you.
This is a great easy to understand video. Don't forget that some cameras use 6 volts instead of 12 so you will have to get some kind of converter to go from the backup light to the camera, the converter usually has three wires, a ground, a 12-volt positive in and a 6-volt volt positive out that connects to the camera.
Very good! I have one set up when put in reverse it interferes with my AM radio so heads up if you wire for always on, it may bother your radios AM recepthion.
Brilliant video, so well explained with useful examples. The bench demo is so much more useful than on a car as it clearly shows the connection requirements.
You can also use switch as a trigger for the video signal provided with 12volts source and 1.5 amp or 3 amp to be safe. This way, you can use the camera as a monitor and not only for reversing the car.
@@Jeff_Moreland yeah. It turns on the camera. The LED’s will have constant power to them unless you run that trigger wire all the way back up front to were the trigger for the camera is done. I tried it every way possible.
Thank you, thank you, thank you. FINALLY an explanation that SIMPLY explains what all included wires connect to. No modifications or alternative ways to get it done, just what everything is for and where it goes.
Thanks for this video. I am installing one in my truck and knowing that little wire goes directly to my reverse wire is going to save me untold amounts of time!!! Thanks again!!!
Very clear and precise demonstration of the wiring. Many thanks to the presenter. These other videos demonstrating the process, the presenters reach somewhere, hide some content and leave somebody in the dark.
I've seen hundreds of videos about reverse camera installation and this is the one explaining clearly all connection and cables. Now, I'm able to figure out that in my particular case, I do not need the red cable connection to the radio since my radio is able to switch to reverse mode once I change the gear to do that. Thank you!
I figured out to remove the clips from my car myself but this video was on point and accurate and super easy to follow. Thank you so much for saving me the headache and money to do this myself. 💪🏽💪🏽💪🏽
I got my rear view camera in today and needed to know how to install and did a search and this is the first video that popped up and this video gave a clear view on how to. Thanks a million. Also i will subscribe to this channel
I watched this video before fitting my rear view camera. I followed all the steps as per this video and the camera would only work when the cars ignition was on but car not running, start the car and the camera would switch off. What I found out after alot more searching on the Internet was if your car happens to have can bus electronics you have to energise the camera not from the back up lights but through a relay so you need a 12volt feed from the car battery to the relay, a ground to the relay, a wire from the backup lights to switch the relay and lastly wires from relay to the camera and the trigger wire. This video does not explain this so yes what is shown but not correct for all cars.
I just read you comment. Icannot get it to work. If the engine is off, the camera picture is perfect. Once the engine is running, the picture is completely distorted. Could it be the same thing? I have canbis as well, and power through the back light. I am not technical at all, so relays and stuff...i don't know.. Do you have any more info?
Exceptional instructional video. Well done. I bought an aftermarket (OEM comparable Rosen head unit) for my 2009 Corolla and need to wire a backup camera. Thank you!
This video is wrong, please do not follow these instructions if your car radio has a Canbus. I followed these instructions for method 1 and while the camera worked I ended up with multiple errors on my car's ECU from multiple modules. You do not connect the red wire from the video cable to the rear light positive source or to the rear of the radio, if your radio comes with a Canbus module. The canbus will operate the camera when power is applied via the rear light bulb. The instructions given in this video only apply to car radio that do not have a canbus.
Very useful video.Fitted a JMCQ For Toyota Avensis T250 2 II 2003 - 2009 Car Radio Multimedia Video Player Navigation 4G GPS Android 11 Carplay 2 Din today. Bought from Ali Express the T10-A-Camera model for £93! Fitted well with a slight trim of the Toyota console. Came with virtually identical camera. Great explanation of two different powering methods. I will be powering the camera from a 12v ignition based outlet in the boot, and using the reversing light 12v hot to tell the unit to display the camera. Great job Mr Provo Beast!
