I've watched many of your videos now and really impressed with the in-depth content, knowledge and honesty about the products you use, I'm also quite surprised you don't have more subs! Keep up the excellent content :-D I'm sub'd!
Aww thanks man, I will start more uploads again soon, as im on vacation atm. It means alot to me that people that watch my channel likes it, that is for me more important than amount of subs. And thanks again ❤️
@@reflexairsoft4648 Sounds good to me, will keep an eye out, Just watched one of your videos from last year, working in that sector, I hope you are still in remission from cancer. Have a great break! :-D
Thank you man, and thank you for the difference you make. Regarding the amount of subs, I Think its Down to me not spamming every other page with my stuff, I like to Think my subs are more “organic” and invested 😊
I use a MP5 but the 2 side pods on this thing that locks it in place on the M4's blocks it from going in. Should i mod in some grooves in the alluminum seat of the hop up or should i grind off the 2 flaps on the hop up? The hop up locks in place inside the magqwell anyway since it sits inside a circular tube so it can move anyway. And cant i change the nozzle size of the gearbox to fit this hop-up if its to long?
Hey I see that your BB go right through the barrel after you did the installation. I have issues with this and the BB won’t enter the barrel easily after installation. Any idea on what what could be the issue? I use a green G&G rubber and a 6,03 Madbull inner barrel.
hey i installed the hopup recently and it shoots amazing but the first couple shots maybe 20 or 30 of a full mag just drop but after that it works fine. like it doesn't shoot well when the mag is completely full any advice or thoughts on how to fix it
Hi, do you know any place where its possible to buy only the flat lever? I bought this unit second-hand and i only got the classic rounded lever but i wanted to use r-hop so i sanded it down. I dont have any special tools so i did it by hand and its not precise enough. I would like to get the flat end lever that normally comes with the unit but i dont want to have to buy a whole new unit.
In one of your videos you mention sanding one of the aluminum nubs flat and you had really good results. Is there any way you could elaborate on your results and the differencing in flight you saw compared to keeping the original curved shape of the aluminum nub. Would the 2021 Mr. Hop perform well with a sanded flat aluminum nub? Thank you for your thoughts.
I get such mixed results with this hopup , it works great in my friends stock krytac and nothing else , my guess is the nozzle length cause it doesnt feed 3 different kytheras and every aeg I own and it only runs in that krytac ... but stock vfc and krytac run in everything...
Good explanation of how to. But, I would like to see a part 2 on showing how and why the hop up can or is an improvement as you do a test fire and compare other hop up units with it. imo Otherwise your praising a product without any tangible results.
Hi mate, I love your videos, I just watch all of them in 2 days. You are amazing! I want to change my hop unit. Want to go for: Maxx me sport Bc Prometheus 6.05 275.5mm Mr hop 60 My doubt is for the improvement. In Italy the joules limit is 1. I have a ghost m erm by evolution not custom. I want to use it with 0.25 or at least 0.28 bbs. Do you think I’m doing a good upgrade? Thank you so much for your channel.
Does the maxx cnc m4p pro have issues feeding with some standard nozzles? I have the m4p and once installed it isn’t feeding the bb into the barrel I’m using a maple leaf tightbore 6.02 and a mapleleaf super macron 60 degree bucking
Depends, first test if the bb Can pass the lips and go into the barrel somewhat easy, if you need Force to push it through then the barrel to hopunit and bucking is not a good match. If it goes through easy, the yes sand a little off the lips, install and test, still not good, sand alittle more and test
Hey man, thanks for the video. I have a couple of questions if I may. I just bought CYMA SR25 and I was thinking of a few upgrades, but have a few questions. 1. These units should fit the SR25 right, no only AR15? 2. Dont these maple leaf buckings have some extra line also in the other direction that fits only maple leaf barrels? Like... 1 line is to slide on the barrel, and the second on is horizontal. 3. So with these metal pieces I wouldnt even need to order maple leaf omega nub if I get it right? Because it already has that shape? Thank you man.
Hey man thanks alot. 1: If you have seen my gun collection vid, i have a sr25 by cyma(cm.072) with the maxx Unit, fits no problem. 2: correct, the new ml barrels have a Line to fit the line in the mr.hop but the bucking will work on barrels without this line, no problem. 3: correct I never use omegas with the maxx unit, i only use the original installer aluminium nub. I use omega in other hop units.
@@reflexairsoft4648 Hey, sorry for a late reply and thank you very much for answer :) And I have a few questions again, hope you dont mind :D So it should also fit the CM.098 version of SR, due to its extended gearbox? Because that is the one I have. With this you mean even if I buy prometheus barrel and get mr hop I could do that? Like.. wouldnt that extra line push the bucking up and be non even on there, if you know what I mean? And one more question, which of the ml bucking is the best? I believe they all have a different sized contact patch? Thanks again.
