DIY/How to... # Downpipe Instalation Alfa Romeo 159 1750 TBi Novitec Nero

Поділитися
Вставка
  • Опубліковано 7 лип 2017
  • This video shows how to install a downpipe on my Alfa Romeo 159 Ti 1750 TBi Novitec Nero and my impressions in terms of it's sounds.
    Sorry for my English. It's not very good!!!!! ahahahahah
    I hope you enjoy the video and subcribe my channel and give me a thumbs up!
    ------
    Support my project and give me a donatition:
    / incogn1t0
    paypal.me/InCoGn1t0
    ------
    Follow me on social network!
    Instagram - / incogn1t0_alfa
    Google + - plus.google.com/+InCoGn1t0
    Facebook - / incogn1t0-110183392803555
    UA-cam - / @incogn1t0
    -------
    Filmed by André Anunciada@InCoGn1t0 and edit by André Anunciada
    Material Used To Make Videos:
    Main Camera - Canon SX540HS
    Second Camera - Iphone 6 Plus 128Gb
    Main GoPro - Gopro Hero 4 Black Edition
    Alternate GoPro - Gopro Hero 4 Black Edition
    Main Laptop - Clevo P651RE
    Second Laptop - 2015 MacBook Pro 13'
    Editing Software - Adobe Premiere Pro CS6
    Second Editiong Software - Nero Video 2016
    As you can see from the title i'm mod again the exhaust of my Alfa Romeo 159 Ti 1750 TBi Novitec Nero.
    I made this because when i removed the mid silencer the resonance inside the car is a bit lound, then, when i fitted the downpipe i turn even louder, so i have to reduce this.
    The Resonator chosen was a Vibrant Performance@STC
    www.santerchips.pt/index.php?r...
    The workshop chosen to fit my resonator was the same as before, in this case the workshop of my friend Pedro Matos:
    / escapesldm
    I hope you enjoy the video and subcribe my channel and give me a thumbs up!
    ------
    Support my project and give me a donatition:
    / incogn1t0
    paypal.me/InCoGn1t0
    ------
    Follow me on social network!
    Instagram - / incogn1t0_alfa
    Google + - plus.google.com/+InCoGn1t0
    Facebook - / incogn1t0-110183392803555
    UA-cam - / @incogn1t0
    -------
    Filmed by André Anunciada@InCoGn1t0 and edit by André Anunciada
    Material Used To Make Videos:
    Main Camera - Canon SX540HS
    Second Camera - Iphone 6 Plus 128Gb
    Main GoPro - Gopro Hero 4 Black Edition
    Alternate GoPro - Gopro Hero 4 Black Edition
    Main Laptop - Clevo P651RE
    Second Laptop - 2015 MacBook Pro 13'
    Editing Software - Adobe Premiere Pro CS6
    Second Editiong Software - Nero Video 2016
  • Авто та транспорт

КОМЕНТАРІ • 52

  • @Rzut-Oka
    @Rzut-Oka 6 років тому +3

    Finally! thanks for English comments:)

  • @thegoofychannel
    @thegoofychannel 7 років тому +4

    please keep on doing english videos! your channel and content are both awesome! cheers!

    • @InCoGn1t0
      @InCoGn1t0  7 років тому +2

      Thanks. I will try to make more videos in English, or i will translate the videos like i already done.

  • @MilleniumMixTapes
    @MilleniumMixTapes 7 років тому +1

    Getting very hands on mate, good that you are doing your videos in English now aswell. Been trying to diagnose rattling brake calipers / pads on my 1.9 lusso for a while, no luck so far, might just have to replace pads as they aren't OEM ones atm, they are apec so maybe that will solve it. I see you've still got your undertray still on! Mine went along time ago.

    • @InCoGn1t0
      @InCoGn1t0  7 років тому

      Thanks.
      And the ratling should came from the brake pads. Try replace them. I have a video explain how to change it.
      Cheers

  • @emresancaktaroglu6430
    @emresancaktaroglu6430 3 роки тому

    Finally! In English....