Thank you for this video! You freaking rule! Great tutorial. You've actually given me the confidence to do this so I did it today on my wife's 2001 CR-V 5spd. Hardest part was t-taping. My t-taps weren't able to get through the wire housings even with using the pliers to squeeze them down so when I fired it up nothing worked initially. So I removed the taps and used my wire stripper to reveal some copper then retapped. It was good after that. Only other issue was the wire from these cheap Chinese kits are such small gauge wire. Wish they were a little thicker gauge. I had a hard time crimping the power wire spade. It kept coming apart because of the small gauge wire. So I stripped more wire and doubled it over to make it thicker then recrimped and it held. My car battery also died while doing this so thought the radio was broken or a fuse popped because it wouldn't turn on. So I checked all connections. Removed the harness to make sure the crimps were holding. Then I noticed the lights on the dash were fading. I tried to start the car and nothing. I had to jump it. Then everything worked. Power hungry accessories. But thanks again. Your tutorial was super clear.
Hi, a bit confused. The 8:35 method would allow the camera to turn on when you reverse but also have the option to turn on while driving normally? Or just when driving normally?
Parts linked in the description!
This is cool and all, but this tells me nothing about how to make it work in an actual car. Now I know how the wires connect but how do I connect something from my headlight to the back of my radio? Do I have to drill wire holes or something?
@@MrGamelover23 1st off, every car differs so greatly, that if your are looking fora vehicle specific video, you need to search specifically for that vehicle. 2nd, don't connect the camera to the headlight, that will do you no good. I'd suggest connecting it to the reverse light in the tail light. 3rd, you haven't mentioned what vehicle this is being installed on whatsoever.
@@ProvoBeastAudio Uh, 2001 Ford Focus but this is purely hypothetical, so don't actually waste time answering it. Also I meant the reverse light instead of the headlight. But I figured that I can just have the cord go from underneath the dashboard to the back of the radio unit. I'm a long way off from being able to afford that kind of set up anyway, as soon as I get a paycheck I spend half of it on car repairs. I'll probably start small with something that doesn't actually have a screen just so I can get some basic Bluetooth functionality before eventually working my way up to a full-blown infotainment console with the screen and backup camera compatibility. But thank you for taking the time to reply anyway, sorry for wasting your time.
@@MrGamelover23 Bruh he literally explained it lmao
@@MrGamelover23 !aa
This has to be the BEST video on the internet showing CLEARLY how to hook up all wires. I’ve been researching 3 days and been so frustrated and about to just give up. Then I stumbled across the video and it’s so simple and I cannot thank you enough. Subbed and liked !!!
Thanks! Subscribe for more great content!
Same here Paul! Glad I found this video.
Yea the aftermarket back up camera that I got did not have enough instructions, and the info that it had was just weird and confusing
@@Yoooshtivethis confusion is what keeps a roof over my head.
This Video was a lifesaver...I bought a car with Pioneer head unit and had to install reverse camera..I bought from amazon and was able to install the camera without any prior experience in my Nissan Altima 2013. Thanks a ton. Love this experience and consider this as my achievement in DYI
I've looked at a hundred of these back up camera videos and this is the only one that makes the wiring clear-thank you!
exactly what I want to say!
carsanbo
Totally agree. Best video on the topic. Subscribed.
IKR? I’m pretty sure that’s my exact stereo if it’s the eXcelon unit! Right on
Totally agree
THREE MILLION views and counting, again! Again, thanks for the continued support and don't forget to Subscribe!
Out of all of the videos out there, this one changed my trajectory. No other video I found explains what the system needs to trip the camera and how the little red wires on the camera feed can be used for that. THANK YOU! I've been working on this thing off and on for three weeks. Your video got me across the finish line.
Me, too! I thought I had my wiring planned out, until I watched this video. 👍 👍
Haven't installed a stereo in over decade. Just got a screen with this back up cam. All new to this an this video was perfect at explaining. Bout to go give it a try wish me luck
I am installing cameras on my experimental amphibious airplane, N71RJ, to monitor critical functions like wheel positions. This video has been more helpful than a dozen others in understanding the wiring scheme - and all done in less than 11 minutes. Thank you!
