Відео

12mm motor shouldn’t be much of an issue TBH especially with the lower pitched lighter Gemfan props. Happymodel used a 5a 2G4 AIO for their Crux 3 on 1202.5 motors. I wouldn’t really want to run the 13mm on 5a, especially a diamond board… but it PROBABLY wouldn’t explode ..

@@MoeFPV yeah I killed esc in crux1s+ws, I guess gyro was trying to compensate after bump or smth, are you sure its 5a? I know spec says that but its x12 board wich should be 12a? Do you think betafpv cross will do as a repacment?

@@h8er137 well there are two crux 3s I should have been more specific. The Crux3 1s ELRS is a 5a board, the discontinued 2G4. The 2s Crux3 uses the X12 board as its 12a and suitable for 2s. Beta makes a toothpick board - I would use that over the cross, TBH

@@MoeFPV yeye Im talking about 1s, great with ws (thank you), anyways even mobula 7 had 12a, seems odd to fit 5a in crux.

It should serve as a warning than the pilot should land soon. If it gets even lower you’ll see LAND NOW. But these warnings can be adjusted to pop up at different battery levels. This warning was default and was too high

@@MoeFPV sorry Moe, I was joking as you had it up on screen the whole time lol. Lucky its not an 03 and just browns out on low volt

Ty very much !

Not enough, is what I've seen so far from other people as well.

What’s up Tux! This flight ended up being 2:20 for me with a recovery to 3.5 BARELY .. the most I’ll get is about 2:30 if I’m not pushing it. IDK what is normal or what to expect on 65. For freestyle flying though I don’t much mind it - I just charge a lot of batteries 😆

@@MoeFPV thats on the low side but reasonable for those motors and how hard you fly.

The new mob6 2024 frame is very resilient - so is this new cockroach V3 frame. Stiffness doesn’t always equate to resiliency in the WHOOP world

When we flying WHOOPS

2G4 from happymodel , HQ ultralight props, tinywhoop pinch cam , NewBeeDrone cockroach v3

Are you asking what is the best FPV system for penetration? What type of flying will you be doing ?

@@MoeFPV yes. I'm just starting out learning about this stuff, not actually flying anyone right now but I'm trying to learn the pros and cons of different setups.

This is the FAT PINCH cam from tinywhoop - not sure if they’re making them anymore though as it’s based off the discounted pico razer :(

This version IS the one with the naked 03 - do you mean if you bought just the frame kit? Either way, you can just apply the specific CLI from flywoos website for the version you build - in this case, if you bought the frame kit and installed the naked 03, you can just apply that CLI. Although I assume they didn’t change the tune between the regular 03 version and the naked 03

@@MoeFPV thanks man, i have just bought the pavo20 but the naked 03 doesnt fit insdie the mount does it. would you say the pavo20 even needs a naked 03 for better freestyle flights hence its 3s power? but yeah i am also thinking of buying the flylens85 as a cruiser/indoor flyer and putting the naked 03 in that or would you say im just wasting my money since i already have a small ducted drone? is the pavo20 good for everything that the flylens 85 naked would be? i know the flylens has less jello but thats not something im really bothered about tbh i just want a small woop that can be flown indoors for slow flights and also fast/freestyle flights do do you see any point in getting the flylens if i already have the pavo20?

Thank you!

I also find that my 1 cell batteries tend to need replacing at LEAST 2x as often as my 2s, but I don’t mind TBH. I love all the systems for their own strengths. And I did once try tri blade 3” props - just not for me on toothpicks. I like the floaty slippery feel of a bi blade 🤣 although I always assumed bi blades to be more efficient given the lighter weight/resistance of 1 less blade

@@MoeFPV sorry to bother you once again, I have some questions about walksnail - I currently use hdzero, and I like to fly both relaxed and hard/fast, almost all flights are in small/tight spaces (around my house, like you do). 2.5inch 2s or I've just purchased a crux3 to try out the 1s scene as per your video. I'm curious whether you use hdzero or analog goggles with a walksnail vrx? whats the latency like with a vrx? I saw something about the hdmi output (conversion from walksnail to hdmi out) increases latency even more. Whats walksnail on a micro like with the latency in a small space? Its really expensive to purchase the whole walksnail setup just to test

@@xyic0re714 No bother at all - very good question. I think I wont be able to give you a good answer as latency perception/tolerance is different pilot to pilot. I can say you will probably feel it, if you primarily fly analog and HDZ. Will it be enough to ruin the experience for you? I want to say no. I really enjoy WS for what it is, and is amazing to fly on micro quads. Though I would say its best to try it, if you can, before purchasing. I have the walksnail goggles x - the VRX may have some minor additional latency depending on which goggle you are using it with. It really only works with the HDZ goggles or the new Skyzone 04X pros as they allow for the use of the low latency mode. All other goggles will have increased latency as you can not use that mode. I had the HDZ goggles and the VRX was a fine experience compared to the new goggles x.

@@MoeFPV Thanks, appreciate the in-depth info. I do have dji, but have transitioned into micros (I much prefer them given my flying locations, and I've found I prefer to create 'tracks' for myself to race. When I only had dji I didnt much notice the latency, but obviously I've been flying a lot of analog in recent times. How do you find the walksnail goggles x compared with the hdzeros, I really like the fit of the hdzeros (zero light leak), and I like the community focus of hdzero. for me fpv is a lot about tinkering/community.

I have another solution for 2” HD - another frame by the same designer called the BAT. video to release in a few weeks but do you have access to the 03 system? I haven’t built this quad up on vista - only walksnail. But the 03 Bat is by far the best digital experience on a true micro I’ve flown

Hell yeah ! Crux3 definitely a great quad. This is my all time favorite platform

The crux35 is definitely weaker when it comes to crashing - that frame just unfortunately can’t keep up with the hits. The crux35 is still one of the most insanely powerful quads/per weight I’ve flown

@@MoeFPVhad a few hits with the flyfish, strongly recommend this frame as a replacement. Somehow it also survived tyre water too after powering off…

You can just snip your current connectors off and solder up XT30 leads or you can purchase XT30 1s batteries

These are both custom builds so you’ll have to piece the parts together - unfortunately no link to a build