The second method worked for my laptop, thank you so much , I was going to take it for screen replacement that would would have costed me 500 dollars, it was software problem.
Um chaq I find your video from years ago about the Mac not turning on I did as you taught the step It came on but it started glitching and flickering after 5 sec Could it be caused if the battery isn't fixed properly
i turned my macbook a lil bit after he said something about it'll look different depending on the angle and the second i grabbed my macbook screen to rotate it the top half of the screen which had transparent glitching lines, it looked better then before now atleast.
wish i could send a video cause there's no way i can explain my problem 😢 basically i was on my mac for like 20min before closing it without turning it off, as i usually do when i know i'll use it again later. when i opened it back up the screen had some blue on it flickering depending on the angle of the screen. i turned it off and on again and now depending on the angle of the screen there's blue, white and grey, flickering...... or sometimes just my regular old screen..
Hello Chaq my macbook is the late 2009 version will this work for me⁉️ And if so my buttons on the left hand side are (Fn), (ctrl) which i think is control (alt), and (cmd), which i think is command... Can you help ASAP Also if i do it and it turns on i cant see the thing to press to turn it off i have to make the power run out to turn it off
I need help😶 I don’t know how to explain it but what happened was that my MacBook was working fine but then I left it alone for a couple hours and when I came back on the top of my screen had lines. I’m not if it’s because it’s old or something but I never got it wet or bumped it against something or anything like that. Please help Edit: it got worse! I reset it and now everything has lines!
Sir i have a connecter problems. when i open the screen it shows pink Blink but when i bend my screen it is fixed . Can you provide how much the connecter cost in india.(when i go apple service center they are saying that it is screen problem). Please reply if possible 🙏
Please tell me what happen my laptop was working fine besides from the glitching screen and right after I tried your PRAM method mine started showing a black screen and the apple logo would not come up on the screen but I am hearing the sound when I turn it on what's happening please help
Hey I've tried the restarting nvram method worked Gud.. But then the screen flickering comes back. Also my system is updated. Do u think there's a possibility of physical damage or sumthin?
Thanks for your videos , My Mac book air same model as yours , the keyboard malfunctions example Letter U does not press , and then buttons press on its own
Hi, I need help 😢 I have the same problem with the lines in the screen and it turn off followed by 3 beep sound, I've tried the ram memories in other laptops and I've also tried other ram memories and it does not work, and I already cleaned the slots and memory sticks... Please help me 😢!!!
This is silly. You cannot ask Apple to just change your video cable. It's not possible. Apple just replaces assemblies. As for resetting PRAM/NVRAM/SMC etc, it's useless for hardware issues and rarely fixes anything. You should work for Apple.
Yo may have to go into SYSTEM PREFERENCES>POWER. Check the box to show the battery level icon. Sometimes resetting will cause the icon to disappear and other personal settings may change, as well.
@@Chaq not much it works perfectly then It start to get hot and just shuts down and does that noise inside and screen glitches a lot it works max 30 mins or less depand what I play or do
✅You can still view your macbook screen on an external TV/Monitor with this type-c/HDMI adapter - amzn.to/4cFGLnT
Thank you, this was super helpful. I now know it’s the connection to my screen that is broken and not my screen
This is the best video on this I found so far. Very detailed and clear. I’m gonna try these fixes following your video again. Thank you!
I appreciate it🙏
Omg it actually worked !!! Thank you thank you thank you ugh !!!! I can finally finish my work thank you so so much !!!! I was about to cry
The second method worked for my laptop, thank you so much , I was going to take it for screen replacement that would would have costed me 500 dollars, it was software problem.
Glad to know it worked!
Can you use the buttons on the right side too? My left options button is not working
Booting into safe mode worked for me🎉🎉🎉. Thanks Man🙏
And it keeps coming back again 😢
Hi, which macbook model do you have? Did you try updating your software?
MacBook Air (Mid 2013). Quite an old machine.
I don’t have any update. Currently at Big Sur 11.7.10
Um chaq I find your video from years ago about the Mac not turning on
I did as you taught the step
It came on but it started glitching and flickering after 5 sec
Could it be caused if the battery isn't fixed properly
it seems like it got better after clearing the RAM but it hasnt gone away completley. what are your thoughts on this?
sir i did the second step but mc book everytime i use it as i turn it on it always take too long to wait may be an hour before it restart to go back
everytime i turn it on it goes like that and it too long to wait before the mc logo goes back again
This worked for me !!!!!!! Thank you so much !!!!!! 🎉
i turned my macbook a lil bit after he said something about it'll look different depending on the angle and the second i grabbed my macbook screen to rotate it the top half of the screen which had transparent glitching lines, it looked better then before now atleast.
My Mac boot only work with safe mode pressing shift key 😢
wish i could send a video cause there's no way i can explain my problem 😢 basically i was on my mac for like 20min before closing it without turning it off, as i usually do when i know i'll use it again later. when i opened it back up the screen had some blue on it flickering depending on the angle of the screen. i turned it off and on again and now depending on the angle of the screen there's blue, white and grey, flickering...... or sometimes just my regular old screen..
Hello Chaq my macbook is the late 2009 version will this work for me⁉️
And if so my buttons on the left hand side are
(Fn), (ctrl) which i think is control (alt), and (cmd), which i think is command...
