REVIEWED: Milwaukee FORCE LOGIC KNOCKOUT HOLE 🕳 PUNCH TOOL

Поділитися
Вставка
  • Опубліковано 8 сер 2024
  • The Milwaukee M18 Knockout tool was designed with the single purpose to punch holes in electrical equipment.
    Join us as we test it out on some steel trunking and a stainless steel enclosure.
    =====================================
    00:00 Milwaukee Force Logic hole punch review
    01:19 What do you get in the box?
    02:11 Punch and die sets supplied with the kit
    02:30 Setting up the Force Logic hole punch
    03:18 Drilling a pilot hole
    03:56 Cutting a 25 mm hole in a trunking
    04:49 Set up for punching larger holes
    05:51 The results
    06:22 Enlarging an existing hole
    07:36 Reducing the depth of the machine
    08:37 Punching stainless steel
    =====================================
    Featured in this video
    MILWAUKEE M18HKP-201CA M18 FORCE LOGIC HYDRAULIC KNOCKOUT PUNCH
    We purchased our from Big Red Powertools (deep breath for the price)
    👉 hub.efixx.co.uk/MW-force-logic
    =====================================
    More electricians tool reviews here
    👉 www.efixx.co.uk/tools
    =====================================
    #efixx #electricians
  • Наука та технологія

КОМЕНТАРІ • 78

  • @efixx
    @efixx  3 роки тому +4

    We know what you are thinking a hole saw or step cutter is better - see what happened next 👉 ua-cam.com/video/7rrn1A9Hv1k/v-deo.html

  • @dvrn86
    @dvrn86 2 роки тому

    First used the ratchet type working in Canada and loved it. This tool would save some time on trunking and board work

  • @ukpm
    @ukpm 3 роки тому +1

    Great video. I've always been an advocate of large, smooth holes.

    • @efixx
      @efixx  3 роки тому +1

      😝

  • @brianwood5220
    @brianwood5220 3 роки тому +2

    Excellent tool guys, thanks for sharing.

    • @efixx
      @efixx  3 роки тому

      Thanks for commenting 👍🏻

  • @johnschroeder3072
    @johnschroeder3072 3 роки тому +5

    When I've used hydraulic punches I use the 20mm punch to create the hole for the larger shank required for the larger punches removing the need for a cone step drill or hole saw which is particularly important on stainless. This mean you only need to drill a 12mm hole for even the biggest of punches where drill bits like Sutton's Inox drill bits would speed up the process nicely.

    • @efixx
      @efixx  3 роки тому

      All great points so thanks for commenting 👍🏻

    • @Trill_Sparky
      @Trill_Sparky 2 роки тому

      It
      Yeah

  • @abdullahseba4375
    @abdullahseba4375 3 роки тому +6

    A great tool, but a bit too pricey for me. I make do with Q-Max punches and an impact driver.
    Milwaukee do a similar looking tool for stripping large cables. It would be interesting to know if they work on cables here.

  • @michealplater9007
    @michealplater9007 3 роки тому +4

    I have one at work, great for cutting stainless steel and aluminium

  • @elsdonsparks
    @elsdonsparks 3 роки тому +3

    I had a set of "hole punch" dies ( Called I think Crookes Cutters?), drilled a 10mm hole, and used an Allen key adaptor on my battery drill to wind them through the metal, nice clean hole, no filing afterwards.

    • @efixx
      @efixx  3 роки тому

      We used to use them - we’ll try to find an equivalent to review.

    • @12000gp
      @12000gp 3 роки тому +1

      Q max were the ones I always used, just brand names though I suppose

  • @vw_beachbuggybrookster
    @vw_beachbuggybrookster 3 роки тому +2

    great bit of kit 👍👍👍

    • @efixx
      @efixx  3 роки тому

      Might try making a few more holes 🕳 in the brookie burner.

  • @nocode1603
    @nocode1603 3 роки тому +1

    Yeah a bit rich for me i was taught with the good old tried n trusted hole saw.. & a file im so up for new ways of making the sparkie life easier loving your work guys every video is like a day on the job aka a school day....👏👍

  • @gbelectricks
    @gbelectricks 3 роки тому +3

    I used something similar to that 20 years ago, it was a hydraulic version with a side pump arm. Brilliant bit of kit for panel work, but to warrant buying one you need to be working on panels or on on industrial installations all the time 💰👍

    • @efixx
      @efixx  3 роки тому +2

      Lucky you with the hydraulic version - we had the one which used Allen keys!

    • @gbelectricks
      @gbelectricks 3 роки тому +1

      @@efixx WHAT!!! That must have been a nightmare to use!!🥵🤣

    • @efixx
      @efixx  3 роки тому +3

      Paid by the hour

  • @David-dz8jb
    @David-dz8jb 3 роки тому +3

    Always found the Q max punches great for enlarging a existing 20mm hole in enclosures / trunking into a 25mm or more. Yes they were handraulic with a extended allen key. I'm retired now but still have them in my tool box...you never know?

