Bob's O Gauge Trains
Bob's O Gauge Trains
  • 80
  • 146 710
"New Engine Review": Atlas F40PH in NJT
Atlas O has always been top of their game. They come with quality, variety, affordable models. The Atlas woodside reefers may be the best fright car ever produced by any manufacturer. Their quality is unmatched.
Awhile back they acquired tooling for some locomotives from MTH. Here is the first one that I chose to add to my fleet. The New Jersey Transit F40PH. For personal reasons this engine along with sister engine #4129 hold a special spot.
Back in the 1990's as most of you know I was engine crew on Chesapeake and Ohio #614 for six years. We traveled from Hoboken NJ to Port Jervis NY which is about 87 miles one way. What makes the new Atlas release special? There were 2 protection diesels than ran about a mile ahead of us. NJT #4116 and #4129. So it adds to the memory of my experience with 614.
Sit back and enjoy this fine locomotive from Atlas. The details are superb. It comes with Protosound 3 and I am able to run it with DCS. For the first time in 30 years C&O 614 is re-united with NJT #4116.
All post production editing done by Sam's O Gauge trains
Visit his youtube channel at
ua-cam.com/channels/yh1.html
Переглядів: 1 730

Відео

Layout update and run session!!
Переглядів 2,6 тис.Рік тому
With spring around the corner I figured it was time to make some layout changes, clean up and move around. I re-arranged my display shelves, and changed the layout scene a bit. I also finally painted the back wall below the table line. And saved some time to run trains. I have added some Pittsburgh stuff. Although Im originally from Johnstown Pa Pittsburgh is only an hour and 15 minutes away. R...
Track Cleaning and Maintenance of Way to keep your railroad on time!!
Переглядів 1,2 тис.Рік тому
Hey everyone in this video we take a look at some track cleaning suggestions to keep your track running smooth and your railroad on time! There are several different ways to clean track both manually and with the aid of track cleaning cars. I personally do both. The track cleaning cars I use are from Northeast trains. They are nicely made and detailed and really work good as well. Then we go to...
Bob's wiring tips and tricks
Переглядів 11 тис.Рік тому
This video is dedicated to a good friend from far away. A subscriber and friend Dennis from England requested a wiring video as a suggestion for ideas. This will be a two part video with a basic overview on some options on wiring. In this video we go through a basic introduction into wiring your layout. Although we have to basically wire 3 rail o gauge the same there is room for "tweaking" to a...
Train Club Visit!! The Bull Creek Railroad!!
Переглядів 879Рік тому
In the week in between Christmas and New Years I was invited by fellow # Rail Lounge member and good friend J's o scale to visit their club layout. So I headed out to western Pennsylvania near Pittsburg to visit the Bull Creek Railroad Club. I spent nearly 2 days there. We went Hobby shop hopping, grabing a bite to eat and lots of trains. Bull Creek has 3 different gauges with the biggest being...
Bob's O Gauge "A year in review"
Переглядів 875Рік тому
First I hope everyone had a great holiday and Merry Christmas. Here we look at a year in review. Some of my new additions to the layout as well as update on the channel. I need to thank first Sam of Sams O Gauge trains for the help and work he has done for me this year. I could have never brought the fine stuff you have seen. Ive spoke with alot of folks via comments here. Early 2022 I met up w...
Merry Christmas Special from Bob's O Gauge
Переглядів 864Рік тому
With the holidays and Christmas days away its time to bring out those special trains. You know- the ones with that Christmas magic! I want to take this opportunity to wish all of you a very happy holiday and Merry Christmas! The two Rudolph trains start out pulling every Rudolph car ever issued from MTH, with the last coming actually last year; the flatcar and billboard. Then we go to the holid...
Tribute to "Sinclair Gas and Weaver Models"
Переглядів 1,4 тис.Рік тому
In todays model train worlds we have Lionel, MTH, Atlas and Third Rail with a few others. There was a great train manufacturer out of Northumberland Pa called Weaver models. They made some fine brass steam engines, diesel and rolling stock. They made alot of one of a kind rolling stock road names that were very well known and some regional- but all spectacular! Today we visit Weaver models and ...