  • @redwhiteauto1269
    @redwhiteauto1269 6 років тому +1

    Hi bro, have u achieved the ideal sound so far? I have a 1750 tbi with Novitec Neros too, i have also put a straight pipe through the mid box. The rest stock. And i find the sound is still too tame, just bassy. I wish for some pops. What do u suggest?

  • @davidvarela8739
    @davidvarela8739 4 роки тому

    Hi ! did you have to remap after removing the catalizer? but you just, remove and install and that's it. How come? thanks in advance! I want to do the same to my 2.2jts

  • @MrRui33333
    @MrRui33333 6 років тому

    hello,.. ola boa tarde , qual o principal beneficio ao se instalar a downpipe e se num diesel tbm tras beneficios , talvez mais ou menos , no sei, será que poderias me explicar o basico, pois eu tenho uma alfa 156 sw jtd e a desmiolei tbm a frente o que penso que seja isso e na altura fiquei um pouco reticente pois agora ficou muito largo logo a saida do turbo, ou seja , eu creio que o ideal seria tentar colocar um tubo em seu interior assim como fiz na panela do meio, bem, de qualquer forma creio que seja melhor pra o turbo, pois fica mais liberto, mas no meu caso,.. uhnmm, acho que poderia ter ficado melhor ,.. mas enfim, é que essa peça tbm há pra os jtd,s mas a acho muito cara ne !? bem mas o teu alfa é fantastico,. e claro é a gasolina ,..lol,.. logo, mais alfa

  • @giacomoguajana
    @giacomoguajana 3 роки тому +1

    Io monto le pance ragazzon. Con il downpipe cambia il suono? Devo mappare per forza? Da avaria il downpipe? Grazie

  • @zuluzulu8325
    @zuluzulu8325 4 роки тому +1

    hi, thank you for sharing the video, one question i noticed you didn´t install back the stock heat shield on the new downpipe, why? are you experiencing more heat in the cabin now? cheers

    • @InCoGn1t0
      @InCoGn1t0  4 роки тому +1

      Hello, thanks first of all. And I didn't fit the stock heat shield because the heat shield was connected to the stock downpipe. That's why I didn't fit it. And now the heat it's a lot lower than stock and I fit a thermal tape on the downpipe in order to keep even lower the temps

  • @thepalm2791
    @thepalm2791 7 років тому +4

    Hello :-) don't worry about your English. It's very good.

  • @Sonhador20
    @Sonhador20 Рік тому

    Tens algum vídeo onde mostra como mudar filtro partículas alfa 159 JTD

    • @InCoGn1t0
      @InCoGn1t0  Рік тому +1

      Boas, não porque nunca tive um jtd. Mas o que não deve faltar na internet são vídeo a mostrar como fazer

  • @xaviramx1
    @xaviramx1 6 років тому +1

    what did you do with the rear lambda sensor? do you have"check engine" now?

    • @InCoGn1t0
      @InCoGn1t0  6 років тому

      Hi, before I made this change I already deleted from ECU the sensor. That why o don't have engine warning light.
      Cheers

    • @xaviramx1
      @xaviramx1 6 років тому

      Its stage 2 remap?InCoGn1t0

    • @InCoGn1t0
      @InCoGn1t0  6 років тому

      Actually my car was stock, but i want to make a ecu remap.

  • @dharmz4696
    @dharmz4696 4 роки тому

    Is the mid silenced deleted in this video, because mine is straight pipe and doesn't pop so will the decat make pops and bangs

    • @InCoGn1t0
      @InCoGn1t0  4 роки тому +1

      Yes, I have the middle pipe deleted and only remain with the novitec rear boxes. It not pops and bangs , to make that you need a remap and enable that feature.

    • @dharmz4696
      @dharmz4696 4 роки тому

      @@InCoGn1t0 thanks if you want to see mine instagram that_159_tbi

  • @emresancaktaroglu6430
    @emresancaktaroglu6430 3 роки тому

    Did it decrease your under hood temperature? I have 1750 TBI too and it works very hot. Sometimes it warms my legs I can feel the temperature in the front seat. I think the catalyst in the downpipe increase the underhood temperature. I am thinking to install downpipe on my car. Does it work it? Did it satisfy you?

