How to Change Tie Rods (inner and outer tie rod ends)
Вставка
- Опубліковано 3 гру 2013
- How to replace inner and outer tie rods. This video will show you in depth how to change the inner and outer tie rods of your car or truck. You need a special tool, an inner tie rod end tool, to complete the job (this can be rented for free at your local parts store). The job straight forward and anyone with basic tools can do it!
Inexpensive tie rods: amzn.to/1XckepV
Tie rod tool I used: amzn.to/1XcjTUf
Inexpensive Tie Rod Tool: amzn.to/2j7fwYj
Torque Wrench I used: amzn.to/1XcoPs8
How to check to see if your tie rod is bad: • How to Tell if Your Ti...
Tie Rod End Cutaway: • Video
Become a ChrisFix Subscriber→ ua-cam.com/users/subscription_c...
Instagram→ / chrisfixit
Facebook→ / chrisfix8
Website → www.ChrisFixed.com
My Channel Home Page → / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - Авто та транспорт
I'm 50 years old with four vehicles and I can honestly say you've given me the drive and vision to want to be a small time mechanic for me and my friends. Thank you.
😂
ẞßssß
&
Absolutely 💯 correct..you should be teaching in college..you are an inspiration thank you.....👍
Hey i have this issue I've changed everything tire rods bearings I even put a new coilover on. But every time I run over a bump I hear something I almost sounds like something is loose I have checked everything and nothing is loose
Dude you've been saving my ass for nearly a decade now. I can't thank you enough. Just TODAY because of your videos i saved over $1,000 doing my brakes and inner tie rod end myself. I hope you make bank on these videos because they are incredibly valuable.
What you got right is not compromsing on a good shot of what needs to be done. Everything is visible and each step is clear. Im so grateful for what you do.
I'm glad you saved that much money doing the work yourself! Thanks a lot!
that was some of the best step by step camera work with analysis ive seen for an automotive repair video...good work
Thanks a lot! I try to do this with all my videos! Glad it was helpful!
@@chrisfix It's also cool, that you reply even to comments on older videos! Btw thanks for the video, I am planning to have tie rods done and now I know, what's what and how it works. Overall I've seen nearly all your videos (some of them multiple times) and you inspired and educated me so much! Looking forward to the video about Christmas presents tips, publish it soon, please! :D
Man replying to videos 10 years later that’s the dedication we love 😊
Seriously!! I just inherited my dads tools from his autobody shop that he sold, and I was youtubing how to use each of the specialty tools. I got one of those inner tie rod changer sets so I figured I'd see how it works. This is by far the cleanest tutorial i have ever seen on youtube. Well done brother!
7 year old video.. And Chris is still responding to the fresh comments. Legendary
You know it!
This guy! 😂
I like how you explain every detail of the process, it's very helpful for ppl like me and others that know how to turn a wrench but has never been exposed to certain areas of the car.
Thank you sir, great videos as always👊🏽🤙🏽
@@chrisfix wheres the energy in the intro:(
Pretty wholesome fact. I can't help but notice how much more confident he became as the years progressed.
Chris is super thorough; he assumes you know nothing and covers every detail. Excellent video!
This is exactly why I prefer his videos over countless other fixers on youtube. Keep it up Chris!
Jason Nilsson I do know nothing but with his help I am able to learn and work. Thanks Chris!
I hate mechanics who are so vague and they get pissed when you ask them a simple question about how or why. Like they’re guarding the knowledge they were born with or something😒
Jason Nilsson you are right. That's exactly what we want 👍
This guy is good shit
Amazing how you gained all this confidence within these past years. You deserve every subscriber man
Thank you
nice
This video combined with your brake and rotor videos, you've saved me an easy 1-2k my dude. Mechanics around here are crazy expensive.
Chris, that was simply excellent! Thanks for increasing my confidence in replacing my outer tie rod ends!
Chris sounds so much happier after six years 😂 he speaks so much faster and upbeat now.
Lolz I said the same thing was going to ask him if he can do a remake with a more life
So where did u get the new pin?
james klinski at any parts store. Tie rods and cutter pins are pretty cheap parts.
@@goldwolf0606 i wasnt askimg about the cotter pin. I mean the pin that he took out with a screwdriver
james klinski that little pin, they should come with the tie rod. The clamp for the boot that he broke should come with it too. If the tie rod doesn’t come with those things, you can buy them at the auto parts store. he chose to use a ghetto zip tie 😂!!! As long as it works!
