Відео

I don't think you can swap the sights but you might be able to mod them. There is no full auto option on these pistols as far as I know.

@@TacticalMagfed thank you I really appreciate the fast response and helpfulness I'ma give you a sub

@@Tylee-m5e No problem buddy, thanks for supporting the channel 👍

the blow back only resets the hammer, the trigger is heavier than I would like.

Hi, the Racals are not the easiest headset to use. It can be tricky to set them up, and they have some quirks when you have them modded to use with Beofeng radios. If you have the active noise cancelling on, it can cause some issues for other users on the net. I used to turn it off in-game when I would be transmitting, then turn it on for having conversations rather than removing them (which defeats the object of having it). I ended up getting the Earmor headset and PTT and it just works with the beofeng without any issues. The noise cancellation just limits any ambient noise above a set db level I don't think it cuts radio transmittions. I have never experienced coms cutting while wearing the headset. Having used both, I would recommend the earmor setup. Once I tried the Earmor setup I never went back to the Racals. Hope that helps 😎👍

This video is just for the paintball version. Thanks for watching 👍

gracias por mirar👍😎

Hi there, one of the questions I get asked the most about these pistols is "Can I take the slide off, similar to the real thing". I made this video to demonstrate that this is as close as it gets for these pistols. I advise at the end of the video, not to force it and remove the front pin if you have issues getting the slide off. I get your point, but most people will probably decide not to remove the slide once they see how much effort it takes. Thanks for watching 😎👍

Hi, the first edition was the limited edition that came in an original Glock case with the back straps. The second edition was the pistol only in a standard Umarex case. They have released a tan version, but I don't know if they changed the slide. Thanks for watching 👍😎

@@TacticalMagfed thank you!!

@@TacticalMagfedHi, can i also change backstraps on newer version? I have official glock backstraps home and they fit but i cannot put out the pin. I tried to put it hard as hard as i can but it just wont go out.

Hi there, you can get a PTT with an audio jack output, so in theory, it could be possible to wire them to connect to an audio jack. I doubt you could get 7.1 audio though. If you are looking for a military-style gaming headset with 7.1 check out the Razer Blackshark v2 x 👍😎

@TacticalMagfed is it mono or stereo audio i never found anything about that tho

Hi there, it's stereo audio 👍

Hi there, I'm not sure what you mean by engaged. Do you mean cocked but it won't fire when you pull the trigger? First, I would get the slide off and check if the hammer can operate freely. If you can't physically move it, something is mechanically wrong and may be broken. on the flip side if it moves without any tension and won't stay cocked back or has no spring tension that could be a sign of a fault\mechanical issue. There is an alloy bar that connects the trigger to the hammer mechanism if one or both ends are not seated properly you can get issues and the hammer will not activate. If the hammer can be cocked and fired with the slide removed, you will need to cock the hammer back before putting the slide back on. This sets the alloy bar on the hammer end and normally fixes hammer issues. If everything is jammed up and you can't pull the slide back or the trigger won't move at all, that could be a bigger issue that Umarex may need to help you with. Hope that helps 😎👍

Hi there I use a Baofeng UV-5R, check this video out for my radio setup ua-cam.com/video/62LRq08ivWo/v-deo.html hope that helps 😎👍

Hi there, I use arc rail adapters opsmen\earmor have there own version. Check out this video at the 12:30 chapter for my setup ua-cam.com/video/RMTp4DxwKfg/v-deo.html hope that helps 😎👍

Hi there, I'm not familiar with the 4.5mm pistols, but it sounds like you need to rebove the slide and install it with the hammer cocked. If you install the slide with the hammer forward (as if the trigger has been pulled) the slide\mechanism can't cock the hammer when you pull it back or it won't cock the pistol after you have shot a round. Hope that helps 😎👍

Is my firing pin broken ? cause when i insert my mag it cant totally inserted.

Hi there, it's possible. make sure you have cocked the slide back and that the hammer is not engaged. If the slide is not back the hammer could be pushing the firing pin forward, stopping the mag from inserting fully.

Hi there, the lanyard is an elasticated cord that is attached to your belt and then to the pistol. If you drop your pistol or it falls out of the holster you shouldn't lose it. Hope that helps 👍😎

Thanks for watching, glad you liked it 👍

Good to know, thanks for watching 😎👍

Awesome, glad it helped you out 😎👍

Thanks for the feedback 👍😎

Hi there, check this video out ua-cam.com/video/sfia6dplTL4/v-deo.html it should help with the red dot install 👍😎

Hi there, yeah not all rubber rounds are manufactured to the same standards. There looks to be a similar issue with sizing, if they are slightly larger they will pinch and affect the trigger pull. Thanks for watching 👍

Hi there, thanks for the information 👍

Hi there in terms of Comms they work great, no problems at all. In terms of noise reduction for flash bangs etc they are about 80% effective. Your ears are pushed against the side of the mask and are not in the ear cup of the headset so it's not 100% but it does reduce the noise. Hope that helps 😎👍

Thanks for the feedback 👍😎

Hi there, it's a mixture of gameplay and UA-cam creators. Check out trex arms, tactical cowboy and gbrs group. They breakdown drills and equipment for civilians. I don't have any military experience it's all larping around playing Magfed Paintball or Airsoft 😎👍

Hi there, I use a replica surefire x300 light and a blackhawk omnivore holster. I can use the same Holster with all my Umarex pistols, just by adding the x300. Hope that helps 😎👍

Hi there, Umarex mount the sights differently to the real Walther models. I don't think this would work for you on that model. You would need a gunsmith to CNC an insert or advise on a solution. Hope that helps 👍

Hi there, I prefer the high cut for paintball it is easier to get the helmet, mask and headset setup. I haven't used a mid or low cut version but it looks like the headset would need to be under the helmet and I haven't managed to get that to work with my setup. Thanks for watching 👍

Yeah, .43 cal is just about usable for cqb paintball. I use my first strike fsc for .68 paintball. Thanks for watching 😎👍

Lol. Cal 50. 😂 How small do you wanna have your mag? 4-5 rounds? 😂

@@daibo0ne - Fair point but I don't mind carrying a couple spare mags.