    • @InCoGn1t0
      @InCoGn1t0  3 роки тому +1

      the temps i guess decrease, but not too much. Every petrol engine radiates a lot of temps from under the hood. and for me every turbo car should have a decat downpipe to keep the turbo safe and healthy

  • @angelogiannettino6478
    @angelogiannettino6478 5 років тому

    Have you changed the finals exhaust in this video?

    • @InCoGn1t0
      @InCoGn1t0  5 років тому

      Yes, it has the novitec rearboxes👍

  • @atsocaled
    @atsocaled 7 років тому +2

    Boas André, consideras esta MOD interessante para o 1.9JTDM?
    Relativamente ao IPO, é pacífico ou poderá haver entraves?
    Um abraço e parabéns por este video.

    • @InCoGn1t0
      @InCoGn1t0  7 років тому +1

      +Renato Costa
      Viva, esta e sempre uma excelente MOD, seja em que carro for. Em relação ao IPO não sei, mas penso que se tiveres um catalisador não terás problemas.
      Abraço

  • @darkpsy19
    @darkpsy19 7 років тому +1

    what's the gearbox that comes with this engines, is it the cancer M32?

    • @InCoGn1t0
      @InCoGn1t0  7 років тому

      +darkpsy19
      Yes this was the M32. As far as I know there aren't many issues on this car with this engine. And many 1.9 Diesel engines with more torque and not many issues.

    • @mitsosbiz89
      @mitsosbiz89 6 років тому

      This comes with C635 gearbox. The same as in Giulietta

  • @filipaantonio9794
    @filipaantonio9794 4 роки тому

    Boas , acha que posso por um turbo nu alfa 156 1.8 ts ?

    • @InCoGn1t0
      @InCoGn1t0  4 роки тому

      Boas, claro que podes meter, agora não sei é até que ponto será fiavel. Sabes de algum projecto de esse motor com turbo? Se houver tenta saber o máximo de informação para veres quer o custo mas também a fiabilidade do projecto 👍

  • @sylvainteixeira5208
    @sylvainteixeira5208 5 років тому

    Boa noite, onde compras te o downpipe ? obrigado

  • @redwhiteauto1269
    @redwhiteauto1269 6 років тому

    Hi, is the downpipe replacement a full decat or half?

    • @InCoGn1t0
      @InCoGn1t0  6 років тому

      It's a full decat downpipe.

    • @davidvarela8739
      @davidvarela8739 4 роки тому

      @@InCoGn1t0 but did you have to remap ? sensors are gone so...what info is going to the ecu?

    • @InCoGn1t0
      @InCoGn1t0  4 роки тому

      After doing this modification I remaped the car but previously i disabled the sensors in order to don't have problems with lambda sensor. That's why I don't have any fault lights on the dashboard.

  • @machester7
    @machester7 2 роки тому

    Ola boa tardes, nao e preciso anular a fap eletrónicamente ?

    • @InCoGn1t0
      @InCoGn1t0  2 роки тому

      Este carro e a gasolina, logo não tem FAP. Isto é apenas o downpipe com catalizador. Já antes da troca por este downpipe sem catalisador já tinha anulado a sonda após o catalizador para não dar erro.

  • @konradwalaszek5704
    @konradwalaszek5704 2 роки тому

    Is it the same principe like in a Jtdm??

  • @MrVukovicivan
    @MrVukovicivan Рік тому

    Are you satisfied with that engine 1750 tbi

    • @InCoGn1t0
      @InCoGn1t0  Рік тому

      I no longer has the Alfa, but I love that car specially with that engine. Very strong and reliable 😉

  • @MMKJ
    @MMKJ 6 років тому +1

    👍🏻🤣

  • @sayedkhattab1842
    @sayedkhattab1842 3 роки тому

    this downpipe place like the giulia

    • @InCoGn1t0
      @InCoGn1t0  3 роки тому

      It's possible. Never checked...

  • @Boss2480S
    @Boss2480S 6 місяців тому

    Did you need to remap it or just install it?

    • @InCoGn1t0
      @InCoGn1t0  5 місяців тому

      Don’t need a remap to install this, but it may throw a check engine light because this was Catless downpipe. But to take the full advantage of the downpipe it’s better if you do a remap.