Old Chrisfix: hey guys chrisfix here😪.... New chrisfix: HEY GUYS CHRISFIX HERE😃
i also love introduction, Hey Guys Chrisfix
Before and after money.
hardwork pays off
I was about to comment this. Watching this assuming it's a new video and it's like he's fallen on hard times and become clinically depressed
@@Strike86 6,63M subscribers and he is clinically depressed how come?
I've only seen a few of your videos at this point but already the quality and clarity is head and shoulders above the rest. Not to mention how much I appreciate the density of useful information, no fluff. Thank you!
GREAT video! Straight to the point, great editing, camera angles, very informative, and no drawn-out extraneous banter. THANK YOU!
agree with King Zone comments
I'm a long time mechanic and I must say that this video is right up there with the best! You're well spoken, explanations are great, camerawork is great and you know the terminology for what you're working with. Great job and thank you!
If you were a good mechanic... You would've noticed something very wrong with this video. Watch it again and get back to me.
@@sveni3798 okay, I'm ready to learn something. I watched the video again very carefully and really didn't catch anything this time around other than where he may have misspoke a few times. Now I must say that I don't have much experience with rack and pinion front ends because I haven't had to repair one yet. So, please tell me what was really wrong with this young man's video, I want to learn something.
It’s inaccurate and too imprecise to count the number of turns when removing the outer tie rod. It’s much more accurate to measure from the center of the tie rod end and a self-made mark on the tie rod itself. Since Chris is replacing both the inner tie rod and the outer, he would want to measure from the rack and pinion housing out to the center of the outer tie rod end before removal. Yes, he is going to get an alignment right afterwards, but I have seen different tie rod end lengths. This can render the car undrivable if using the turn count method.
@@johnnyv7618 also too much grease in the tie rod end. The boot shouldnt swell that much. Aka too much grease
I just updated the video with some edits. Thanks everyone for the comments and suggestions! Give the video a thumbs up if you thought it was helpful!
I have a 2013 GMC Terrain. I got hit and the tie rod is bent. I've called the parts stores in my area and they all quote me $100 to rent the inner tie rod tool and they don't even know if they have the one for my vehicle. Any advice?
The tool costs $100 to rent, but you get the money back when you return the part (ask them and make sure this is their policy). I would rent the tool and see if it fits. You dont need to take anything of except the bellows boot and just slide the tool on top of the tie rod and see if it fits. It should fit, the kits come with different size attachments.
It was their policy. The young guy on the phone didn't understand that it was a deposit of $100...Thanks a lot.
ChrisFix I had to order parts because my vehicle is new (crash damage). The new inner tie rod has no pin. the tie rod end has no grease fitting. They did, however send the original clamp for the boot, so I won't have to use zip ties. Thanks for the video, it was a big help.
Great! Glad things worked out and glad the video is helpful so you can fix your car!!!
Whenever I have car work to do, I try to look for your videos. I know I can trust what you are telling us. Your videos are SOOO helpful. Thanks a million!!!
I know this video may be very old, but I just want you to know how special you truly are man like I mean it to the bottom of my heart you help me, fix my whole inner and outer tire rod in like two hours, bought rental tools, and everything. Chris definitely help me over the years to fix my vehicles you are a truly awesome person man thx so much.🙌🏾🥲
Hope to meet you one day brother .
Dude. Your videos rock. No fluff. Straight to the point. Good steady camera. Audio volume and speech speed are just right. You've saved me a crapload of money and taught me a lot in the process. Kudos to you sir!
13:25 “Now go get your car aligned” is the meanest quote I have heard Chris 😂😂
Changed nearly my whole suspension (inner and outer tie rod ends, upper and lower control arms and sway bar end links) all thanks to this fantastic man! Thanks chris!
same thing here but its been a mnightmare
I don't ever comment on people's videos, but you're solid and to the point with you're stuff, you get to the point and explain everything very well. You made changing my tie rod ends a pretty easy experience and saved me some cash. Thanks man, much appreciated.
I may have posted this on your video before, but I had a 2007 Nissan Maxima was was having suspension and steering issues. Using your videos, I saved over $4,000 as Nissan quoted me $5,400 to do the work. I paid $1,000 for parts and tools.