The "New Evolution arrives with company"!
Переглядів 724Рік тому
I've had three GE ES44AC Evolutions for awhile; I got a fourth. You can never have too many. Along with that a pre-order voltmeter came as well; I ordered two of those. So I thing the train is up to around 26 various cars with 4 fully powered diesels. Im using a ZW and 14 gauge wire for every loop on my layout, I like big trains. But with big trains you need big power. I have fuses and circuit ...
MTH PRR Mikado "A Product Review"
Переглядів 3,5 тис.2 роки тому
Hey it finally came in! My pre-order of the MTH premiere mikado. It is in PRR and the USRA version. Pennsylvania railroad used both the USRA version as well as their own L-1 mikado. Although I do operate several railroads, my two favorite are PRR and C&O so anything from either sparks my interest. This model was well done from MTH, finely detailed. Sounds, looks and runs fantastic. It is the se...
Train Room tour with Lionel Bethlehem Steel
Переглядів 1,8 тис.2 роки тому
Over the past few months some folks have asked about this or that they have seen in various video's. In this video I answer a few questions and explain my history and show Bethlehem Steel in action. First we go to an operational antique telephone, then I have my Mom and Dads entire first living room set (rocking chair and couch plus end tables and coffee table). I have two very old hanging ligh...
MTH woodside passenger vs. Atlas woodside reefer You Choose
Переглядів 8092 роки тому
A short time ago I picked up one of the missing Atlas reefer's I have been looking for. The IGA food store's reefer. The quality of the car, the graphic's, the paint. Everything is the best in the business. So today they get pitted against eachother. The finest Woodside passenger's by MTH vs. the finest reefer's by Atlas; you choose. On one train double headed PRR E-6 Atlantics pulling 12 of th...
Reading T-1 #2102 leaving Port Clinton 10-29-22
Переглядів 1,5 тис.2 роки тому
Yesterday I had the pleasure of being on Reading #2102 for the trip From Port Clinton Pa to Jim Thorpe Pa. Mr. Andy Muller and his staff always put a show on you will never forget. When arriving in Thorpe a street festival await you for the afternoon before heading back. Here lead engineer Shane Frederickson slowly guides the 17 car UNASSISTED train out of Port Clinton. Unedited footage shows t...
An MTH Halloween special
Переглядів 6212 роки тому
With fall here and leaves changing in alot of the country fall foliage trips begin. Along with that comes pumpkins and that of course means Halloween is around the corner. The pumpkin carving, yard decoarting and kids trick or treating. That brings us a to special Halloween video brought by both myself and MTH Electric trains. The three ES44AC are all done up with the Halloween theme. Each frei...
C&O fires up to help the US Army
Переглядів 1,3 тис.2 роки тому
C&O fires up to help the US Army
"Dieselmania" MTH SD9 added to roster
Переглядів 1 тис.2 роки тому
"Dieselmania" MTH SD9 added to roster
Lionel Trains N&W GP 35 with Legacy!!
Переглядів 6902 роки тому
Lionel Trains N&W GP 35 with Legacy!!
Greenberg Show haul!!
Переглядів 8902 роки тому
Greenberg Show haul!!
Returning to "614" the finale
Переглядів 1,3 тис.2 роки тому
Returning to "614" the finale
Re-United with C&O #614
Переглядів 5 тис.2 роки тому
Re-United with C&O #614
Bob's O Gauge hits one year mark!!
Переглядів 4972 роки тому
Bob's O Gauge hits one year mark!!
Diesel Running session
Переглядів 3842 роки тому
Diesel Running session
Nite of Steam! Quadruple double headers-- 8 steamers!!
Переглядів 5682 роки тому
Nite of Steam! Quadruple double headers 8 steamers!!
Custom Coal loads from scratch Part 2
Переглядів 1,2 тис.2 роки тому
Custom Coal loads from scratch Part 2
Custom Coal loads from scratch Part 1
Переглядів 2,8 тис.2 роки тому
Custom Coal loads from scratch Part 1
Menards Lift Bridge... The Fix
Переглядів 2,5 тис.2 роки тому
Menards Lift Bridge... The Fix
Reading #2102 Rambles! My Excursion
Переглядів 4892 роки тому
Reading #2102 Rambles! My Excursion
The BIGGEST steam engine in my collection!!
Переглядів 7702 роки тому
The BIGGEST steam engine in my collection!!
The MU's move into town!
Переглядів 1,2 тис.2 роки тому
The MU's move into town!
"The little engine that could" AND DID!!
Переглядів 2,7 тис.2 роки тому
"The little engine that could" AND DID!!

