Відео

Up the Bobbers

Well done Lee great work 👏 a natural in front of the camera aswell 👌.. keep up the good work guys 👏

HI another great video Rob. This is Robert here you helped me out the other day reg a bentone burner, this is my wifes laptop so shes now subscribed as well. I had to go back out to that boiler again today and did what you told me to do ie new transformer and all i had was a 830 control box i took off a spare burner I had so I stuck that on. Just curious her capacitor is supposed to be 3 microfarads and hers measured 2.4. I had a 4 microfarad in the van could i have used that or would it damage the motor. I didnt put the 4 on so i just left the old one in it as i wasnt sure. Anyway her burner is firing like a dream now all thanks to you mate so i cant thank you enough. Just like to know if i could have stuck a 4 on or did I do the right thing by leaving it. strangely enough she had a clear plastic tiger loop and I agree with you about seeing the oil in it. Thanks again and take care.

Hi bob would be nice to see more wiring and which controls you prefer videos are great keep it up👍

Ah, what a breeze of fresh air!!.....Young, good looking talent in front of the camera for a change!!.........The English Rose, fair of skin & inherent good looks. Talented too, how on Earth Bizzy Izzy dear, how can you work with such a rabble of Bobers??!! It’s clear to see, the terrible twins have not polished up their act one jot!! In fact, if anything their skiving & frankly, disgusting behaviour has escalated! Rob, still enjoying the first flushes of marital life, the honeymoon period... where his wife is keenly awaiting his return from work, with a kiss & 3 course slap-up dinner. That’s changing shortly matey, it’ll be beans on toast & cold shoulder, if you return from the Pub Drunk & piss in the wardrobe!! And Lee, poor Lee, he always looks like a Rabbit with eyes caught in the Headlights or he’s slightly constipated, from failing to include enough roughage on his Sandwiches. So, young Izzy, take my advice, get out now. I see dark days ahead. I can see you being roped into getting your hands covered in Kero.......Or, even worse, administrating assistance with blocked drains!! As always I send out my luv to Karen, her smile will always stir my loins❤❤ Thanks to everyone, as always an interesting watch👍👍

Great video again. Just wondering is the 832 control box only meant for commercial because you mentioned it’s 2 stage lifting 1 coil and then a 2nd coil. Is it ok on a domestic burner with just a single coil and could it be replaced with an 830 as the burner has an intermittent fault and I’m suspecting it’s the control box.cheers another superb and informative video again. I

Izzy is stealing the show! Lol keep up the great work! Always love the videos.

Enjoyed “the little bit different “😀👍

TBH I would of contacted WB for a fixed price repair, as it covers 3 major parts and unlimited minor/small parts, so with the ex vess, mtr and control box, plus more cost effective for the cust. but everyone has the own approach. (the boiler you were working on looked like the room sealed version so it will not have a post purge board). interesting vid tho. and such dedication.

Hi BOBS My first comment on the channel and I love the content each week. I want to ask with rads do you oversize on BTUs from what the online calculators suggest and if so by how much % or BTUs?

Good on you Izzy for suggesting and carrying out the UA-cam and media for the bobs. The content is a massive help for me as an engineer out in the field and shows what great work you all manage to do. Thankyou everyone at bobs and thankyou Izzy 👍🏻😎

Izzy please wear gloves, you only get one pair of hands. Great vid!

You went the extra mile so you are that family’s oil boiler man for life. Great video superb content. Great tip on the copper grease for long screw and also keeping the electrodes level with the nozzle face. They didn’t teach this at my recent oil logic exams course.

Fantastic video, a total masterclass in servicing. I thought I was thorough but you’re on a different level entirely. So much to learn still. Loved the tips on not overtightening main door and smelling the coil for oil etc. What did you say you used the clean the springs was it sugar soap I just usually wash them in hot water with wire brush. Absolutely brilliant keep the videos coming. Any chance you could do a video on a firebird service as we’ve a lot of them over here.

That was an excellent video. Thanks for sharing. Did you use the Riello burner that was on the firebird into the Grant is that why you used the extra air diffuser and the serrated gauge plate because you went from a 40 kw to a 26kw. I’ve never seen or heard of those tools, very interesting and I take it that’s a low nox burner. Is there much difference in servicing the low nox burners to a normal RDB burner. Thanks again I’ve just discovered your channel and it’s a god send. So much to learn there really is.

Nice to see a job done right.

Very informative, thank you!

How can you make it worthwhile to remove, strip down, rebuild then call back to fit a burner? Would it not make more economical sense for everyone to just have a few new burners in the van and just replace it?

I find these vids fascinating....can't stop watching....thanks for posting 👍

Just repaired a Stirling burner this week it's a gold mine at the moment no one around in my area qualified or wants to work on oil.