Dude where do you live? That car doesnt cost 5400 dollars even in Turkey where the cars are one of the most expensive stuff.
He didn't say the car cost 5,400 dollars. He said the dealer was charging him 5,400 dollars to do the job. He saved 4,500 dollars doing the job himself, he spent a 1,000 dollars in parts and tools did it himself.
Jay Pete don’t ever go to the dealer because they overcharge you waaay to much for a simple fix go to an independent shop that’s been known for great service but remember never the dealer
Jay Pete nissian is an amazing vehicle I have a 2007 Nissan Murano with 386,000 miles
I had the EXACT same situation with my 2004 Honda CRV! Got a $5,400 quote from a local reputable mechanic, but did it myself for $1000 in parts and tools!
I've replaced at least a dozen tie-rod ends. I've NEVER had one that would come out with a rubber mallet.
I've always used a mini sledge hammer, and hit the spindle from the side. Usually 3 good wacks will pop it out. Also, instead of counting turns, I pull the inner and outer off intact and measure the distance from grease fitting to fitting. Then make sure the newly assembled unit is the same.
the way the rental tool slides over the rod how do you remove the inner tie-rod if the outer end is still attached? I may be doing this job soon.
I usually use the pickle fork tool to separate the inner.
.
i have remove my rod a a few time and taping it out never works i always end up hitting the spindle to get it off
Well I don't tap it. I use a mini sledge hammer and hit the side of the knuckle about as hard as I can.
Chris, tonight or tomorrow morning I will be changing my outer tie rod ends on my 2007 Nissan Murano. I feel very confident doing this because of your video. I’ve always been super mechanically inclined and love DIY jobs. I originally was going to take my vehicle to a shop. When it comes to steering I have not attempted anything prior. I looked up how to check if a tie rod is bad an discovered you and your vids. I am incredibly impressed with how instructive and thorough you are. Because of your instruction is why I’m going to change these out myself with complete confidence. My driver side outer rod is sooooo loose one can lightly hold onto the bellow and spin the rod. CRAZY. I will comment as to how the job went. Thank you, Chris!
Chris you are a very generous man! I'm a 51 yo female that has now done almost all of my own repairs on both my 02 Ford f350 & my 07 Toyota FJ because of your videos. Thank you for helping this old gal save money & find enjoyment in getting greasy!!
you aint old...
Chris deserved his happiness after 6 years. He never quit making videos for us. College campus is closed due to coronavirus allowing me to watch his videos to educate myself. You're the best Chrisfix!
WV591 You can look up the torque specs online, ask your parts store, and some parts come with instructions that tell you.
Thanks for the video... it always good to know what you are getting yourself into before attempting something you've never done before. We were successful in changing ours out without to many issues. We did have to have to remove the sway bar linkage in our project because it was in the way but it needed replaced anyway. Thanks again!
Thank you for your easy to follow instructions. I’m the type of person that needs to know how something works to know how to fix it. You do a good job of explaining the mechanics of a part as you show how to replace it. The close ups help a lot. My ex was an auto mechanic but I never paid attention to what he did when he fixed stuff. I wish I had but now I can do basic fixes. This looks doable for my skill set. I think this is the issue on my CRV. Front end makes a horrible clunking sound when going over bumps, turning sometimes, and braking hard. It started when we were out on a very bumpy rocky road. At almost 300k miles I’m not surprised lol.
You, sir, are a national treasure. I’ve been watching your videos for a while and always learn something new with every video. Thank you so much!
I'm became a mechanic overnight by watching ChrisFix videos 👍
Just did this on a 89 240sx thanks to this video and it helped so much! Definitely important to get your car realigned because wow is it out of wack now...
You describe step-by-step and don't put fluff in your videos. Thank you very much for not wasting our time with stuff we don't need and filling the time with points that we do.
this man saves me so much money
I like the education that accompany the videos..''' Wish we had UA-cam 35-40 years ago & the internet too lol... Back then you either learned by trial & error, or had a friend, father or grandfather who worked on vehicles.... I had to learn by trial & error because my father was all thumbs & my grandfather gardened in his spare time & paid a mechanic friend of his for vehicle repairs. Now back in his younger years, he even had a Farrier re-shoe his horses. No joke there....
Wow, has Chris ever evolved as a presenter. The information has always been bang on, but the delivery is much more enthusiastic and entertaining today. Great job Chris, you have helped and entertained millions of people.
