Відео

On the Lamb's wool or even a 50/50 synthetic natural blend sleeve charge it up in water first then spin it out if you even have a roller spinner if not you know get creative with a wall or something it expands the fibers in the nap and holds more pain than delivers a better job.

As a homeowner learning how to paint, my main mistake when rolling used to be leaving too much on the wall and it would sag and look like ice cream. Eventually I realized if I backroll such that the roller made a hissing sound, it would take excess paint off the wall and give me a very light coat. Painting my own house, I'm OK if it takes 2-3 coats. I'd rather do another coat then have to sand down an overly thick coat. Maybe one day I'll be good enough to roll just the right amount of paint without hissing, but I'm not there yet and maybe never will figure that out.

Anyone for purdy colosseus covers?

So true never cover in one coat with a micro fiber

For those that are mad about this, would be very very surprised how many people that dont care about that or would even notice it. They dont think about it. They only care about how it looks when its down

Can you paint the vinyl door thermastrip?? If so what type of paint you recommend. Thanks

lol what a dumb ass!

Obviously paint is gonna come off eventually. That's just part of life. The wood will rot eventually, too. How long would you give soffit and eaves painted with basic cheap Zinser primer and then with the Behr opaque "stain." I have at least 50, if not 80% peeling paint on the shed I'm painting, and those are the products I chose. Do I need to go all the way back to wood, or just peel the junk off and plan on another fun summer day with the Ole paint roller in 5 years? Will I get more years out of stripping it down with the heat gun?

🤯 for a moment I thought I was watching a video in rebuilding my vw engine I recognize the voice 🙌🏽 great job Mike new subscriber now

Thank you for this extremely valuable information. Guys when someone with 30+ years experience is trying to help save you frustrations with spraying. Listen, utilize, and appreciate. Thanks again for your time and generosity.

Excelente video y muy bien explicando. Tengo un Vevor igual,he visto gente que lo limpia con amoniaco diluido en agua por el circuito, que le parece? Yo lo limpio con agua

Mike I kid you not, that thing is a work horse, people sleep on these pumps

I have a Graco X5. The same pump as this Vevor. I cannot believe how long it has lasted me. I kid you not I've done atleast 20 full exteriors. Stained an insane amount of fences for a bunch of duplexes back to back. Painted several boat docks, I've even sprayed several sets of cabinets, the entire exterior and interior of my personal house. It is still working like a charm. I truly can't believe it. I also run 75 ft of hose on it which the guy at Sherwin who sold it to me said was too much hose lol.

Too long of an explanation man!! Wasted my time and hardly learned anything

I like the same gun you like, i have used all of the guns there and the silver is the best.

Unfortunately i cant buy the flat tips in europe. Would have been great! Great mod.

paintsprayersunlimited.com/ if you want all these parts cheaper. it is a bit hard to navigate but they have all the parts I listed on amazon much cheaper.

It's marketing thing, distinguishing a dedicated cutting product, it's a top seller in home Depot here and Amazon too, so they were successful marketing to the DIYer, not some one in the trade. Is it better, you can hold a regular brush the same way, the next lowest common denominator is the bristles themselves, which is down to manufacture. My curiosity got ticking and thinking about myself, the target audience, I spent most of my life using cheaper brushes, therefore be impressed. Some team out there sat down and thought the entire timeline through 🫡

Those two red cans are Chinese garbage. The welded seams are not recessed and protected and the spot welds on the handles will not hold up.

No thank you man, dont come close to my garage door

Wish they would say which paint and colour this is!

i just used Benjamin Moore here in the Phoenix area and the customer service was A1 and the paint covered and went on with ease and looks better than any other paint I’ve ever used and looks stunning ! i really love your videos !

Is there any recommendation for filling in holes on fascia boards prior to priming and paint? Is there such a thing as exterior filler or spackle?

I recently cut about 800 square ft of walls with a corona 3 inch straight wall brush in a reno situation. In theory the bigger wall brush holds more paint, so you can move quicker, but you also need a quality bristle to get into the inside corner.

Waist of money, this is junk

The best cans are Wavian/Valpro from Latvia or Gelg from Poland the have a "V" or a "G" stamped on the side. A quality can will last for a lifetime. I have a original Wehrmacht can stamped 1940 for my Volkswagen Beetle. The rubber seals should be changed if they get hard.

a youtuber that goes on cam now to complain on cam...;. isn't that what wives are for? get a grip man your on cam

Have you seen a demo of the Graco XT series machines? Graco claims that with the new pressure control on the XT combined with the Quick Shot gun it eliminates over spray.

Yes, we know, it's not a professional painter! If I took a shot of whiskey every time you say that this video, I'd be drunk!

17 minutes later, halfway through the video, and all you've done is hook up a hose.

You spent most of the first 10 minutes complaining about it. I wish you would just focus on why we came to this video, how to use it.

Really appreciate your review. Do you know if Graco tips fit the Vevor guns?

Thanks

Has this been an effective solution?

thank G-d for you man. thanks for the veteran sprayer wisdom. saved me hours of second guessing.

Me too

Brilliant unit! love my T5!

The new titans aren't holding up like the old ones. I'll soon be switching over to Graco.

What pressure exterior? Dainty open spray

Hi Mike, long time subscriber here. Is a flat tip good for SW loxon paint? Loxon spec sheet calls for .21 tip. Tys.

Id be alot more impressed if he could do that with 200 hours on it and the corresponding paint rainbow attached. Still, some good ideas there.

Which sprayer ?

Hi there,Im about to paint a big rough stucco house,the stucco has color but never been painted, planning to use problock from sherwin-williams and Duration flat for finish,would you recommend an elastomeric paint or primer instead? House is in the dessert so there's windy and hot weather conditions

As a 40 yr in the game Painter I agree 100% with this.

I like the color! Would you tell me the name of the paint color…?

Audio no banjo

before the cut to the pump body with old pking removed, looks like there are 2 in the hole

Great job, painting a house with that must be really difficult.

Pretty quiet on this video, Mike. The audio quality is on point and when I jack the volume up it's crystal. Appreciate the oldschool tips, i'm in my second year as a business owner as a painter. Willing to always learn new things. I do think i'll stick with the reversable tips simply because the availability is just there, but when I have a few extra bucks i'm going to setup one of my gun only for flat tips. I'm learning how to be cost efficient. I'm a solo venture most day and hearing your words of encouragement of just losing the masker and touching up with a brush later is something I needed to hear. When I do price heavy it's usually on things that require a lot of physical man hours, like scraping, sanding, priming and caulking. Which seams to be a lot of houses these day. Figuring out how to keep the price low on that as well, too.

Staying true to the flat tip eh , they never have any 517 flats at the store and they just laugh when I ask for them