Sorry for the late reply aswell, I dont get notifikations on this. The sr25 cm098 does have a different hop Unit than the standard m4 cyma, but it is still a normal m4 style Unit, so should be no problem So yes if you see my new vid maple vs maple, you will see i use MR hop on a normal Prometheus barrel, so the ring cause no problem. But the hop Unit in your cyma is very good, do not change it, change the bucking and nub instead As for the maple leaf buckings best to worst: Mr hop 2021 Mr hop Super macron Monster Macron
@@reflexairsoft4648 Hey hey, thanks for the reply again. I have just placed an order yesterday for the MAXX MODEL (blue edition from specna arms), LAMBDA barrel and mr hop 2021, before I got a chance to read from you that I should not even buy the MAXX, but here I am haha :D Just...1 more question if I may. I read somewhere that I should have a nozzle length of 24,00 - 24,30 for MAXX + sr25 but the stock one is 25.00 for the CYMA one that I bought I believe. Do you know anything about that, will I have to change the nozzle too?
Where is your r hop patch on the hop window? Ive been told 50/50 that you absolutly need one or that you just need a good quality flat hop bucking. Honestly frustrating because my gun shoots to the left after 10 yards rn and i only use the flat hop promy purple bucking.
Hopefully you have it sorted by now but... The maple bucking has a protrusion on the inside that fits in that window. That's why he had to lift the bucking while installing it (the part when he said it stopped sliding on). Once cause of shooting left or right is the barrel being installed slightly off canter (rotated, not perfectly vertical).
Sorry this is a little late of a reply but basically the pro has more tuneable and has a bb catch so no bbs fall at out when taking a mag out and no there is no issues with it in a g&g body a recommend the new Cnc maxx me pro hopup, yes it's $80 but it is the best top tier hopup you can get on the market
The greatest cr@p unit, I have only issues with one of these, so bad that I purchased a ZCI plastic one to replace it. Looks and paint don't make it a good product.
it depends on your fps. most fields are 1.5 joules and if you are shooting that or under that go with the 60 degree if you are shooting less then that go with the 50 degree and if you are shooting more then that go with the 70 degree. its fps based
Crazy people talk trash about maxx hop units. "I can get a ZCI for $10 and it does the same thing" First off, no it does not. Second, it is $40.... SO spend $10-$30 more and get an infinitely better part, no brainer.
Why exactly is this the best hop up though? To me it doesn't look like something special, its just a metal overpriced hop up, it doesn't even have clicks in the rotary so that they stay in place, I don't think this thing deserves 70$
You explained this and showed us how to install all that very good, thank you so much and please keep making videos
This was incredibly helpful for me, thank you. I have some amendments to make.
like the detail on installing a barrel as general information. Wish you went into the nub install
I finally found a good video explaining how to do it in max model .
Thanks man 😊
If you are new to airsoft you do not need this hop unit. A g&g or zci rotary are great units for cheap
G&G are 👌
Too late I already bought one and a new motor and a 13:1 gear ratio.
I bought it because I'm playing in a few weeks and this was the only decent thing I found on amazon, (accidently broke my c clip on the current one)
@@tmellor7797 I broke mine so maxx it is then
Being a machinist myself all i can say is...
That tickles the pickle 😍
I've watched many of your videos now and really impressed with the in-depth content, knowledge and honesty about the products you use, I'm also quite surprised you don't have more subs! Keep up the excellent content :-D I'm sub'd!
Aww thanks man, I will start more uploads again soon, as im on vacation atm.
It means alot to me that people that watch my channel likes it, that is for me more important than amount of subs.
And thanks again ❤️
@@reflexairsoft4648 Sounds good to me, will keep an eye out, Just watched one of your videos from last year, working in that sector, I hope you are still in remission from cancer. Have a great break! :-D
Thank you man, and thank you for the difference you make.
Regarding the amount of subs, I Think its Down to me not spamming every other page with my stuff, I like to Think my subs are more “organic” and invested 😊
Thank you!!!
I use a MP5 but the 2 side pods on this thing that locks it in place on the M4's blocks it from going in. Should i mod in some grooves in the alluminum seat of the hop up or should i grind off the 2 flaps on the hop up? The hop up locks in place inside the magqwell anyway since it sits inside a circular tube so it can move anyway. And cant i change the nozzle size of the gearbox to fit this hop-up if its to long?