You and a few other You Tubers are the reason I still go on You Tube.
This is the best video that I have seen regarding tie rod replacement. His video was clear and he explained the process much better than any of the other videos that I have seen by a mile. Good job.
Your videos have no fluff, which is fantastic...no unnecessary shots of you, just clear, easy instructions...Onward n Upward
Chris, Just wanted to say Thank You for sharing your knowledge with others, I did the inner and outer tie rods According to the videos instructions, I'm not mechanically inclined, but you provided the right information step by step and I managed to get it done.. Thanks again, Wishing you continued success, Congratulations on over 7 million subscribers..
That's what I love to hear! I'm glad you managed to get this done on your own! Thanks a lot!
how you get all tools to get the job done? for me, outer tie rod is just fine to fix, but not inner one, the challenge.
do you have to use any specific grease?
@@Chris-db9vt general purpose grease should work just fine
@@chrisfix doing my on jeep 2007 4.7 v8
Chris fix pre hand ✋ expression classes. In his current videos, Chris’ hands 🙌 are almost as enjoyable to watch as his work. I really appreciate you sharing so much of your time helping so many with tips and techniques to sort out their own automotive work. Before I tackle any vehicle issues I look and see if Chris has done it. Nothing like watching first, then gaining the confidence to do it, followed by the satisfaction of conquering it myself! This confidence has transcended into other projects non-automotive. Thanks Chris!!
If anyone is going to make a video, this is how it should be made. Very clear, concise and informative. I especially liked the part about the twisting 20X. Thank you.
Roman Roman
I have been wrenching on cars,trucks,tractors,race cars,etc,etc,74 years and in my experience his
20 twists(turns),wasn't enough,he forgot to allow for the extra length of the new inner tie rod !!!!! I would have cut off the excess to match the original length of the old tie rod and THEN turned the new end on 20 twists (turns) !!!!!.
♿ 🇱🇷
One minute into Chrisfix n chill and realizing my car needs new equipment.
You are the man, buddy! I’ve been watching your videos for like 5 years and really appreciate getting your insight and commentary on stuff. Thanks again and God bless!
Awesome tutorial Chris. Getting ready to do this repair myself. Just finished doing the CV axles , lower control arms , knuckle and hub assembly. 👍🏼
Chris I was about to say if you were hungry or sick that day? You're usually happy and super excited in every video 😅😅😅
This is such a weird video to watch because you’re so much more enthusiastic but you’re still so understandable to watch and helpful. It’s amazing!
You have helped me to save the day. Very helpful!!! Thanks for sharing. 👍👍
Simple and straight to the point. Great illustrating all aspects of the process. Extremely helpful and easy to understand
Thanks, Chris. This video definitely helped me to replace both inner and outer tie rod ends on my car.
Some Ford vehicles come from the factory with inner tie rod ends that don't accept a socket. They are perfectly round. For those cars (which happens to include mine!), there's an inner tie rod end tool made for this purpose. It's like a U-bolt/clamp that's serrated on the inside to grip better. Costs about $25.
Ford's suck.
Love seeing these old videos and comparing them to his recent ones. You really see how much he's grown as a UA-cam personality. Keep up the good work Chris.
You can put a piece of tape on old rod, measure old and new from tape to ends in addition to counting spins and it is much more accurate. Tape, a tape measurer and math. Often don't need to align. Awesome videos dude.
Thank you that's exactly what I'm going to do! :) God willing!
by far the best video I have seen on inner outer tie rod replacement - step by step - excellent. I am new to front end issues - I will be tackling this job for a 2005 dodge 2500 4x4 this month. thank you very much. I agree with King James - makes me want to be a shadetree mechanic.
This is one of the best demonstrational video's I've ever seen! Chris Fix you done a hell of a job making this. Camera work is outstanding and some of the best I've seen. Every word spoken is something we all need to hear. No b.s. in this video. A bunch of great tips in this! I really appreciate people who are about their shit! Great all around job on this video! Great teaching! Thank you sir!
Keep up the good work! 👍
Bro...so detailed and informative. Thanks so much!
Man you don’t know how much we appreciate your videos good job man
im a college student in the UK and im behind on some work. i searched "remove steering arm ball joint" and clicked ontop video, instantly recognized the iconic "hi guys its chris fix here" and i knew i was gonna pass this write up, thank you chris, your a savior
Glad the video was helpful
Nice tutorial!