Hello Rob. New subscriber here. Loving the content buddy. 👍 fault finding is always something good to watch. 👍

Good tutorial Rob enjoyed it.😂

Top job, one of best video about boiler service.

It's a jig rob and you're the machine 🎉🎉🎉the only lagging i enjoy is down the pub with the Stellas and fellas 🍺🍺🍺🍺

Excellent info, what do you do to the frayed ends of the rope before you fit them?

What do you use for liquid to wash down the exchanger? Vinegar and water?

As someone who services pressure jet boilers(mostly Riello), I found this video very interesting. Thanks 👍

Thank you. Helped me out.

Great video guys. Could we maybe pan out on some footage as I felt in some of it we were super close and I found myself trying to look around my screen 🤣

very nice job on the brickwork - do not see that very often. Ryan - wear ya knee pads.... Nice to see some good attention to detail too. Very nice install and content.

Nice vid, not my choice of boiler tho - I tend to go for ones with good manufacturer support with their own dedicated service workforce backup. would it have been an advantage to fit a vent on the up and over pipework from the boiler? nice to see a start to finish installation tho.

flicking the trip is not safe isolation chaps :P funny vid tho :) keep it up...

Well done Bobbers

Another great one Rob & a delight to see Busy Lizzy. It’s clear to see your success as a business is down to your wonderful family, nice, honest people. Showing compassion to a customer going through a distressing time, makes you a nice guy Rob👍👍 I loved Lee starting up the SDS as you walked onto the job. That’s one I did all the time, makes the Boss think you’re working hard😂😂😂 Strange, but I missed the terrible twins, their shenanigans, always keep me amused👍👍 Forgive me for my short post today, I feel somewhat weak......I’d to buy a Round in the Pub last night, which was traumatic in itself, but I was even more horrified to discover they no longer except a White Fiver!!.......I know, the hardship of an ostentatious Jock!! Luv you all ❤️❤️❤️

I gave same boiler but a water softener unit added.......the bar is 0.8 so needs topping up... the valve you turn at 22seconds in the clip has no pipe attached would you know what I do...can't add photos of what it looks like on here.....thanks

Hi Bob love the video can I ask you the riello g5x burner will it run ok on HVO fuel when available or will I need to change parts like pump Nozzle and flex hose my oil tank is 3yrs old .have a nice day😮😅

Rob pleased to see your feeling better & well done Isabelle for much better camera work. 👍

What is the name of the oil filter it looks quite big.

Shouldn't the pipes be insulated with arimaflex helps to keep the heat in pipes.

Interesting how it should be done. I am wondering how my grant currently has clean , cold water, leaking and the heat exchanger has megatons of soaking soot and or water on each baffle with some of them corroded, pitted and a couple in two halves. Every year someone turns up and brushes and vacuums, so what's gone wrong?

Recored on a 2012 mobile? 😂

Please get a go pro. Great video guys

Another great video 👏 great job boys 👍

Very entertaining and informative, as always. I'm fascinated by the skills required to install such essential systems. Hope you all have a good weekend and your Asthma calms down quickly with some rest and Lee's knee gets better soon.

Its like watching the blair witch project 😂

Firstly, I hope everyone is feeling better. Not being 100% is a curse when you’re busy. My best advice; though difficult, have a Duvet Day, loads of fresh Orange Juice, snort Obis Oil, plenty water & Max Strength Cold Meds. Viva Espana!!......C’mon Spain!!.... If Engerland win the Euros we’ll never hear the end of it!! It’s like 66, they bribe a Russian Linesman & boom, we’re still hearing about a jammy win, every Engerland game! The twin burner Rayburns are the work of the devil!!.....Every single one we fitted was 💩💩 Builder we worked for, against my advice, fitted one. Two years latter he admitted I was right & scrapped it. We tip for Lee, he looks a lovely bloke, how he ended up working with you Pirates - Gawd alone knows!! Boring Joist then threading Plastic through them, rap the pipe in the Joist with DPC. It kills all the creeping noises. Tell Ryan not to Nick that Rayburn, it ain’t worth it son!! Love to Busy Izzi, Karen & Ben. Anyone else, you know who you are!! Dick Puller, your favourite Jock!!❤❤❤

INTERESTING AS ALWAYS EXCEPT THE CAMERA MOVEMENT MADE ME FEEL SICK 🤢

I did that but the needle didn't move😮

Great one guys!! Even an old fart like me learned something👍👍👍 What a lovely surprise, Busy Izzi popped up at the end. You terrible twins are alrite, but you don’t have the beautiful English Rose looks of Izzi👍👍 When’s Rob back? Even if you pair are not missing him, I am!! Well, must dash, all us Sweaty Socks are getting settled in to watch Engerland go out the Euros😂😂😂 Catch you all later, luv to all Dick Puller❤️❤️❤️

How can you tell the diffrence if its the cobtrol box or the motor thsts faulty?? Thanks