Hey
I see that your BB go right through the barrel after you did the installation. I have issues with this and the BB won’t enter the barrel easily after installation. Any idea on what what could be the issue? I use a green G&G rubber and a 6,03 Madbull inner barrel.
hey i installed the hopup recently and it shoots amazing but the first couple shots maybe 20 or 30 of a full mag just drop but after that it works fine. like it doesn't shoot well when the mag is completely full any advice or thoughts on how to fix it
I'm new to airsoft tinkering. Was looking at one of these but the ics split gear box would not work with this, right?
Hi, do you know any place where its possible to buy only the flat lever? I bought this unit second-hand and i only got the classic rounded lever but i wanted to use r-hop so i sanded it down. I dont have any special tools so i did it by hand and its not precise enough. I would like to get the flat end lever that normally comes with the unit but i dont want to have to buy a whole new unit.
Which Mable leaf bucking would work best with the maxx hop up
and polar star jack 360mm barrel length
Do you have any recommendations to upgrade the hopup or possibly r-hop the tokyo marui mws gbbr?
In one of your videos you mention sanding one of the aluminum nubs flat and you had really good results. Is there any way you could elaborate on your results and the differencing in flight you saw compared to keeping the original curved shape of the aluminum nub. Would the 2021 Mr. Hop perform well with a sanded flat aluminum nub? Thank you for your thoughts.
The flat mod is only for flathop style bucking, but yes Can Make a vid about it 👍
@@reflexairsoft4648 Awesome! I'm looking forward to the video.
So I can just use the smaller metal r hop nub and flat arm for flat hop and it will be excellent?
Just a thought: how about naming the product in the title, or description?
What type of barel is that? Does the barrel really matter? Or can i just use my stock barrel ?
plz come back
I am having an issue where the installed bucking doesn't hold the BB. BB just rolls right through it. What am i doing wrong?
just ordered this. I have the same bucking as well. You used the flat hopup arm with it right? Does that one come preinstalled?
I use the standard aluminium nub that comes preinstalled, that works really great with this bucking
I get such mixed results with this hopup , it works great in my friends stock krytac and nothing else , my guess is the nozzle length cause it doesnt feed 3 different kytheras and every aeg I own and it only runs in that krytac ... but stock vfc and krytac run in everything...
Yea usually MAXX doesn’t like working with other parts but if you get MAXX parts they work really good together
Good explanation of how to. But, I would like to see a part 2 on showing how and why the hop up can or is an improvement as you do a test fire and compare other hop up units with it. imo Otherwise your praising a product without any tangible results.
Agree
Hi mate, I love your videos, I just watch all of them in 2 days. You are amazing! I want to change my hop unit. Want to go for:
Maxx me sport
Bc Prometheus 6.05 275.5mm
Mr hop 60
My doubt is for the improvement. In Italy the joules limit is 1.
I have a ghost m erm by evolution not custom.
I want to use it with 0.25 or at least 0.28 bbs.
Do you think I’m doing a good upgrade? Thank you so much for your channel.
That sounds good I’d flat or h hop it and stick a 6.03 or 01 mm inner barrel instead for improved accuracy and fps
Very nice guide! I m kinda a begginer so, is this hop up unit using what is called a r-hop ? If this is a stupid question i m sorry :))
Not on this one no basically a r-hop helps the bb travel further without adjusting the hopup a bunch(Sorry about the late comment
Does the maxx cnc m4p pro have issues feeding with some standard nozzles? I have the m4p and once installed it isn’t feeding the bb into the barrel I’m using a maple leaf tightbore 6.02 and a mapleleaf super macron 60 degree bucking
Did you figure this out as I have the same issue?
Is this hop up unit good for flat hopping?
How big is lancer tactical nozzles
quick question, what if my bucking lips are protruding too much into the hop up chamber? do i sand the lips down? im not sure what to do
Depends, first test if the bb Can pass the lips and go into the barrel somewhat easy, if you need Force to push it through then the barrel to hopunit and bucking is not a good match. If it goes through easy, the yes sand a little off the lips, install and test, still not good, sand alittle more and test
@@reflexairsoft4648 thanks, i sanded the bucking lips just a tad and it seems to have worked out good
Great to hear 👍 good job
It comes with instructions right? Thinking of getting the LED one
Yes it does, the led version comes with that as well
Can you do a video on how to change the hopup nub
Hey man, thanks for the video. I have a couple of questions if I may. I just bought CYMA SR25 and I was thinking of a few upgrades, but have a few questions.
1. These units should fit the SR25 right, no only AR15?
2. Dont these maple leaf buckings have some extra line also in the other direction that fits only maple leaf barrels? Like... 1 line is to slide on the barrel, and the second on is horizontal.
3. So with these metal pieces I wouldnt even need to order maple leaf omega nub if I get it right? Because it already has that shape?
Thank you man.
Hey man thanks alot.
1: If you have seen my gun collection vid, i have a sr25 by cyma(cm.072) with the maxx Unit, fits no problem.