I took my 08 Cobalt in and was quoted $490 for this an alignment. You saved me a lot of money, thank you.
Thanks for all the great videos, I was about to go and pay to have this done and now you’ve given me the confidence to do it myself.
You are very good at what you do and give ordinary people the ability to accomplish jobs like this by themselves without having to take it to the shop which would cost a fortune, keep up the great work..... don't understand why your getting a lot of negativity from people smh, they could at least give you some credit cause your videos has a lot of value to them
+revellgordon1 thanks a lot man! The internet is filled with negativity so as long as I am able to help people, I don't worry!
Transmission troubled
revellgordon1 _Some people are born ungrateful; and they'd become_ *Ungrateful Dead* _someday!_ 😂
Great quality video, straight to the point and easy to follow. Amazing
I have learned a lot in this video. Quality video, clear sound no rush, no quick to finish up. Good buddy I will change my one next weekend. Good shot!!!!!
Your explanation and display is perfect. You could make a very good tutor or Lecturer. I really enjoy your videos from here in Kenya. Keep it up.
Thanks a lot
Desmond Barongo ml9ui890
He is! Just on the internet lol
I got my set of inner/outer for
Awesome!
This video helped me buy the right tool and fix both my tie rods inner and outer-please never stop making comprehensive replacement videos
I'm glad the video was able to help you!
Your my idle!!!?! I am 38 years old. I know it's a little late in the game but you have inspired me to learn all about fixing cars. I want to fix up my 2010 Ford fusion and you have shown me that anything is possible...I just love how your so perfect on every detail, and so organized. You have taught me that organization is the key to success
Thank Chris. You simplify things and that is a quality aspect of a great teacher.
Why the replacement parts longer/diff from the original it's supposed to replace....it.happens way to often than not...kind of defeats the purpose and causes more compensation on the other end?
Chris, Great teaching job, Thank You for being so informative and detailed. Very calm and focused, no useless banter or distracting elevator music. You should be proud of yourself.
Thanks a lot!
Nice
I got ready to take off the bellows boot and the TRQ video just glosses over it like it's the easiest thing. I like that you gave an in depth description of what to do... thanks for taking a little bit of time to explain something quite easy.
Hi Chris you are amazing…how nicely you are explaining single bits….you are very helpful for people like me, who are sorting own car at home.
HEY GUUYS! It's amazing to see how far Chris has COME since these older videos. I love it 😁👍
This is the best video for tie rod thank you brother I love people like you like to share knowledge to others
Im glad the video was helpful!
Pago Mon I feel the same way, all the mechanics I know are D*cks when it comes to sharing the knowledge bestowed upon them from the car gods. 😂
Will Will Amen to that
Chris "amazing" Fix has the best repair videos by far. No nonsense easy to understand videos on how to do it yourself. I have many cars and do almost all repairs myself. If theres ever a question, I type in Chris Fix first, every time, followed by the problem. I have always accomplished my repair task thanks to the excellent videos Chris provides. Chris, if your reading this, I cant tell you enough how much I appreciate your excellent repair videos, and I believe I can speak for everyone. Thank you sir !
I just stumbled on this video and was like woah.... Chris must be feeling under the weather. The excitement is missing from his voice. Then I checked the date, and noticed it was from close to 9 years ago. I'm glad I caught the newer videos first. Your excitement is very addictive!
People that dislike this video are mechanics they don't want people to know how to work on their own vehicle that way they can screw you over by not doing every step and keep the money flowing in their pocket." Big thanks to ChrisFix "
Working on your own car is one thing, but having the money to buy all the tools is another.
Mark F definitely. I have changed myself the disk brakes and brake pads. It cost me 33 euro. 1 service said they would do for 180 euro, second for 120 euro. Doing yourself is much cheaper.... Now I need change tie rods, and going do do myself again.... only the way for a student, who doesn't earn much....
Firestone wanted $450 for front brakes and rotors. Cost me $60 and did it myself.
Well look at what you said man. I mean come on. Get real
good
You just saved me $400 in repairs. Thanks bro, much respect
Goodness gracious, your videos have never been more useful than this one. I have watched and followed countless tutorials of yours and they have all been super useful but none saved my butt more than this one because I would have fucked up on every step without it. I wish I could double like this video because it deserves it.
Although I am still waiting for that weekly video, Chris.