Awesome, I'm not sure about replacing the sights. I haven't tried replacing them yet.

@TacticalMagfed just tried, it's a Phillips vs the hex type on a oem glock front sight screw, so I thought just use the t4e screw with the glock night sight... diffrent threads, didn't want to force fir it

@@a.camden4631 that's a shame it would be awesome if the OEM parts fitted 👍

Awesome, can you post a link for anyone that might want to get one. Thanks for watching 👍

Thanks for the feedback buddy 👍

I don't think you can replace the slide, but I made a video on how to install an optic ua-cam.com/video/sfia6dplTL4/v-deo.html hope that helps 😎👍

Hi there, I'm still around 👍 it's been a strange year or so. I'm hoping to get my mojo back and get some video out over the summer 👍

I'm not sure the original v1 mags are being produced any longer. The v2's may be the only option you can buy new.

@@TacticalMagfed Right. I was just wondering if i should change up all my v1's to v2's. Thoughts?

@@scottd7615 hi there, if your v1's are working without any issues I wouldn't bother. If you have a full auto setup and need to increase your bps then v2's would be better. I love my v1 mags. Hope that helps 👍

Thank you. ​@@TacticalMagfed

Hi there, the rear sight should slide out. It's not screwed to the slide. Is it the paintball version of the pistol?

Hi there, have you checked out www.ukmagfed.com/ they have a list of sites that have magfed walkon days.

That's a tough one to answer. It used to be accepted that .43 cal pistols would chrono high. You can get the FPS down by firing of 10 shots or so. Some sites may still allow you to do this, but a recent event required and FPS of under 300 with a fresh co2. Some of the umarex pistols couldn't get under. There is no velocity adjustment on the umarex pistols, hope that helps 👍

Hi there, I'll take a look and see what I can do 😎👍

That sounds like a great install and setup 👍

Yeah, sorry about that 😁

Hi there, there is no off the shelf kit to fit a red dot on the PPQ. I had to modify the pistol to fit this one. The red dot I used isn't available anymore, but these are similar www.opticswarehouse.co.uk/vector-frenzy-1x20x28-rd-vt-red-dot-sight www.opticswarehouse.co.uk/vector-frenzy-1x26-aut-3-moa-rmr-red-dot-sight Hope that helps

Hi there, the original release of this pistol was a limited edition. The limited edition came in a genuine Glock case and had Glock back straps. After the initial limited edition release came the general release which came with a standard Umarex pistol case. In my video I had the limited edition, others may have had to wait for the standard version. Hope that helps 😎 👍

Hi, you need a sight\optic and a adaptor plate\mount. The one I use is a vector optics red dot sight (not an RMR) and a UTG Red Dot dovetail mount.

@@TacticalMagfed Thank you!

Can you please link this non RMR red dot sight.. their are so many... lol @@TacticalMagfed

Hi, this one will be OK www.opticswarehouse.co.uk/vector-frenzy-1x20x28-rd-vt-red-dot-sight

It sounds like it is not cycling the slide back to charge the hammer? Will it shoot a second shot if you manually rack the slide? If it will shoot after manually racking the slide the blowback valve could be damaged. There is a green rubber valve (see 09:40 in the video) on the inside of the slide, if it is torn or damaged it will stop the blowback action and the slide will not rack and set the hammer for another shot. Hope that helps 👍

Hi, The PPQ can be stripped for cleaning, but you need to remove the front pin to allow the slide to be taken off. (Hola, el PPQ se puede desmontar para limpiarlo, pero es necesario quitar el pasador frontal para poder quitar la diapositiva.)

Thanks for the feedback. I add chapters to the videos so viewers can skip to the end summary and avoid me waffling on 😎👍

Hi there, yeah this definately sucks. It doesn't make any sense to me that paintball is still using a flat FPS limit for all sizes of paintballs. The sport needs to take a more accurate measurment of Joules (power) similar to Airsoft. By taking into account the weight of the projectile (paintball) the FPS of an Umarex pistol would need to be 400+ FPS to match the same joules as a .68 cal paintball from a paintball pistol. I could take my FSC to a field and shoot FSR at 243 FPS and that would effectively have 2x the Joules that a .43 cal paintball from a Umarex would have but the umarex is banned? You can get the FPS to drop on the umarex pistols, but you have to shoot off about 2 mags worth of shots. I,m not sure you could get it as low as 243 FPS though. Without knowing the weight of the paintball, you will not know for certain if you are breaking the law even if you are at the site UKPSF limit. They are the govening body here in the UK so we will have to see what they tell the field operatorsvenues.

Hi there, thanks for supporting the channel. I'm happy to hear that my videos have helped you out. I try to put relevant content with as accurate detail as possible, but that isn't always picked up by UA-cam. It can be hard work producing these videos, thank you for your feedback it means a lot to know they help new players get into the sport 😎👍

True, I know that I would prefer to have a set of these Earmor/Opsmen headsets than have nothing at all 👍