I watched several youtube videos on how to install a backup camera and this one is the best. It took me about 4.5 hours to install a camera and a new head unit into my 2007 Toyota Tundra. Much of the time was spent running the wire from the back to the front. I had to drill a hole in the cab and fish the wire through to the head unit. It was a pain but I am happy with the results.
Buy this man a steak dinner with a lap dance on family night😂
Lol hmmm🤔
This is arguably the best explanation I have seen on UA-cam. I have been researching for almost a week now and this video just solved all my problems. Thank you guys for this amazing content
Finally. This is the most simplified and dumbed-down video on UA-cam. YOU CAN'T SCREW IT UP. Just follow this guy's step by step process.
I did everything he said and I got no where. 3 hours of my life I’ll never get back and “DuAl TeCh” is a cheap ass brand.
Just went thru 10 of these vids.., yours was the one that finally helped makes sense of it all. Great visual lesson. Thank you!
Thanks! Subscribe for more great content!
Thanks for this guys! I’ve installed an aftermarket stereo (cheap one) and the instructions were pretty much useless when it came to installing this.
Thank you so much, we've been struggling for like 5 hours trying to figure out how it works, tutorial after tutorial. Next day, we found this. We did it in 15 minutes, I am saying it again, thank you for making this tutorial.
I know the feeling.
A professional audio company made a UA-cam video where they added a wire from the taillight to the radio reverse trigger, at that moment I realized they didn’t know what they were doing. Thank you for clarifying, it makes sense!
You've earned a sub! Normally, I don't view alot of these videos, but in this case I needed to and like everyone said, THIS IS THE BEST EXPLANATION on wiring properly.
I've looked at tons of these back up camera videos where the purple are actually doing all of the work. But this, without all of the other footage was 100% more informative.. clear and concise.. bravo sir!
Very helpful for me. I would’ve never understood that the red wire runs alongside the yellow RCA wire. My whole hang up was trying to find where to hook up the red wire coming off of the radio to get reverse power. You explained it so clearly. Thanks. I connected the other end to my reverse light👍
same here bro... the camera instructions that came with mine left that part out... had to figure it out on my own...im sure without understanding this connection, many people would assume the camera was defective... helpful vid!
Im confused...i understand to splice the red wire that's close to the camera in the trunk to the reverse light....but I dont know what to do with the red wire up at the radio....there's nothing for me to splice that to
Years ago your UA-cam videos helped me install my radio. And bought stuff from your website now I’m back to buy more. Thanks
Watching this made me feel so much more confident to tackle my camera install. Thanks a million!
Thanks! Subscribe for more great content!
THANK GOD I found this video! The directions with my camera are bad. uTube videos just hook stuff up and don'texplain things very well. Now I know what the little red pig tail wires are for! I bought my stereo and camera from Crutchfield and tech support did not even know how to hook up the wires. It all makes sense now. Thank you!!!
I already knew how to wire up a back up cam as I have plenty of experience with wiring, but I have never installed a back up cam and this video helped me confirm my thoughts on the installation process before I do it myself. Great video.
I typically don't subscribe on how to videos, but this guy deserves it. Thank you so much!
Thank you so much for this video. Made installing this camera so easy. You clearly explain how to do it in laymen’s terms. Can’t thank you enough.
I did not expect to find a video that explained in such an effective and simple way. so much so I feel 100% confident in doing the job when I was 15% before.
Hey thanks for this video, really helped me out a lot, the instructions that came with my backup camera were practically nonexistent.
After viewing too many installation videos, finding yours ended my search. Very clear and easy to understand. Even for an old female!
Thank you for breaking it down and making it simple. I have a small trailer and wanted to keep an eye on it while traveling this summer. Everyone out there is trying to keep this "Secret Squirrel" and it's frustrating. I have a great camera in my 2016 Nissan Sentra, and wanted to use it and now I can! Thanks again, YOU ROCK!
Holy crap... I've been looking into hooking up my backup camera and was loosing confidence in doing it myself. This is by far the best and simplest explanation. Thank you!