КОМЕНТАРІ

  • @tommymartin4827
    @tommymartin4827 7 днів тому

    Hi Bob what do you think about Ross selling 614 and to be restored at Strasburg . Great news

  • @patricknoveski6409
    @patricknoveski6409 18 днів тому

    No matter what shape this engine is in, she wont last outside. What the heck? Build some protection around this beauty.😢 Same old story. No money to help keep equipment for future generations. This guy keeps saying the same thing over & over. Yeah yeah. Ross roland. Geez

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 днів тому

      Ross sold it and it is being restored at Strasburg.

  • @johnwilson6578
    @johnwilson6578 22 дні тому

    I am thinking about buying this bridge from Menards but I found out that it is made out of wood. Which has me concerned is it worth it. From the pictures you cannot tell it is made from wood. Plus how fragile is the bridge if a train derails and hit the bridge? Not to sure if it worth the money. Any feed back is welcome.

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 днів тому

      Its made of something similar to balsa wood. Its fairly strong, but I suppose breakage possible.

  • @robkrasinski6217
    @robkrasinski6217 26 днів тому

    I just saw something from Ross I believe that there is going to be an announcement soon and it looks like from the hints that 614 will be restored to operation again. As to where it will run, who knows until more details are made known. It's a picture of 614's number plate and a 97% bar on a black background meaning that the announcement is very soon. How old is Ross Rowland, anyway? He has to be in his 70's now.

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 днів тому

      I was with Ross twice last year. Yes it will be restored to operate.

  • @DominickCapolarello
    @DominickCapolarello 27 днів тому

    Bob is it possible to install the bridge on elevated tresels with fast track installation .. Also, is there any way to screw in the fast track ....your thoughts =.

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 днів тому

      The base is metal so i would imagine you would need to drill holes first. The bridge is similar to balsa wood

  • @fredashay
    @fredashay Місяць тому

    I need to do this but that patch cord is sold out everywhere! I also have a Lionel Base3 still in its box that I haven't opened yet, and I'd like to know how to connect DCS to the Base3. That's a beautiful layout you got, BTW!

    • @BobsOGaugeTrains
      @BobsOGaugeTrains Місяць тому

      If you have the power cord, base and cab remote. you will see a track connection screw on base. Run a wires from the base to the ground terminal of the track. Thats it, its easy. If you have multiple tracks run wire to all the grounds. you can daisy chain it.

    • @fredashay
      @fredashay Місяць тому

      @@BobsOGaugeTrains Okay. Thank you!

  • @Frank-wb811
    @Frank-wb811 Місяць тому

    Thanks for the video 😀

    • @BobsOGaugeTrains
      @BobsOGaugeTrains Місяць тому

      glad to hear you enjoyed it, this engine is a beast.

  • @EngineerEd-xt2qu
    @EngineerEd-xt2qu 3 місяці тому

    thanks for sharing your knowledge and like your layout alike. thanks for posting I did subscribe to you channel

    • @BobsOGaugeTrains
      @BobsOGaugeTrains Місяць тому

      Thank you Ed, Im glad you've enjoyed. I always try to keep something fresh or new on the layout.

  • @maxwellwalcher6420
    @maxwellwalcher6420 3 місяці тому

    WOuld C&O 614 be restored again once again.

    • @BobsOGaugeTrains
      @BobsOGaugeTrains Місяць тому

      I cant get into specifics at this point Max, but yep.

  • @BrianDickinson-x1c
    @BrianDickinson-x1c 3 місяці тому

    Thanks Bob for the "How To" coal Loads. Great job. I Have just one question though, what type of coal are you using and where do you get it in bulk if you can ? Thanks for your time and sharing.

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 3 місяці тому

      Hi Brian its called black beauty. Its used for sandblasting. you can find it at grainger and believe it or not amazon as well.

  • @railchief74
    @railchief74 4 місяці тому

    That’s a world record for the most synchronized Smoke units in operation on each locomotive

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 3 місяці тому

      thanks Mike. There are four there Ive had 6 steam=m at one point.

  • @jetsetter52
    @jetsetter52 4 місяці тому

    Wow…. Wow….wow…. I enjoyed your trains

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 3 місяці тому

      Thank You I always try to change it up with something new.

