Відео

They are killing it, definitely innovating 🙌🏻 they have more goodies coming soon 🤯🤫

I have seen the black ones but on other peoples rigs not sure of those were the real deal or replicas 🤷🏼‍♂️

🙌🏻🙌🏻 I got the black Simsonn pedals delivered yesterday to review. They do look amazing. I will be testing them next week 😊

Yes 🙌🏻 form Joburg

@@TheSimCircuit I could tell🙌🏿 You content is amazing💯

@@mlondipraiseworth3223thanks man 🙌🏻 it’s much appreciated & thank you for watching 👍🏻

Thanks man 🙌🏻 yes I’m South Africa those pedals are great for the money. I actually had the Simsonn pro pedals delivered today that’s also from Ali Express. Will start reviewing them next week 🙌🏻

Thanks matey that’s useful info. Going to give it a try see if I can get I a little better 🙌🏻

Looks worse than what it is 😂 thanks for watching matey 🙌🏻

Hey matey yes you can I do that with the lmp3 or Porsche, in simhub switch on wheel lock. You can even pick if you just want to know if rear or fronts lock up

@@TheSimCircuit unreal thanks. I’ve ordered 1 for my brake.

@@red2lucasworth it 100%

Hey matey thanks for watching, I owned the club sport v3 pedals both normal and inverted for a long time and I would say the p1000 are a nice upgrade from them. I don’t have experience with the SRP pedals so can’t make a comparison to them unfortunately.

@@TheSimCircuit I see, thank you very much, i like to know what you say about P1000. Cheers!!

They are great pedals matey. But once fully upgraded you can buy better pedals for the money spent. I personally if I had a choice again would buy the p2000 by SiMagic those offer allot for the money. But you will be happy I’m sure does not matter which one you pick 👍🏻

I have seen seen SiMagic on Ali Express also but I can’t confirm that they are 100% legit I will find out and let you know.

Hey matey I have word back directly from SiMagic and they don’t sell anything on Ali Ecpress and don’t have a partner or retailer that sells on Ali Express on their behalf. So I would avoid the SiMagic stuff on Ali. Here is link they provided to their approved retailers. en.simagic.com/experience?typ=0

@@TheSimCircuit Ahhhhh, cheers for replying, I ordered legit ones and received them last Wednesday. Amazing pedals.

@@nathancadgreat 🙌🏻 hope they bring you hours of fun & loads of wins 🤩

At the time of buying my p1000 the haptics were only available for the p1000 only few months later they released the p2000 module to make shakers work on the p2000 and other pedals. But yea if you have funds and are planning on adding all the bits on to the p1000 then I agree it’s better buying the P2000 then 👍🏻

😂😂😂 sort of. The p1000 are fantastic pedals if you are wanting to upgrade but what I am showing here is that you don’t need to buy other pedals you can fit these to your current pedals 🙌🏻 I don’t have any experience with the CSL v2 pedals so I won’t be giving advice on them but I have heard good things about them 👍🏻

@@TheSimCircuit yeah what I said above seems like the smart thing to do. The CSL V2 are the best bang for your buck pedal on the market according to many. Looks like I can have best of both worlds. Save 500 and still have fantastic pedals with haptic brake feel

@@TheDoctor46vr go for it ☺️ enough left to maybe start looking at another wheel also 😜

Oh you don’t feel anything matey, load cell pedals are amazing as you learn how hard to push down on the pedal instead of focusing on the travel of the pedals but they give no feedback as to what happens on the sim/game so for that you need a transducer or shaker 🙌🏻

Thanks mate 🙌🏻

Yesss you gona be well happy matey of that I’m certain. I have also recently started SiMagic more seriously they have been innovating 🙌🏻

They can be fitted to the pedals but I have not seen anyone run them on PS5 as of yet

@@TheSimCircuit 👍👍ty

😂😂 no not sponsored but they were the first company to send me some gear so that was much appreciated especially being a small channel 🙌🏻 this GT Neo I bought myself thou and would say it was money well spent 😉 it’s still going with no issues. Thanks for watching matey 🙌🏻

@@TheSimCircuit was a joke lol. I love this vid bc I've recommended the gt neo to many ppl and have been wary a lot about its durability after Jardier's one broken down. Seems like the production version is sturdy enough.

@@haid1449 don’t stress matey I know u were joking but I do think SiMagic should sponsor a few bits 😂 would love to put their Alpha base up against my Simucube and Invicta but I can’t be buying more direct drives just to make a review 😝🤦🏼‍♂️ but I have been itching, I know they planing on bringing another 2 wheels to market that would accompany the GT Neo so look forward to seeing those 🤩

Strange, it’s hard to tell without seeing matey. What you can do is message me on FB or email me the photos of your settings and I can compare to mine.

@@TheSimCircuit what is email address?