Support the channel by picking up your Provo Beast merch here: teespring.com/stores/provo-beast-audio-installation
Provo Beast Audio Installation great description really gave me good insight, now figuring out running wired became the issue lol.
Too many videos make this look too technical. Very well explained!
Can I attach this to a PC monitor?
I guess you could if the PC monitor accepts a Composite Video input.
I did everything like this video did, however my 04 Lexus is300 back up light has both positive wires instead positive and negative, should I run my own ground wire from the head unit down to the camera ground wire?
I had no idea what to do I’ve watched multiple videos and had no luck, until i watched this one 10/10 would recommend this video
Two Million Views and counting, thanks for the continued support! Don't forget to subscribe :)
My head unit gives me the option to look at the camera image anytime I want I’m driving down the freeway I can turn it on. And the way to do that is to take the red wire in the black wire just hook the black one to the Jessica car and then find any hot water in your car you could even go to your license plate light but you’d have to turn your running lights on to turn the camera on. Or even just connected to your cigarette lighter where it’s always hot then you can look at the image anytime you want. And it will still come on when you go in reverse
Wow talk to text really messed up my comment shit!
It was supposed to say black wire to the chassis, not Jessica. Lol
Holy shit another one, hot wire, no water. Damn!
Rite simply explained for even if you just want constant power for your camera when you manually switch Great Video Dude👍😎
I’ve watched so many videos of these installs and haven’t figured out how to do the backup camera, thank you so much for actually going into detail!
The most clear how to video on this topic! Thumbs up!!
Subscribe!
carsanbo
Provo Beast Audio Installation
I have a wireless camera but I am not able to connect them.
Can you help me please?
Camera have 2 wires yellow and red these fit the wireless transformer.
Monitor have 3 wires yellow, white and red while the wireless transformer have only yellow.
It's true, I kept seeing others trying to tie the Reverse line off the Stereo in parrallel with the B+ and ACC wires off the harness I was like wtf.. I don't want my camera on the screen 24/7
This video is better than most
I cant thank you enough for telling me about that extra red wire hanging off the video cable.. now I dont have to find the reverse light under the dash! You are the man!
Perfect teacher you explain everything perfectly 🎉❤ much love
This is the best video explaining the backup camera wiring !!!! Power wiring is clearly explained with fine details, no other video did that. Thank you.
This is a great easy to understand video. Don't forget that some cameras use 6 volts instead of 12 so you will have to get some kind of converter to go from the backup light to the camera, the converter usually has three wires, a ground, a 12-volt positive in and a 6-volt volt positive out that connects to the camera.
after the rabbit hole of reverse camera videos i found this kudos to you my friend you are a true teacher..please keep making videos
This was the best explanation of a backup camera install I've seen so far. Thank you for really breaking it down!
Thanks! Subscribe for more great content!
Very good! I have one set up when put in reverse it interferes with my AM radio so heads up if you wire for always on, it may bother your radios AM recepthion.
Brilliant video, so well explained with useful examples.
The bench demo is so much more useful than on a car as it clearly shows the connection requirements.
Of all the reverse camera install videos on this channel, yours is the best ! Thank you for your help
I watched houndrends videos for wiring backup camera but this one is the best. Thank you 🙌🏼
Subscribe!
they way you speak in this makes me feel very safe and un-intimidated by all those angry wires... thank you sir!
This was the best explanation video for installing back up cam,, Thank you 2019
spent 2 days looking for answers as to why my cam wasnt working when it was on the old head unit
And your video just showed my why
You can also use switch as a trigger for the video signal provided with 12volts source and 1.5 amp or 3 amp to be safe. This way, you can use the camera as a monitor and not only for reversing the car.
But that would burn the LED’s on the camera all of the time ,right ?
@@Chon-c no because the trigger wire turns it on
@@Jeff_Moreland yeah. It turns on the camera. The LED’s will have constant power to them unless you run that trigger wire all the way back up front to were the trigger for the camera is done. I tried it every way possible.