  • @jasonsecord1482
    @jasonsecord1482 4 місяці тому

    The best wiring video I have seen! Thank you.

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 3 місяці тому

      thank you Jason. Ive learned alot from the experts who have given me great information.

  • @KevinFarrell-z6y
    @KevinFarrell-z6y 4 місяці тому

    Beautiful

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 3 місяці тому

      Thank You, the GG1 is one of the most iconic engines in history.

  • @brianmoretti6480
    @brianmoretti6480 5 місяців тому

    Very cool

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 3 місяці тому

      Thanks Brian its the only tmcc engine I have but she is a beauty.

  • @Karen-zi3tl
    @Karen-zi3tl 6 місяців тому

    Just found this helpful video! Curious, at the end what gloss urethane spray are you using? I've only been able to find polyurethane gloss spray 🤷‍♀️, is there a difference? Thank u!

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 5 місяців тому

      Hey sorry for the delay, honestly I use super gloss just because I like the look. You can use semi gloss or statin as well. Its all about preference.

  • @horrorman9
    @horrorman9 6 місяців тому

    Definitely the woodside freight cars for me. I love the vintage advertisements of the day.

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 6 місяців тому

      I totally I agree I actually have the reefers on a train now, they are truley fantastic.

  • @jtbassgambler2594
    @jtbassgambler2594 6 місяців тому

    At first i thought that wss jesse ventura

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 6 місяців тому

      no im much more built than the body ever was lol

  • @duncanfoster6687
    @duncanfoster6687 8 місяців тому

    I bought this after watching your video. Beautiful!

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 7 місяців тому

      Glad you like it, I really enjoy mine alot. Real nice model of USRA mikado by MTH.

  • @MrStevesTrains
    @MrStevesTrains 8 місяців тому

    Holy Smoke 💨 you really love the EVO Engine. 😊 I admit it’s eye catching for sure. 👍🏻

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 7 місяців тому

      A ton of power and I wasnt sure how it was going to end up. But they did hit 120 mph without derailing. The loop they ran on was 0-80.

  • @MrStevesTrains
    @MrStevesTrains 8 місяців тому

    My favorite line right there. Chessie / C&O on the go!

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 7 місяців тому

      Thanks, i recently picked up the same paint scheme SD40 Chessie.

  • @MrStevesTrains
    @MrStevesTrains 8 місяців тому

    Can you control smoke volume on the Lionel switcher through the DCS remote?

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 місяців тому

      Unfortunately you cant regulate Lionel smoke volumn with DCS. You need Lionels remote for that.

    • @MrStevesTrains
      @MrStevesTrains 8 місяців тому

      Appreciate that bob. 👍🏻

  • @MrStevesTrains
    @MrStevesTrains 8 місяців тому

    Nice video, you explained it very well. 👍🏻

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 місяців тому

      Thanks I appreciate it, I try to make things easy to catch. All manufacturers always make it so difficult.

  • @tabomst3k851
    @tabomst3k851 8 місяців тому

    Probably one of the best train videos I've seen 😊

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 місяців тому

      Thanks glad you liked it, the GE EVO's are great engines

  • @johnnysager8899
    @johnnysager8899 8 місяців тому

    Do you run your leads off the first lock on ? Or separately to each lock on on a large layout?? Forgot to ask you with my first comment 😊

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 місяців тому

      Im using all four ports on the TIU since I have four mainlines. The two fixed channels you need to run command or protosounds two since they have fixed voltage. However the two variable channels you can bounce back to fixed or variable via the remote. Currently all four ports are running fixed.

    • @johnnysager8899
      @johnnysager8899 8 місяців тому

      @@BobsOGaugeTrains thank you 😊

  • @vader6972
    @vader6972 8 місяців тому

    what are you using for coal? is that black ballast or what? aquarium charcoal? nevermind. black beauty coal slag. got it

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 місяців тому

      yup no problem Vader, its black beauty coal slag. They use it for sandblasting in the commercial market.

