Another great video Moe, loving the horror intro mate 😮🤩🤩 Frames will be back on CNCDrones in the next few days but now with the added option of T700 Carbon 😁👍
I'm running through 1404 3800 T-motor on my 3.5" tri blade 4s setup and it just about maxed out what I can handle in my backyard. I need to get smaller batteries because I get over 7 min on my 850 batteries. I'm LOVING 4s.
Good to know about the battery Spec! I feel like the 1404s on a larger bi blade will be super efficient. I tried the 450 4s on my build and still got little over 3min - Crazy!
Nice overview of the build dude! Thing looks like a beast for sure. I’d need to turn it into a basher though with how and where I fly 😂 I think I saw someone resembling slenderman in the the darkness during the intro. You should watch out I hear he’s into FPV these days 😉
nice build, reminds me of my ULight 5 inch with 2004 1800 kV on 6s 650 GNB, have build 2 of them 1 analog and the other WS its awesome, the frame is called concept
1804 motors 3400kv are perfect for this on 4s. I dont recommend the 1604 with 3800kv on 4s. Too much kv, unless you want to run motor output limit. There you would need to get the 2850kv 1604 for 4s and that is pretty low more for like long range. 1404 is only for Bi blade and long range. Anyway 4" is my go to size. I got 1804 3500kv and there you need 750mah batteries for the power requirement. Maybe the iflight 1505 3100kv are perfect for a lighter more efficient 4s basher. Anyway, for those out there looking for a bnf the rekon 4 fr is very simiar.
Really good video ! I believe 4 inch is the best sub250 because you can bring it to the limit of 250 g ... Because 4S 650 mAh is about 10 grams heavier than 550 mAh I think the weight with the thumb pro V2 and 650 mAh is about 234 g ?
Thanks Sugalime! Agreed about your 250 statement, as well. My build was not really close to how light this build could go with maybe some 1404s and some better hardware choices. Also, the lighter we go, the more durable we can expect the platform to be! thanks for dropping by : )
Another great video Moe, loving the horror intro mate 😮🤩🤩 Frames will be back on CNCDrones in the next few days but now with the added option of T700 Carbon 😁👍
Thank you, Phil - and great to hear of the updated carbon choices!
LOVED the horror intro! And and chapter titles are a nice touch 😉
Thank you, Mr. Meaty!!
Red rum confirmed!!!
😮Omg that intro was epic👏👏good video mate definitely now I need one like this,that carnage looks great and flight awesome well done🔥
Thanks Fer : )
Great introduction to the 4in. class
Thank you very much!
I built the carnage 3.5 and I love it for sure my favorite
Man, you've got some fresh creativity going on here. Great video!
thank you very much!
Damn!
❤❤my dude!.. just binging your vids.. gotta catchup
You are brave
Yeah 4in are slept on and 3.5in is a really good size for beginners and seasoned vets
Jesus Mate 😮. I have chillllzzzz
👻 thank you!
Nice screamer)
Thank you : )
Straight up skills💥💥💪
The Nick burns 🔥 voice was creepy af
awesome video brother!!! Love the intro. I might need to make a wall for sub250gfpv frames drone 🤣🤣
Thank you LLAMAS!!
I'm running through 1404 3800 T-motor on my 3.5" tri blade 4s setup and it just about maxed out what I can handle in my backyard. I need to get smaller batteries because I get over 7 min on my 850 batteries.
I'm LOVING 4s.
Good to know about the battery Spec! I feel like the 1404s on a larger bi blade will be super efficient. I tried the 450 4s on my build and still got little over 3min - Crazy!
Nice overview of the build dude! Thing looks like a beast for sure. I’d need to turn it into a basher though with how and where I fly 😂
I think I saw someone resembling slenderman in the the darkness during the intro. You should watch out I hear he’s into FPV these days 😉
👀👀
nice build, reminds me of my ULight 5 inch with 2004 1800 kV on 6s 650 GNB, have build 2 of them 1 analog and the other WS its awesome, the frame is called concept
I wan t to try a 5 light next! must be insane
Looks kinda like a 4 inch toothpick in a good way. With big motors it probably flies like one too.
Feels like one, too! The lower weight and the BEEF motors make it respond on a dime. I just love that feeling in flight
1804 motors 3400kv are perfect for this on 4s.
I dont recommend the 1604 with 3800kv on 4s. Too much kv, unless you want to run motor output limit. There you would need to get the 2850kv 1604 for 4s and that is pretty low more for like long range.
1404 is only for Bi blade and long range.
Anyway 4" is my go to size.
I got 1804 3500kv and there you need 750mah batteries for the power requirement.
Maybe the iflight 1505 3100kv are perfect for a lighter more efficient 4s basher.
Anyway, for those out there looking for a bnf the rekon 4 fr is very simiar.
Thank you for the info, Chris! I do want to experiment with the 1404s on tri blades - have you tried to run that platform on a freestyle spec?
Really good video ! I believe 4 inch is the best sub250 because you can bring it to the limit of 250 g ... Because 4S 650 mAh is about 10 grams heavier than 550 mAh I think the weight with the thumb pro V2 and 650 mAh is about 234 g ?
With Titanium mod and some battery from the future you can fly this thing @ 249 grams with a 4S 850.
Thanks Sugalime! Agreed about your 250 statement, as well. My build was not really close to how light this build could go with maybe some 1404s and some better hardware choices. Also, the lighter we go, the more durable we can expect the platform to be! thanks for dropping by : )
I'm running 1404 3600kv and she rockets along
3mm or 4mm thick frame?
You can pick which thickness youd like for the bottom plate - either 3 or 4mm. This one is built up on a 3mm bottom plate