🙌🏻 yes, from Jozi

Hi matey thanks for watching, the cable is very long but I coil I round the qr and it’s ok. I will be getting QR from GSI with the short internal cable just to make it look more tidy. I did not once have a single disconnect. I do run on low power mode yes but even then for me screen and rgb bright enough. I would say GSI brightness setting is much brighter than other companies wheels brightness setting ( too bright ). I use it every week on my Invicta base with no issues so go ahead and get the FPEv2 if you want it’s an amazing wheel 🙌🏻

@@TheSimCircuit Thanks for the answer man, but I think I will wait to see if GSI releases a proper QR with proper and full compatibility with Asetek QR not like now, in fact in their own web page GSI states this wheel is not compatible now with Asetek, I am pretty sure because of this issue till they solve it, I think honestly this is a pretty important information to be clarified in the video, mainly to avoid confusion. The issue with the long cable is not it takes too much space or similar, is that when connected to the QR it increases even more the already long electrical connexion, making it so long that it causes a significative fall of voltage in the cable, adding this to the lack of enough power of the Asetek QR itself, all this apparently in some cases reduces too much the voltaje and this could cause losses of connection like reported for some users, I guess you are lucky till now then. Thanks

@@papolo2001yea I must be lucky 🍀 😅 i don’t race for hours and hours at a time but my sessions are normally 2 hours long with practice and races and I don’t have any issues whatsoever. I put my FPEv2 on my Asetek base and after 3 seconds the screen and rgbs come on, as easy as that 🤷🏼‍♂️ yes I run on low power mode so rgb and screen not super bright but it’s plenty bright for me. Probably a good 100 hours plus on that wheel now and still my favourite 🤩

Hey matey, you will need to download SimHub it is the single best piece of software for sim racing it can control almost everything. Then download the pacelogic file I have link to in this description to use with SimHub software. Link your phone and pick what dash board you want to show on your phone 🙌🏻

Haptics definitely makes a huge improvement on the driving experience 🙌🏻 I’m also glad to see them getting popular and more easy to use and implement 👍🏻thank you for watching 😃

I normally don’t run simpro when I was using SimHub but yes I believe if both simhub and simpro is open it will use simhub over simpro. I will go and look tonight and make test to confirm this and get back to you 👍🏻

I run Manager so rev lights work on the rim.

They are very good know that but not sure if better yet I am doing tests with other transducers will make a video in the future 👍🏻

Thank you matey 🙌🏻🙌🏻

Mmmm did not even realise that 🤔 one thing you can do in SiMagics own software Simpro will be little annoying running simhub and simpro but it will work that way 👍🏻

I like the smoother feel but even at setting 6 these are very light, would have loved just a bit more resistance 🤔

@@TheSimCircuit Just pull throttle arm upwards on the throttle pedal itself and it will be much stiffer. Wright now it is in the lowest (softest) position on your setup.

😂😂🙌🏻 yes this is the perfect explanation

That’s why you only buy what you will actually use lol! Better than other companies that offer no add ons

At the time of me purchasing these the haptics were only available for the p1000’s and that’s what sold it for me on them over the p2000. I would love to try the p2000 but have not had the chance yet. Hoping the difference is not day and night 🤔

Hey matey thanks for watching I am not sure what you mean though? Are you referring to the QR that was not as solid on the Formula wheel? If that is what you are referring to Asetek sorted that very quickly I can’t remember ever having any other issues but then again I do have a head that’s like a sieve 🤦🏼‍♂️

@@TheSimCircuit I’m sorry I was t trying to be negative 😀 I was referring to the steering wobble that you got . I thought it was because the mount the wheel base was on, that’s why you had to change it to a simcore mount. I watched the previous review of this Asetek direct drive wheelbase. I enjoyed the comparison with the Simucube dd. Really good video. Plus the Asetek looks good on the simcore front mount , just the right amount of bling. Once again, I’m sorry my first comment on your video was negative to company I’ve grown to believe sells high end products and offer cutting edge technology

@@JiluMiah-ek2rdno sweat mate 😂 yes when Asetek first released their formula wheel the Quick Release was not gripping as tight as what it should have. But they sorted that very quickly and today their QR is my favourite. The front mount Asetek sells has play in it but nothing you notice wile driving. This simcore one is amazing and makes everything rock solid but cost allot for what its is 😉

Oh btw I did not take your comment like that at all I was just not certain what you were referring too. I am a very forgetful person on the best of days 😂

@@TheSimCircuit 🤣🤣😂 your a funny one, mate. Nothing wrong with being human!

😂 thanks for watching matey it’s much appreciated 🙌🏻

@@TheSimCircuit Thanks for the awesome content 😀

lol yes like I said any pedals see the link below 😉 cults3d.com/en/3d-model/gadget/simagic-p-hpr-haptic-pedal-reactor-mount-for-logitech-pedals-g923-g29-g920-g27-g

No mate, the throttle shaker maybe not as useful in iRacing but brake shaker very useful. I use brake for ABS, cars with no abs I set to wheel lockup 👍🏻

Tyre Breaker I like that 🔥 you are going to be very happy with that setup 🙌🏻 and thank you for watching matey 👍🏻

I have heard someone say they can work on ps5 but not seen or tried myself 🤷🏼‍♂️

Hey matey I have never used the Tlcm pedals before but from looking I would say the SimJack pro pedals would be the ones I would buy if those are my choices 👍🏻

I own both the sim jacks don't work with forza games or any windows store games for me and I still can't get the break right on the sim jacks after buying lots of elastomer to try get it right .I would get the tlc m if I did it again

Yes I understand it’s pushing and pulling that puts the most strain on the wheel. I don’t really push or pull myself under braking but I do pull on my wheel getting out of the sim rig 🤦🏼‍♂️

Thanks for watching matey here is a link I found on Etsy for the Meca Evo pedals 😉 www.etsy.com/uk/listing/1612535818/