    • @efixx
      @efixx  3 роки тому

      Handraulic - we’ll use that 😂😂

    • @Gdpud
      @Gdpud Рік тому

      And Q-max punches are square/rectangle & even D-shaped punches!

  • @UberAlphaSirus
    @UberAlphaSirus 3 роки тому +1

    That's a nice niche tool. I wish they done step/cone/xmas tree drills in odd mm sizes too.

  • @matthewcollis-long5233
    @matthewcollis-long5233 Рік тому

    Great tool if you’ve got to create many precise holes in steel or stainless. On the rare occasions we have to do this sort of thing it’d be invaluable, but none of us like having expansive tools not out there earning their keep. I haven’t seen the price but I’m sure it’s not for the faint-hearted!! As far as the Milwonky goes - I have the 125mm cordless bandsaw (which I think is what you’re referring to) and it definitely takes a bit of practice to get it spot on but once you’re used to it it is magic. Wouldn’t use a disc cutter now unless I absolutely had to.

  • @eddie_pegasus_electrical
    @eddie_pegasus_electrical 3 роки тому +1

    Must say when I had a little play with it when last up, got to say nice piece of kit for commercial / industrial sparks. The only issue I found was there was no 38mm punch. Yes a 40mm punch, but with today's 38mm bushes the hole was to big IMHO. Great review guys, see you soon !!

    • @efixx
      @efixx  3 роки тому

      Thanks Eddie

  • @angelarolski1554
    @angelarolski1554 3 роки тому +1

    This will be great when drilling a hole for a new supply cable in trunking with already present live cable for other flat. Always been anxious and supercarefull not hit the live ones with the holesaw.

  • @ElectricianTV
    @ElectricianTV 3 роки тому +1

    Great video thank you . Does the slug and trunking get hot from the press tool. A little disappointed that it doesn't come with the 2 inch press as standard but comes with 16mm.Out of interest why have they including a 16mm. I can't think of a job were you would use 16mm.

    • @efixx
      @efixx  3 роки тому

      No heat in the punching process. They haven’t included the 50mm because they sell it for £60 - 16mm will rust away in the box 📦

    • @kenbrown2808
      @kenbrown2808 3 роки тому +1

      the American kit comes with punches for 1/2" to 2" in conduit size increments. for a bit extra, I also got a cutter for 3" conduit. (note the punches are sized in conduit size, not in actual dimension so, for example, the 2" die is actually 2.5"

  • @joetyson6223
    @joetyson6223 2 роки тому

    Hi,
    Would this tool sort that thin metal stud. To run pipe work.

  • @davey6024
    @davey6024 3 роки тому +15

    Should of kept going with the cone cutter, job done 🤣

    • @cypeman8037
      @cypeman8037 3 роки тому +3

      It certainly would have been quicker, it was a lot of faff wasn’t it?
      But if you’re doing hundreds .

  • @filipe.skunk8
    @filipe.skunk8 3 роки тому +2

    Punch cutter is better than any hole saw or cone drill any day.. it’s the only one able do make a clean cut. that one is good if you spend your days doing holes otherwise the manual ones do the job and are cheap if you have to punch a few every now and then. And to be fair I probably wouldn’t bother with that whole process till it goes above 25mm or it’s stainless.. The hole saw from that kit cutting the stainless will probably go in the bin after.

  • @alecturner2008
    @alecturner2008 3 роки тому +1

    I did a lot of work in one car factory and they classed using hole saws as hot work. We had the old punches which can be hard work.

    • @efixx
      @efixx  3 роки тому +1

      Interesting that they classed hole saws as hot work 👍

    • @alecturner2008
      @alecturner2008 3 роки тому

      It may have been a precaution against a previous accident.

  • @crum167
    @crum167 2 роки тому +1

    Nice video. The Australian one we use at work goes up to 63mm

    • @efixx
      @efixx  2 роки тому

      Cheers 🍻

  • @kenbrown2808
    @kenbrown2808 3 роки тому

    not only does the US kit have more punches for less money, our ball adaptor is an interrupted thread connection, so if you're doing a bunch of the same size hole, you just pop the adaptor off with a one third turn to clear the slugs.

  • @paulmerchant9015
    @paulmerchant9015 3 роки тому +1

    makes sense if your punching a load of holes at one time bit of a pain in the arse having to use a drill so you can use the punch tool to begin with. maybe someone can come up with a quick release tool that punches the starting hole or even an adapter that doesn't require a starting hole to be drilled.

    • @efixx
      @efixx  3 роки тому

      All great points 👍🏻. Tomorrow this tool goes head to head with a Mandrex electricians hole saw kit.. should be interesting 🤔

  • @tc6907
    @tc6907 3 роки тому +2

    Great bit of kit! I’m sure it has it uses somewhere but very long winded

    • @efixx
      @efixx  3 роки тому

      I hope you mean the tool is long winded - not our review! 😂😂

    • @tc6907
      @tc6907 3 роки тому +1

      @@efixx 😂😂😂 not at all! I love this channel!! I could of drilled 15 holes tho by the time that has done one

  • @iknowmyfootball3901
    @iknowmyfootball3901 3 роки тому +2

    Cracking stuff gents

    • @efixx
      @efixx  3 роки тому

      Massive thanks 🙌🏻

  • @s.kxx1956
    @s.kxx1956 3 роки тому +1

    Great for manufacturing, or larger holes I would say

    • @efixx
      @efixx  3 роки тому

      Agree 👍🏻

  • @DanielBala-uf2zj
    @DanielBala-uf2zj Рік тому

    Awesome tool, however after few years of usage it starts to leak oil, I was not able to find a seal kit and Milwaukee repair center wants more then the tool itself for the repair.