  • @johnnysager8899
    @johnnysager8899 9 місяців тому

    Hello and I have a question regarding powering a large track? I'm looking at a track running through my yard and probably 200' in length and can you give me suggestions on the best way to power this size setup?? And if I can just add lock ons to the track to maintain equal power levels and what type of power supply would be used? Thank you from a newbie to the hobby. PS. I'll be running the lionel big boy and other lionel o gauge locomotives.. 😊

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 8 місяців тому

      Hi Johnny, as far as transformer power either a Lionel ZW or MTH Z4000 would be recommended. I would use 14 gauge wire since you are running a big loop. With roughly 200 ft of track I would would suggest minimum of 6 feeders . That would mean fresh power roughly every 35 feet. Stranded wire works best for our application. It sounds like your gonna have a fantastic setup. Is you have any other question you can always reach out. Let me know how you make out, your project sounds extremely interesting

    • @johnnysager8899
      @johnnysager8899 8 місяців тому

      @BobsOGaugeTrains thanks for replying and I will keep you updated with my progress on this project..

  • @driverman8615
    @driverman8615 9 місяців тому

    Really nice lay out by the way.

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 9 місяців тому

      Thank you, Im working on a layout update. It will be out soon. Alot has been improved.

  • @driverman8615
    @driverman8615 9 місяців тому

    Are you a steeler fan?? :)

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 9 місяців тому

      Big time Steelers fan. I was born in Johnstown Pa. Its like hour and 15 minutes from Pittsburgh.

  • @RobertFrei-q8k
    @RobertFrei-q8k 9 місяців тому

    hi bob thank you for your advice about how to properly wire a layout . i recently aquired a mth angus camelback its a real nice engine. well i only had 54 inch turns i had to upgrade the layout to 72 ,i also took out my older switches made the 72 independant of the other lines seem to be running real smooth have a great day. i have 1 question where can i get a pilot for a sd70 thax bob

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 9 місяців тому

      They only place is thru MTH parts for the pilot. If that doesn't work I can suggest an MTH tech that could order it and repair it. Thanks for the feedback. Im planing a big video real soon; the entire layout has been re done and I think looks great with more detail.

  • @NixCrossing
    @NixCrossing 9 місяців тому

    Fantastic video! I’m using those sounds in my upgraded k-Line Mikado

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 9 місяців тому

      thanks for watching, glad to hear you enjoyed it.

  • @gusrecto3952
    @gusrecto3952 9 місяців тому

    C&O 614 sure is a Beauty Sir Bob . it's the latest Steam Loco in my collection. All your Locomotives are beauties indeed. An awesome video Sir Bob 👍👍🚂

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 9 місяців тому

      Thanks Guss, hope sall is well your way. Yes indeed, I need to get back there hopefully this summer.

  • @Puddin_Pi
    @Puddin_Pi 9 місяців тому

    Atlas. I have the A&P car and I love love love it. Awesome details and it looks good with the mikado!

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 9 місяців тому

      I totally agree the Atlas reefers are the best freight car in the market. Thanks for checking them out.

  • @mr.shadestrains6033
    @mr.shadestrains6033 10 місяців тому

    🚂😎👍👍👍👍👍

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 10 місяців тому

      looking forward to more trips this spring..

  • @mr.shadestrains6033
    @mr.shadestrains6033 10 місяців тому

    Hey. Bob haven’t seen you in a long time 🚂👍👍👍👍👍👍

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 10 місяців тому

      hey Mr Shades, unfortunately back in August my husky developed oral melanoma. Many trip to the hospital for treatment. Unfortunately January 2 he passed. Im still coming back. The trains are alive and well.

  • @JohnGrosso-m3u
    @JohnGrosso-m3u 10 місяців тому

    Did the 614 in Oct (20th?) '96 foliage trip HOB-> Port Jervis. I got awesome pics of the runby in Jervis. So close for the pics, I almost got blown over from the speed

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 10 місяців тому

      Thanks for watching, most trips we did 3 runbys with each one going faster. Absolutely if you were close you got cinders and a push back. Those were the days

  • @garykane7354
    @garykane7354 10 місяців тому

    In the automotive circuit breaker what amp fuse do you

  • @garykane7354
    @garykane7354 10 місяців тому

    What amp fuse do you use in a circuit

  • @mr.shadestrains6033
    @mr.shadestrains6033 11 місяців тому

    🚂👍👍👍👍

    • @BobsOGaugeTrains
      @BobsOGaugeTrains 11 місяців тому

      Thanks Mr Shades. Keep up the great work.