Chris your videos are TOP TOP tier. I have watched nearly All of them just to know/learn. A suggestion for the sacrificial clamp over the hose boot is to use a plumbers sized pipe clamp. its easy to apply and can be torqued to hold without over doing it.
I enjoyed his presentation very much. In depth explanation without putting me to sleep. Nice job.
I agree with you
Very detailed and by far the best tie rod video on the internet! Thanks so much.
Thanks a lot man!
I was looking for how to change my tie rod at home, and realised I'm missing a few of the tools needed. I'll be shopping for them on payday, believe me. This is a lot easier than I was led to believe from my mechanic friends, who said it was the worst job to do when it came to basic suspension maintenance. I enjoy the helpful tips throughout also, it allows me to get an insight into what the hell is under my car because I never did the whole mechanic thing. Thanks for the video
About to do this on a 03 Ford explorer. Looks pretty straight forward. Best video to find. Thank you!
You're absolutely wonderful! What a perfectly explained & simple instructional video! Well done, dude.
My husband and son replaced tie rod and control arm because this video was so precise! Saved my son a lot of money, and add some father/son time. Thanks!
That's what I love to see! I'm glad the video helped them out! Thanks a lot!
thumbs up because you are always complete, you have the questions in your mind that the diy person would as if you were here. thanks also for the clear visuals
about to tackle my inner and outer tie rods and lower ball joints on my 2012 ram 1500 4x4 5.7. Thanks for making a great informative video. I already did my hubs and upper ball joints. luckily i have a bunch of kits for doing all this stuff. keep it up friend these are awesome!
Explained very well to understand. Thank You Sir.
Mr. Fix, you are "The Man".
Love your video simple and you show everything so many people leave out details assuming you know a little already so thank you
Awesome video, clear, well articulated and explained, to the point, no plugging products, no R&B music. good camera angles.
10/10
Rockabilly music is not a vibe😮
I love that your videos are so thorough and easy to understand... I have 63's I'm working on, but your vids help me to have a better understanding of what I'm doing... thank you so much!
Awesome! I’m glad the videos are helpful!
asixfootbetty jl
Dude that was the most through video I’ve scene to change inner and outer tie rods. I been sweating 😓 the $750 Meineke wants but now I can see exactly what’s involved and I got this.
Thx 👍🏾
Thanks, Chris, for another great 'how to' that my son and I will put to use straight away! Thanks for doing what you do, and helping people come out from the dark of fear to do their own work, and fuel their desire to learn more! God Bless you, dude! Gary&Lucas @Edmonton, Canada
All fun in games until you crash and die because you did your mechanic work wrong. Are you really that cheap lol
PPP pop pop Po pop pop up p³pp3pp30pp0pppl
Thanks so much for this! Going to change my Tie rod, AC axel, and ball joint tonight on my town and country.
Tired of paying so much having a mechanic do it for me. I’m a mail lady and need lots of car repairs, so I guess it’s time I learn how to do these myself!
Yea just make sure you get it aligned
It's just too many parts to remove.
Chrisfix
Thank you for all of the videos that you make for us DIY type people. Me being a woman. I got tired of getting ripped off by many mechanics. I just so happened to run into your videos being curious. Even since I have done a couple of things to my car. I am grateful for your videos. Please continue to make more for us.
Be blessed.
I already know how to do the outer but thanks for the help on the inner bud. Keep up the good work habibi
hello chris fix, i have a 05 bont. thank you for the videos.You saved me like 200.00, the shop wanted to charge me for a outer tie rod. they said it was a 92.00 part, got it advance for 18.00. then 100.00 for labor. ty again.
$100 labor per side??
Thanks for posting this video. It gave me the confidence to do the job myself. It took a lot longer than you so it was a little frustrating, but I finished the job.
Omg I was not expecting that intro 😭😭I’ve only seen new vids till now ig 😭😭😭glad to know he sounds a lot happier
Hey Chris keep up your good work , your videos are great right to the point no b.s. prefect, thanks buddy
Of course it's very helpful btw I'm doing the same job on my truck after watching this.. Thanks Chris fix
I watched the entire video even though I didn’t need to change my tie rod, but it’s just so interesting watching Chris explain and show all these things.
Honestly I believe Chris has the most USEFUL channel on you tube. I hope his videos will be here for eternity so my kids will learn from them. Can not thank you enough.