2: correct, the new ml barrels have a Line to fit the line in the mr.hop but the bucking will work on barrels without this line, no problem.
3: correct I never use omegas with the maxx unit, i only use the original installer aluminium nub. I use omega in other hop units.
@@reflexairsoft4648 Hey, sorry for a late reply and thank you very much for answer :)
And I have a few questions again, hope you dont mind :D
So it should also fit the CM.098 version of SR, due to its extended gearbox? Because that is the one I have.
With this you mean even if I buy prometheus barrel and get mr hop I could do that? Like.. wouldnt that extra line push the bucking up and be non even on there, if you know what I mean?
And one more question, which of the ml bucking is the best? I believe they all have a different sized contact patch?
Thanks again.
Sorry for the late reply aswell, I dont get notifikations on this.
The sr25 cm098 does have a different hop Unit than the standard m4 cyma, but it is still a normal m4 style Unit, so should be no problem
So yes if you see my new vid maple vs maple, you will see i use MR hop on a normal Prometheus barrel, so the ring cause no problem.
But the hop Unit in your cyma is very good, do not change it, change the bucking and nub instead
As for the maple leaf buckings best to worst:
Mr hop 2021
Mr hop
Super macron
Monster
Macron
@@reflexairsoft4648 Hey hey, thanks for the reply again.
I have just placed an order yesterday for the MAXX MODEL (blue edition from specna arms), LAMBDA barrel and mr hop 2021, before I got a chance to read from you that I should not even buy the MAXX, but here I am haha :D
Just...1 more question if I may. I read somewhere that I should have a nozzle length of 24,00 - 24,30 for MAXX + sr25 but the stock one is 25.00 for the CYMA one that I bought I believe. Do you know anything about that, will I have to change the nozzle too?
Sadly my c-clip snapped after the first install. But otherwise maxx units are the best you can get. Got one for my vfc scar h ssr
Im sorry to hear that, I had my c clip out of this Unit maybe 50-60 times, as this is my test unit still the original.
Where is your r hop patch on the hop window? Ive been told 50/50 that you absolutly need one or that you just need a good quality flat hop bucking. Honestly frustrating because my gun shoots to the left after 10 yards rn and i only use the flat hop promy purple bucking.
Hopefully you have it sorted by now but...
The maple bucking has a protrusion on the inside that fits in that window. That's why he had to lift the bucking while installing it (the part when he said it stopped sliding on).
Once cause of shooting left or right is the barrel being installed slightly off canter (rotated, not perfectly vertical).
do you still use a hop nub?
Is this available for the mp5?
What is the difference between the pro and sport model? Are there any feeding issues with various magazines? Any fitting issues with g&g models?
Sorry this is a little late of a reply but basically the pro has more tuneable and has a bb catch so no bbs fall at out when taking a mag out and no there is no issues with it in a g&g body a recommend the new Cnc maxx me pro hopup, yes it's $80 but it is the best top tier hopup you can get on the market
Maxx Hop up LED mod for PolarStar F2 FCUs?
Is this a video suggestion? 😄
@@reflexairsoft4648 it can be yes
U got any spare hopups lol?
The greatest cr@p unit, I have only issues with one of these, so bad that I purchased a ZCI plastic one to replace it. Looks and paint don't make it a good product.
Will this work on an arp9?
It will but the g&g hop Unit is plenty fine
What mr maple leaf bucking and nub are the best?
it depends on your fps. most fields are 1.5 joules and if you are shooting that or under that go with the 60 degree if you are shooting less then that go with the 50 degree and if you are shooting more then that go with the 70 degree. its fps based
@@trevorwellington1636 350 fps. And 400. What's that?
@@tytalent4117 the 60 degree bucking is 295-390 FPS the 70 degree is 360-460 FPS so either one will work it is up to you what ine you get
@@trevorwellington1636 thanks :) when are you going to make a vid lining up all the different bucking? And tell us whats the best?
quismas
Crazy people talk trash about maxx hop units. "I can get a ZCI for $10 and it does the same thing" First off, no it does not. Second, it is $40.... SO spend $10-$30 more and get an infinitely better part, no brainer.
A few of us at are local spot use maxx hop ups and ot 1 single issies with any of them had zero problems in mine :)
We’re hopup twins for having identical snowflakes 🤓
I have a m4A and my gun shoots lasers
are u danish? i smell accent
I am
First
lol, the WORST make of hop up
Why exactly is this the best hop up though? To me it doesn't look like something special, its just a metal overpriced hop up, it doesn't even have clicks in the rotary so that they stay in place, I don't think this thing deserves 70$
Plz do not get this hop up
Can I put it in a polarstar jack
good day any idea if the maxx hop up unit will work in a aps asr 114 spyder?