Відео

Just changed mine out and your video was the perfect instruction. Thank you!

Oh God. I ended up dismantling the panel from the door. 😩.. That tells me. Google it before DIY it or pay a shop excessively for the job. Thanks for the video.

You're a godsend!! I know this is an old video, but I just barely got this problem and wrote it off as a lost cause!! Thank you, immensely, for restoring the hope in this single mama!!

To fix the intermittent start button problem mentioned at end of video, I disassembled all the way to the PCB and replaced the microswitch behind the outer button. It took a steady soldering hand to do that, so find an electronics nerd friend to help out. The switch has four legs and is universally used on count less appliances of all brands. It’s so cheap that a minimum order is a dozen or more for $5 or so off Amazon.

GOAT

Thanks bro

You still have mower?

thanks for this! no need to remove the back cover to get to the thermostat. paper towel wipe down of the thermostat did the trick.

Super helpful. Thought I had a problem w replacement ice maker. Turns out it was just a poor connection between maker and wiring harness. This trick allowed me to quickly confirm the poor power connection was corrected and stable through a couple cycles. Saved me hours of waiting Thank you!

I just cleaned my thermostat and now it’s heating up again. Try that first; it’s the quickest fix and hopefully it solves your heating problem.

Thanks my door is similar to your, no hinges just a rail.

screw without a head = grub screw

Brother you helped out so much!

Thank you for sharing. Ordering my parts today. Wouldn't have thought of getting it if it wasn't for this video

Hi, great instructions and tips. I installed a new ice maker and did the test to have it go through a cycle. All seemed to be ok, except the arm did not raise and/or drop by itself, as shown. What can I check to see what the possible problem is? Thanks

Thank you very hepful

Very helpful thank you

I’ve had mine for years too, but mine is not that clean. 😅

The video gave me the right steps to solve my problem. Thanks dude

naaldwijk

Thank you!

Thanks, brotha man.

What is the technical name for the adjustment bar? How do I remove it since mine broke in two? Thanks FOUND IT!! Pivot Block

Thanks to this video I see how unlock the 00636708 lock activated for error with the door open. No other indication on Internet. Thanks a lot!

Didn’t fix my issue in particular but I just wanted to note that you cut your grass way too short and you should be edging vertically, not horizontally. I’ve never seen anyone do a yard this way, it’s blowing my mind how bad it looks compared to a dense mowed lawn with 4” blades that are tight straight up and down a half inch off the sidewalk. Nothing beats that clean carved edge of grass down a sidewalk and driveway! Now if I could only figure out why mine is spooling like there is no tomorrow.

This tip worked for my 2006 Toyota voxy as well. Thanks from nz!

Thank you so much

THANKS!!!

Thanks 🙏

Life saver thank you

Same problem, I Have an older model Bosch #SHE3ARSXUC. I changed the inlet valve with a OEM part "40$". I found by vacuuming the drain area below filter basket and drain hose it started working all the lines have been disconnected and cleaned out. ( Still defaults to clean) ..I am going to change the float switch next and see what happens. Perhaps this is the issue? Perhaps there is a weak signal telling the inlet valve to open and start the filling process? a faulty float switch? .. I'm baffled why it works after the drain line is completely cleared but unfortunately I can't figure out what the root cause is. I can fix most things and I will not give up. My Wife is starting to look at new dishwashers at 1000,$ so therefore I'm under a lot of pressure to get this problem solved🤣🤑

Ty man. Didn't know where to look for this on the DirectTv site. Made my life way easier ❤

put the link where you bought the part

Hi! I too have a Breville toaster oven and when I opened it to see if I could repair it, I found a large piece of what appears to be asbestos. Its located near the wiring in the control portion. In your video and others I have watched, the asbestos is not there. Our unit, according to Breville, was manufactured in 2012. What do you suggest the average homeowner do? I have contacted Breville and their customer service person knew nothing about it but told me she would ask around and call me back. I'm still waiting. Thanks.

Just wanted to say a heart felt thank you! My courtesy lights have not worked for 2 years. After watching your video I went to a local automotive electronic supply and purchased the diode you recommended. I followed your install instructions and now have courtesy lights every time I open the doors. Aside from having lights that now work I saved a bunch of money in the process. Thanks again!

Almost all toaster ovens are manufactured in ways that make their repair difficult. Screws are difficult to reach, as with the Breville here, or they are not driven by Phillips or flat head screw-drivers, or rivets are used that must be filed away. Also, replacement parts are not standardized when they could be easily, parts such as thermostats. One must usually by from a parts distributor who ads his markup the the manufacturer's. All this difficulty is part of the effort to make you junk yours and buy a new one. That is the American way! Sucker the public !

I have been trying to get to HDMI for the last 3 days so thank you

Thanks for making this video. It really helped me fix the same problem in my 2010.

Thanks pal

lol thanks simple and easy !!!

Thank you so much for this video. Auto shop wanted 180 for labor. Insane what they were trying to charge for a 10 minutes fix

I wanted to join the comments and also say thank you for this video. Yes, a 20 cent diode and my time was well worth the $100's that dealers charge. The wise consumer should always ask why do I have fresh coffee, cookies and a comfortable lounge when I drive my car into a dealership. The money comes from somewhere?

T 2️⃣5️⃣Torx bit is the size of the star

This video helped so much. Thank you.

Saved me from buying a new remote. Lmao.

Man after all these years i just now found this out. Ive alway use the tv remote to change inputs. It was annoying to do everything else with directv remote and had to always have tv remote near by just to put it on the game. Decades later here we are and make it so bad it says input at the bottom which I noticed but never clicked in my brain thats that was it.

You Sirr helped me tremendously thank you will sub!

Broooooo thank you so much

I think that you may have just helped me briliantly, as to be very honest, this lady is a terrible housekeeper and don't see all too well. But, I did some due diligence since my preheat and temperatures were malfunctioning and now they sedm to be working! So glad to be reading your post and others' comments!! A real Christmas present, for which I thank you😉💖

Thanks sooooooo much….🙏🏽