Відео

Just finished crashing mine and breaking alot of the discontinued parts including both gears so sadly I think my 450 flying days are over... 😥Or i guess just until i can get my hands on all the parts. Im sure over time i will be able to find it all somehow, hopefully... Good Video man 👍

It looks really nice, i wihs i could have a 600 size some day.. i got a small 100 size, a 275 Esky, and a 325 KDS 450SV And my mom said "Now you just need one of those really big ones on the wall above them" haha

That's on 3s ? Do you think it could fly on 2s ? Thanks

Mine flies amazing, but its technically still a 450x since it has the beastx controller.

Shame right Spectrum Electronics

Thanks for your vid

You are absolutely right it's tail heavy thanks for the info I just got one this week.iv seen a lot of vids on utub about this heli.and nobody has sead a word about it being tail heavy except you. good info man thank you.

Don't lose it in the corn. Where are you located? Our flying club is near the RI shore, so we often have wind.

Great video. Are Helis more fun for you than planes?

It feels too floaty like its not having enough weight in the nose end. Im using a 4s. Any extra weight can be added to the front to make it fly better or a higher class battery?

Hello sir I have a question about the servos,I replaced mine with the Torq servos,what frequency do I use? Thank you

I have a umx p47 from several years back that I put the voodoo motor and prop on. It has an incredible roll rate and is just as fast as this p51. Crazy speed....

Great info here. I have been FPV the 230s for a few years with vertical straight down steady military dives that quadcopters can't do. I am moving the entire FPV and servos and motor (direct drive) from the 230s fuselage to the fusion 180 now.

I have a Eachine / Volantex / rage super cub, and it's a good flyer . You'll find that top rc made the cub you are flying, and it has a shorter wing span .

Thanks for the info now going to order one

I just bought one, hopefully I can figure out how to bind with my Radiomaster TX16s Four in One

Nice flying sir,where did you get the hardware from,that you said you replaced?

I always used to get Michael Schumacher to check over the current model Hyundai Getz before I kitted up each of my granddaughters for her first driving lesson. 🤔😉🙄

👍🏼👍🏼

It's so little I cant see it most of the time. That's with my face looking at a desktop monitor of 43 inches and 4k..

super video. thanks ! I have one and learn to fly with it.

It’s like a super cheap pattern ship.

But m8 a rustler

👍🏼👍🏼

👍🏼👍🏼

They are definately fun to fly !

All I've ever flown was fixed wing and fpv quads, but always wanted to learn helis. They just seem really complicated to fly. But this seems like a great platform to learn on. Great vid!

I have this helicopter and I have flown mine a lot, I will warn you that the capacitors sticking out of the front of the stock ESC are only secured by the solder pins of the capacitors. The vibration of the helicopter will cause the capacitors to just break off during flight. I had to open up the ESC and solder in new capacitors when this happened to mine and my father's 500 3D. I have added hot glue around the base of the new capacitors to keep them from breaking off again. Modern ESCs have capacitor holders that solve this issue.

You are the man!!it amazes me how you can just throw that thing around like it’s nothing,and here I am just trying to make circles,lol

Love the videos . Got good raw flights ! Not edited

She’s flying great 🤙

I want a super fast UMX in the shape of a UMX conscendo, but with a flat wing. Basically a UMX hotliner running on 6s ? That would be my absolute favorite plane for a while for sure.

I got mine, and it flies like garbage. Spool ups are nail biting adventures as it wants to dip rotors in to the ground. I see you spool up and didn't touch a stick, try that with mine and you'll end up on it's side with rotors digging in to the ground. Obviously something wrong with my setup on my NX-8 radio. Horizon hobbies tech support useless. Even sent it back to have them tell me "Nothing wrong with it", that they flew it twice with no issues. And that was the extent of their help. So, until I get some REAL help, it sits, unflyable.

I have a 600x in absolutely mint condition that I acquired as part of a lot purchase. It has the original Eflite 700 500kv motor, a Talon HV120 ESC, the original H6040 cyclic servos, and the 6080G tail servo. I installed an IKON2 BT fbl with two Spektrum satellites. I have programmed the fbl and done a full ground functional checkout. This heli is for sale and I'm taking offers. Thx.

Did you have to add more weight to the front to get the CG right?

I got mine, and love the scale looks. I think it flies more scale with 3s, but have dropped a wing a couple times, trying to fly it like a Turbo Timber Evolution. Recovered a couple of them, but also ended on the ground, with limited damage. Love the airplane, but for worry free flying, I’ll stick with my TT Evo. I’m not the first to experience this, but no one but Jon’s Rc mentions it. Nice flying!

but tbh i think 5min of flight time on full power is for that little guy a good performance. Yes, theres stil much air for improvement, accepted, but in my humble opinion it is perfectly fine :)

That stunt 2 is no joke!! Nice flying

I sure enjoy mine! flying right off the road in front of my house. I dont have a long approach for landing so I have to go full flaps in a good dive and lands perfect every time.

"Yeah tower this field is almost done lemme just knock out a few snap rolls to be sure i got everything."

Where did you get that helicopter landing pad?

3 seconds in… this is an awesome plane… hitting play again… 👍🏻 (edit) I envy that field! 😬

That was my first heli. It was a lot of fun. I've now gotten into planes , but I did just get a 230S. It's INSANE compared with the sr120 obviously. (I didn't have the new technology, it was 10 years ago, it was a handful as a beginner)

Your video made me sold on the UMX.

Hey man I've been watching your videos on the fusion 480/550 for awhile now, and I was wondering if you think a 6000 pack would fit decently in the new 550. I only do mild 3d and mainly upright flight right now so a minute or 2 of extra runtime would be appreciated

Is there anyway possible either electronically or mechanically to get more angle out of the swashplate?

Great Flight Young Fella. I recommend as well for Plane Pilots that want to fly a Heli. blades are great for Airplane pilots. Im 65yo an a 14 year rc airplane pilot. Love , Blade Heli s. Have nano s3, 230 v2 an now a 150 s, no telemetry. as well the cfx 180. Mistake there,, lol beautiful tail, an VERRRRRY similiar in some parts to the 150,, However. The 180 cfx is not a begineer Heli at all.. If your a plane pilot an want to sport /scale fly mostly, an want to 3d about 4 mistakes hi??? go Blade not the 180 cfx tho,,lol

Nice flying sir,maybe you can help me,I have replaced my tail servo 3 times,every time I put one on,go out to fly and it goes out,they keep breaking I don’t know why, im getting tired of buying these tail servos.lol

Wish I had bought one of these when they were available

No reverse