  • @Mircea007
    @Mircea007 6 місяців тому

    I can think of two scenarios. 1. Not enough space for a drill and step cutter; 2. You can damage the contents of the box with the step cutter (RCBOs, wires, etc).

  • @cypeman8037
    @cypeman8037 3 роки тому +3

    Just got out of bed Gordon?

  • @sheungfeichan5684
    @sheungfeichan5684 2 роки тому

    How much for this model

  • @Dog-whisperer7494
    @Dog-whisperer7494 3 роки тому +3

    That’s the perfect tool for those who like having there tools nicked or there vans broken into
    Then having a view day’s off work wile you wait for the insurance company to pay out .
    Good idea 👍
    Great video guy’s as always .
    Nice tool though despite my negative comment just can’t understand why you would spend a load of money for something that is likely to get nicked .

  • @nextaliaburto2580
    @nextaliaburto2580 Рік тому

    Qiero. Saver. El presio

  • @9plusinstalaciones
    @9plusinstalaciones 3 роки тому +2

    🏆

    • @efixx
      @efixx  3 роки тому +1

      We’ll bring it over with us

    • @9plusinstalaciones
      @9plusinstalaciones 3 роки тому

      @@efixx Hahaahahah😂😂😂

  • @chrishatton8197
    @chrishatton8197 3 роки тому +3

    wow, what a lot of faff! If you have to pilot the hole with a cone cutter, why not just follow through? By the time you have set up the tool you could have deburred the hole with a file or deburring tool!! Nah not for me thanks, I just bought a set of cone cutters from Aldi for £4

    • @efixx
      @efixx  3 роки тому +1

      Sounds like a bargain from the central isle - let us know who they stack up.

    • @chrishatton8197
      @chrishatton8197 3 роки тому

      @@efixx I have to say they really aren't bad! I bought a set of 3 well over a year ago and I was using them daily and they are just starting to dull now. For £4 I'd stock up haha! Great content guys.

    • @kenbrown2808
      @kenbrown2808 3 роки тому +1

      @@chrishatton8197 do they cut clear up to 88.9mm? because that's one of the key sizes I use mine for.

    • @chrishatton8197
      @chrishatton8197 3 роки тому

      @@kenbrown2808 Cool man! If you use a tool like this for an application like that then 100% totally worth it. In my experience the average spark cuts 20, 25 or 32mm in to metal which the cone cutters do.

    • @kenbrown2808
      @kenbrown2808 3 роки тому +1

      @@chrishatton8197 i do carry a step bit in my toolbox, but i use it more on plastic than metal. Most of our metal boxes are prepunched, so we simply knock the slug out by hitting it with a tool. If i have to drill a many conduit holes, it's worth the bother to grab my can cutting bit that i carry in my punch kit. Much better tool for the task than a step bit or a hole saw.

  • @peterfitzpatrick7032
    @peterfitzpatrick7032 2 роки тому

    £1'000 excluding VAT ... ??
    Q-MAX plus an impact driver (which we all already have) & you're good to go...
    I love my fancy tools as much as the next guy, but I don't believe in pissin away good money for no good reason... 🙄😏

  • @mattylad8035
    @mattylad8035 3 роки тому

    A hydraulic punch has just the same punches, does the same job and at a fraction of the price.
    Unless your making hundreds of holes every day then this is OTT.

  • @ifixforu8073
    @ifixforu8073 2 роки тому

    Nice but no one has that much time in their hands when u working

  • @TheEulerID
    @TheEulerID 2 місяці тому

    11.1mm is a 7/16ths of a millimetre hole it being an American tool...

  • @niceguy235uk1
    @niceguy235uk1 3 роки тому +3

    £1000 ??????!!!!!?!?!?!!?!!!??!!!! Haaaaaahaahaaaaaa.

    • @efixx
      @efixx  3 роки тому +2

      🤫🤫🤫🤫🤣🤣🤣🤣

    • @efixx
      @efixx  3 роки тому +2

      Tomorrow it goes head to head with an electricians hole saw kit 👍🏻

    • @kenbrown2808
      @kenbrown2808 3 роки тому

      that's a lot. the US kit is $1000.00 which would be around 600 pounds.

  • @n4thb4dc0
    @n4thb4dc0 3 роки тому +6

    So your drilling a hole anyways, so what's the point in this overpriced piece of rubbish?

    • @efixx
      @efixx  3 роки тому

      Comes in to its own for larger holes in stainless