Can you help ASAP
Also if i do it and it turns on i cant see the thing to press to turn it off i have to make the power run out to turn it off
I need help😶 I don’t know how to explain it but what happened was that my MacBook was working fine but then I left it alone for a couple hours and when I came back on the top of my screen had lines. I’m not if it’s because it’s old or something but I never got it wet or bumped it against something or anything like that. Please help
Edit: it got worse! I reset it and now everything has lines!
Did you get it fixed?
Did you get it fixed yet? I’m going through the same issue with mine.. it just happened
Sir i have a connecter problems. when i open the screen it shows pink Blink but when i bend my screen it is fixed . Can you provide how much the connecter cost in india.(when i go apple service center they are saying that it is screen problem). Please reply if possible 🙏
I purchase M2 MacBook 4 months ago but today all of sudden on display black ( flickering line) infront of the display
What should I do?
tell mommy to buy your spoiled ahh a new one
same issue for me
Please tell me what happen my laptop was working fine besides from the glitching screen and right after I tried your PRAM method mine started showing a black screen and the apple logo would not come up on the screen but I am hearing the sound when I turn it on what's happening please help
Hey I've tried the restarting nvram method worked Gud.. But then the screen flickering comes back. Also my system is updated. Do u think there's a possibility of physical damage or sumthin?
Thanks for your videos , My Mac book air same model as yours , the keyboard malfunctions example Letter U does not press , and then buttons press on its own
Hi David, I'm sorry to hear that! Please watch this tutorial - ua-cam.com/video/X8cj-od0rvk/v-deo.htmlsi=D2j_9cy-PxF68OCM
Safe mode worked for me, does that means i can only use like this?😢
i try this method its really worked thank you
Looking forwards for a miracle to happen with my mac. The only option that I tried it’s the hdmr
I pray for mine too
Thank you! Step two worked!
IT WORKSSSSS THANK YOU SOOO MUCCCCHHHHH ❤❤❤❤❤❤❤
omg tysm I literally thought my Macbook gave up on me 😭😭
Did it work for you?
@@EmmanuelChidera-ly2ueyeah
Hi, I need help 😢
I have the same problem with the lines in the screen and it turn off followed by 3 beep sound, I've tried the ram memories in other laptops and I've also tried other ram memories and it does not work, and I already cleaned the slots and memory sticks...
Please help me 😢!!!
Hi! Try turning on your mac pressing and holding the Command-Option-P-R keys for 10 seconds
@@Chaq I already did but didn't work, in fact I do it often
Thank you great instructions!
just tried it now and sevond method worked ❤🎉
OMG it worked. Holy shit! Thought I was going to have to return my mac
Step one worked. Thank you. 🙏🏿
This is silly. You cannot ask Apple to just change your video cable. It's not possible. Apple just replaces assemblies. As for resetting PRAM/NVRAM/SMC etc, it's useless for hardware issues and rarely fixes anything. You should work for Apple.
Please I have just one green line on my Imac can I use this tips???
Absolutely yes!
The safe mode thing worked for me 👍👍👍
The safe mode worked perfect on MacBook Pro 2012
THANK YOU SO MUCH!!!
Hi can you help me i follow the step 2 but my mac stock into all clitch lines i wait for too long but it doesnt go back😭😭😭😭
Does it take too long to wait the step to until the apple logo appear again??????
Thanks for the help :)
This didn’t work for me 😢
Great.... Thanks guy
Can you tell me please i open 45degree and screen work but when i open 90 degree it’s showing line so where is the problem screen or software
Well, I have the same problem, and I just tried it at 45 degrees and it’s normal. Please have you been able to fix yours ? Mine just happened today ??
hardware
hi my screen flicker when I used it for too long
Hi try resetting dram
I am using a mac book air 2020 model and it didn't work first try
Omg thank you so much
It worked
Thx for all
I need your help 😢
It worked thank you!
J’ai un MacBook Pro 2019 sa pourrait fonctionner ?
Yes it should work for your 2019 macbook pro
You're the best.
Thank You this worked!!!!!!
Fixed mine!! Ty
The best!!!
Not working to my MacBook Air
Does your macbook turn on? If not please watch this video - ua-cam.com/video/m6HJ3pUM8Hc/v-deo.html
Sorted it, thank you!!!
All this not working 😢
Can you help me😢
2nd method works for me. But my battery is not showing now.
Yo may have to go into SYSTEM PREFERENCES>POWER.
Check the box to show the battery level icon. Sometimes resetting will cause the icon to disappear and other personal settings may change, as well.
@@Mike-fi5se Thank you, dear. My battery was dead. It it the reason.
Thank you so much
thankkkkkk you so much. God bless
The Mac doesn’t have an “Alt” key. You keep saying to press the “Alt” key.
He didn’t mention the alt key once and he shows the keyboard the entire time so you can see every key he’s pressing. Idk what you’re talking about
Also there is an alt key it’s the same as option key ,how does this have 4 likes
Shift + alt(option) key 😊
The Alt key is the Option key.
Depends on the country in Canada and America they call it option key noticed a MacBook from Dubai has the key labelled as ALT key
This didn’t work
bro night before the first day of schooo is crazy guys im cooked
Mine beeps and shuts down atftrr 10 mins and screen starts to glitch and make noise inside anyone knoes why?
And do you see any glitch during these first 10 minutes?
@@Chaq not much it works perfectly then It start to get hot and just shuts down and does that noise inside and screen glitches a lot it works max 30 mins or less depand what I play or do
Overheating GPU would have those symptoms. The best thing to try would be to clean the interior of the case along with the vents.
chaq please get a new charger
🙏😢
Nice .jpeg