@@Jeff_Moreland The radio can only show /turn on the camera. It cant be used as a power shut off for the LED’s on the camera .
@@Chon-c wrong leds come on when the camera comes on
I watch four or five of these videos and yours was the clearest to the point and spot on information I needed to hook up a reverse camera.
Thank you
Best backup video on UA-cam!!! Thanks
You are the greatest I’ve searched high and low for a proper tutorial good work
You did the best tutorial for fitting a reverse cam M8 . I have seen plenty and none were helpful this one is very very detailed. A+++ thank you 👌👍👍
Subscribe!
Thank you, thank you, thank you. FINALLY an explanation that SIMPLY explains what all included wires connect to. No modifications or alternative ways to get it done, just what everything is for and where it goes.
You are the best, very well explained greetings from Perú. Thank you.
2025 and still the best description on how to install a backup camera.
Oh man you saved me a looot of headache
Thanks 👌☝👍👍👍👍👍
Thanks for this video. I am installing one in my truck and knowing that little wire goes directly to my reverse wire is going to save me untold amounts of time!!! Thanks again!!!
Finally. A video that explains it well. Thank you, sir.
Very clear and precise demonstration of the wiring. Many thanks to the presenter.
These other videos demonstrating the process, the presenters reach somewhere, hide some content and leave somebody in the dark.
Glad it helped
Ur the best,, i finally got it 😂
Subscribe!
carsanbo
Thanks!
Hey thank you!
Thank you! Your video is very easy to understand and helpful 👍🏼
I've seen hundreds of videos about reverse camera installation and this is the one explaining clearly all connection and cables. Now, I'm able to figure out that in my particular case, I do not need the red cable connection to the radio since my radio is able to switch to reverse mode once I change the gear to do that. Thank you!
This is a great Video. Explained everything I needed to know when hooking up my camera to my radio . thanks
Not just what I have but the basics does give me a better understanding than the limited instructions that came with.
The intro reminds me of This Old House 0:19
I figured out to remove the clips from my car myself but this video was on point and accurate and super easy to follow. Thank you so much for saving me the headache and money to do this myself. 💪🏽💪🏽💪🏽
First I thought he’s gonna say “hey guys Chris....
Fixed
Best back up camera video on you tube!
This was a really great video. Thank you. Very clear and simple on the how to of backup camera wiring.
This is by far the best video I have seen describing what to do. Very clear instructions, good pacing, great examples. Thank you so much for this
Thank you. I'm having troubles installing my backup camera. You have made it clear as to how to install it. I'll try your way. I subscribed
carsanbo
Awesome video thank you so much
Absolutely the best video on the net regarding backup cams, extremely well presented with nothing left out, thank you !!
Exactly what I needed. Thank you!
Yep, this was the only video that explained the use of the red wire for video switching on the radio. Thank you so much!
Best video!
Subscribe!
Done! Thanks for that great video. It totally helped me out in connecting my multimedia with the rear view camera :)
I got my rear view camera in today and needed to know how to install and did a search and this is the first video that popped up and this video gave a clear view on how to. Thanks a million. Also i will subscribe to this channel
I watched this video before fitting my rear view camera. I followed all the steps as per this video and the camera would only work when the cars ignition was on but car not running, start the car and the camera would switch off. What I found out after alot more searching on the Internet was if your car happens to have can bus electronics you have to energise the camera not from the back up lights but through a relay so you need a 12volt feed from the car battery to the relay, a ground to the relay, a wire from the backup lights to switch the relay and lastly wires from relay to the camera and the trigger wire. This video does not explain this so yes what is shown but not correct for all cars.
I just read you comment. Icannot get it to work. If the engine is off, the camera picture is perfect. Once the engine is running, the picture is completely distorted. Could it be the same thing? I have canbis as well, and power through the back light. I am not technical at all, so relays and stuff...i don't know.. Do you have any more info?
