Відео

little late to the party i guess but the mr hop is made to work with a concarve nub not a flat one, you are basically wasting 70% of its potential surface area with the bb. at that point might as well flat hop your stock hop up system for 0 bucks

I was under the impression that if your bore is tighter you gain more fps and that pretty much it.

If you’re on a tight budget with a cheap replica like a cyma, I can see the value in doing this because I doubt the stock inner barrel is free of imperfections. Honestly though an aftermarket barrel is probably the more practical choice, I can’t imagine there is enough of a difference in accuracy to go through all this work at the ranges airsoft play happens.

6.01 for max fps, good nub and hop up bucking and you are good to go 😂

This was a great video by no means am i new to soldering but I was concerned about he dissipation and heat bothering the battery. You covered both concisely and dropped some great tips!

put the MAG5 Bucking (70°) in my SRS Sniper. Together with a prometheus barrel, I reach with .43g BBs 120m at 150psi with a spread of 30cm. Insane good bucking

useless

bought the full metal body version of this gun, threw a gate aster and a new VFC motor in it and it shoots like a dream.

Hey Reflex are you still there?...

Why not lambda 6.03?

Hey friend, who makes or where i can buy that hop up unit?

Consider keeping your hands out if the canera view - kind of disturbing as they fly around.

Wow! This is a truly professional comparison.

If bore size doesn’t matter then why do you have to change the air pressure behind it?

is the Maple Leaf SUPER Silicone still better, is it the best?

You should never use the iron itself to melt the solder to the connection. The iron should heat the contact surface enough to melt the solder. If you use the iron instead it may not have heated the surface enough to actually adhere. This is how you end up with cold solder joints. To clarify, the only time the solder should directly touch the iron is when tinning the tip to prepare for applying heat. I'm experienced in soldering, I'm just looking for ideas of how to not fry myself accidently while soldering a live power source.

you might cringe so bear in mind I'm just a dummy who know a couple things about a few topics. airsoft replicas are not my wheel house. I do know cars but also paint and reconditioning. again no pro I only know what has worked for me. I would think that spraying silicone to clean a barrel would be a stupid thing. all lube draws dirt and grit. I tr to tell people that but they refuse to listen. alcohol to clean but maybe cringe. I use a series or polish and wax that really has worked for me. nothing life or industry altering but it seems to improve grouping and the consistency. I start with a polish then move to a polymer wax. have you seen this done. it seems that I would be doing a comparable process just using different products, no? thanks for any help. I do it until my clean cotton rags are clean in and coming out.

your accent is perfect. I appreciate the info. much obliged. cheers

Would mag7 work on 1.2J?? Legal limit, but got Prometheus 7mm barrel (reccomendation is 1.3J or up) maybe someone tested already?

Great information

I am having an issue where the installed bucking doesn't hold the BB. BB just rolls right through it. What am i doing wrong?

Let’s go honest review

What is the best size of inner barrel for AR /M4 and what difference makes the lenght

What is the best for AR and acuracy ?

how about lambda L1 6.01？

Plz do not get this hop up

Hey bro, greetings to you. Im using Mr. Hop 70 deg right in my HK417 DMR. It shoots great but would like to test out the 7mm Begadi Pro 60 deg. Already have the inner barrel with a 7mm window (500mm x 6.03). Just wanted to know if this will be bstter than my current set-up or will it be worse???

Thanks bud.

my man from the lovely netherlands✊🏾 im comin over from germany 4 to 5 times a year...❤ what im wondering about is, i have 6.00 barrels on all my tm spec glock builds and cant picture the bb not touching the roof of the barrel🤔 i even have old madbull bbs from the early 2000s wich are 5.98mm...hard to grasp that thought of them having a bed of air around them traveling down the barrel.... good video tho

Do these fit zci barrels well they have a 5mm window, am I right in saying I need a fly mag 5?

Think about how much better that group would be if you used your sites.

it's had released long time ago........... but with this price it will beat "china" brand :D

Do you know if the mr hop would work fine in a stock Vfc Avalon saber?

Very helpful, thank you

Vorsk Eu18 87mm 6.03 I replaced with a lambda 97mm 6.01 & 60° Deceptercon. I lost 5-10fps but my accuracy want right up. The Deceptercon I think was the FPS loss

Great vid. People are quick to say the platinum line is crap due to the contacts. I would switch to perun hybrid anyways but good to know 350fps and 11.1 will save the contacts for a while. Thanks!

What a load of crap my pistol could shoot further

Can you please advise me 9n a build please I'm getting a Cyma 518 m4 & want to build a HIGH POWER accuracy target shooter not for skirmish. I will put a 6.01 barrel in 400mm or longer if room, what's best bucking? How high can I get the FPS? Whats the strongest spring? By what you said in video I'll need a new MOSFET what one? What cylinder, do I need to do that too?

Nice demo, thanks. Is this better choice than something like East Crane, Delta Armory?

Thanks for making this video. Between Maple Leaf, Nine Ball and Unicorn brands, which would you say produces the best quality barrels as you say that determines performance?

hey great video unfortunately you didn't upload the test shooting. But have you experienced which of the two buckings delivers better results? I'm assuming that the fly is very good for bullets up to 0.32 and that the mag probably delivers better performance with heavier bullets.

tight bore is usefull for pistols, because you cant just "uP thE PsI"

What type of barel is that? Does the barrel really matter? Or can i just use my stock barrel ?

i have a perun v2 hybrid mosfet installed in mine. is it okay to use 11.1 in it? or should i still stick to 7.4

Im still waiting your video, hope you are great

That's exactly why TM stock barrel's bore '6.08'. Tight bore barrel just mekes more FPS.

I hope you are alive and well! All airsoft techs around the globe miss you. <3

Can you do a video on how to change the hopup nub

Are you by any chance Danish?

U got any spare hopups lol?