I've seen tons of similar video but finally you're one explained clearly how and why. Thank you so much Sir
Exceptional instructional video. Well done. I bought an aftermarket (OEM comparable Rosen head unit) for my 2009 Corolla and need to wire a backup camera. Thank you!
Did you get to do the backup camera ? Did it connect to the Rosen head unit?
You are the best if it weren’t for you I would of never connected the camera
Subscribe!
Bryan Martinez b. Vbbbb bbbb bbbb
L
Finally I find a video that makes sense
This video is wrong, please do not follow these instructions if your car radio has a Canbus. I followed these instructions for method 1 and while the camera worked I ended up with multiple errors on my car's ECU from multiple modules. You do not connect the red wire from the video cable to the rear light positive source or to the rear of the radio, if your radio comes with a Canbus module. The canbus will operate the camera when power is applied via the rear light bulb. The instructions given in this video only apply to car radio that do not have a canbus.
Can you pls help me I’m stuck! Everything works but the camera. I have canbus installed
Do I still need to connect a ground to the camera power cord ?
THANK YOU SO MUCH !!!!!!
3yrs later your comment still confuses. WTF is a canbus, what does one look like etc. lol … while well intentioned, fairly useless
The videos not wrong your just stupid 😅
Glad to have came across this video now I can finish hooking up my back up camera on my boss radio, only video I’ve seen with proper explanation
This is so clear and understandable 😊
Very useful video.Fitted a JMCQ For Toyota Avensis T250 2 II 2003 - 2009 Car Radio Multimedia Video Player Navigation 4G GPS Android 11 Carplay 2 Din today.
Bought from Ali Express the T10-A-Camera model for £93! Fitted well with a slight trim of the Toyota console.
Came with virtually identical camera. Great explanation of two different powering methods. I will be powering the camera from a 12v ignition based outlet in the boot, and using the reversing light 12v hot to tell the unit to display the camera. Great job Mr Provo Beast!
Explained brilliantly ! any one should be able to follow this 👍👍.. got a camera with NO instructions and this has sorted me out ..
Thank you for a detailed video now I can wire my camera. This is the best video yet on how to wire a backup camera.
My biggest concern was which red went to which or if they were to be twisted together… the diagrams don’t specify. Thank you for your clarification!
You’re absolutely top notch at explaining this. No body better
Thank you for this video! You freaking rule! Great tutorial. You've actually given me the confidence to do this so I did it today on my wife's 2001 CR-V 5spd. Hardest part was t-taping. My t-taps weren't able to get through the wire housings even with using the pliers to squeeze them down so when I fired it up nothing worked initially. So I removed the taps and used my wire stripper to reveal some copper then retapped. It was good after that. Only other issue was the wire from these cheap Chinese kits are such small gauge wire. Wish they were a little thicker gauge. I had a hard time crimping the power wire spade. It kept coming apart because of the small gauge wire. So I stripped more wire and doubled it over to make it thicker then recrimped and it held. My car battery also died while doing this so thought the radio was broken or a fuse popped because it wouldn't turn on. So I checked all connections. Removed the harness to make sure the crimps were holding. Then I noticed the lights on the dash were fading. I tried to start the car and nothing. I had to jump it. Then everything worked. Power hungry accessories. But thanks again. Your tutorial was super clear.
Nice and simple and not a ton of unnecessary babbling.😊
That was the best back up camera explanation of all the videos I've watched, thanks.
This video is definitely will help me once I get my backup camera when it shows up on the mail. Very well explained. Thank you for this video
Best tutorial about back up camera in youtube
But if you have it hooked up the second way, doesn’t that mean you have to manually switch to the camera setting when backing up?
Hi, a bit confused. The 8:35 method would allow the camera to turn on when you reverse but also have the option to turn on while driving normally? Or just when driving normally?
Very clearly shows all wiring connections. Best I have found in three days of looking. Many thanks.
@Provo Beast Audio Installation what’s the where you buy the touchscreen and what’s the name of it
Thanks so much for uploading this informative clip, this was the best video describing the installation of a reverse camera I could find on UA-cam.