TURBO 5 Cylinder Build - Porsche Rally Build | EP 6
Вставка
- Опубліковано 24 лип 2024
- Mike is swapping the stock Porsche motor with a VW/Audi 2.5L O7K 5 Cylinder Engine, while adding a Borg and Warner Turbo and using the@BoostBrothersGarage swap kit. Mike is also dropping in @IEtuned pistons and rods to make the beautiful 5 cylinder sounds Audi and Volkswagen are known for. Watch Mike tear down this VAG motor and rebuild it into an engine that is going to give the 944 the power to compete through the woods.
If this is your first episode, check out what Mike has done to the 944 so far:
Intro: Series Intro: bit.ly/3E0k9xu
Ep 1 - Old Motor Comes Out : bit.ly/3AfSVlb
Ep 2 - Turbo Manifold Fabrication/Turbo Test Fit: bit.ly/3xL8lwc
Ep 3 - Hot & Cold Side Cooling Fabrication: bit.ly/37ayGrM
Ep 4 - Custom Roll Cage Pt 1: bit.ly/3DIgLba
Ep 5 - Custom Roll Cage Pt 2: bit.ly/3m1FKzr
A HUGE thanks to our SPONSORS:
Boost Brothers Garage Swap Kit: bit.ly/3zPvjna
Bilstein: bit.ly/3fpM4vY
TireSource: bit.ly/2TdzLbB
Rennline: bit.ly/3bbZNVb
IRP: bit.ly/2QAe73w
Integrated Engineering: bit.ly/3whWTqS
Hella: bit.ly/2SbCg0Q
Hawk Performance: bit.ly/2S8rV5L
CSF: bit.ly/3owUPIY
South Bend Clutch: bit.ly/3ovLBwl
ECS Tuning: bit.ly/3fYce8u
The original 944 Winter Beater Build: bit.ly/3ymqrVT
Check out Mike's other builds: bit.ly/3f20QKx
Follow Mike on Instagram: bit.ly/3esZGEF
Mike and the crew have a podcast, CAD to CARS! Check it out here: bit.ly/3qXvuZq
Follow us on Social Media:
FB: bit.ly/2XvMzN8
IG: bit.ly/2XYB3Js
Subscribe to our channel to never miss a new episode from Mike as well as other great European car content - Авто та транспорт
I used to work for ECS long ago I loved it... building big brake kits all day and running lazer CAD. I moved back to Ohio from Missouri and really miss the place and the people there they are top notch...
Feel like I've been waiting for this update for way too long, so much so that I've rewatched the other episodes about 5 times, but totally worth the wait. Easily my favourite build, especially the journey it's been on since its intro as a winter beater.
Hell yea! Thanks for tuning in and following! We appreciate you!
This build is so good… if I had the time, money, space, tools and all the skills, this is how I would do it. 👍
Same.
@@ecstuning Same.
@@ecstuning Same.
Same
Love seeing the support for the 07k!
dude. i just got a 07 jetta 2.5L automatic and saw this... you got me tryna turbo my car >:)
I love my 1983 Porsche 944 but I think it definitely needs a 07k down the road...Great job I can't wait to see what you will do for the transaxle
Thank you Mike, for never taking any shortcuts (no matter how small) on this gargantuan project. We know you do it all for us
Great videos. Thank you for posting. Just got my Boost Bro's kit, and 07K engine. It will be going into an 86 944. Can't wait to get started!
I’m excited for you. I plan on doing one soon.
I would die to have a similar setup on my rabbit! Seriously the build and video quality is out of this world. You guys deserve all the views. Can’t wait for the next episode!
I’m here thinking the same thing
Building a rabbit mannn
That engine is best part of this build.
Can't wait to see this on stage.
Look sick 👌 making me want to hold on my MK6 2.5 Sportwagen and build it. Such an inspiration
That thing sir, looks absolutely magical!
One thing for grinding rings: grind the opposite direction that Mike shows (wheel rotates towards the center of the ring). Even if there isn't a bur, rotating the grinder from the inside out can chip off the chrome coating.
Mike is awesome. Give him more projects!
More are coming!
Nicely DONE !!
Nice editing, you don’t ramble on.. cool build.. I’m a fan, subscribed!
So satisfying to watch an engine come apart and go back together.
Mike, well done! That turbo is INSANE! Now I know I can take my Jetta's 2.5l engine and do that to it. No particular reason but why not?
Awesome job. Keep it up 👍
That thing turned out super clean, pretty build
07k, oh man one day..I can't wait to build mine in the future. Great video!
Can't wait to see you all on stage. I do rally media, let me know if you need coverage. 🤘
Gorgeous
This is so good
Very enjoyable build 👍
Big fan of the Cat lumpy sticks. I started using them back in the day on my old 9A/ PL builds. They rock. Good shit on the solid lifters, smart man. Those rods are worlds better than the OEM ones. This thing looks the business fully dressed!!! I love the intake mani especially, all looks fantastic. Can’t wait to see it dropped in the bay 😃👍🏻
Nice job!
Nicely done sir 👍
This build is so gooood
I really hope these motors go unnoticed so I can get one cheap!!
Get one while you can! They're still reasonably cheap as of now
@@ecstuning saving up for a ski mask, paper bag, and airsoft pistol as we speak! I should have a 5cyl in no time
@@ecstuningyeah, 1k to 2.1k for a reasonable usage and well maintained.
One of my fav builds to watch but man we get an episode once every couple months wish it was more consistent
these things take time my friend. Coming soon
It's the most beautiful puzzle
You built a gorgeous engine.
Somehow this didn't show up in my notifications when it dropped.
Great video man, I never tire of good engine build content.
Can't wait to see the finished product!
Commin on strong 👌👍
I love Mikes’s builds. But working at a machine shop myself I can’t believe he didn’t send the head to get decked for piece of mind. I mean he already sent the block... decking is pretty quick and really important as it will prevent head gasket failures...
I checked it for flatness. I get piece of mind, but I’m also not into spending money for things I don’t need
@@mikeday3644 hey Mike i really appreciate the fact u read & answer. Love the builds. Cant wait 4 this thing to start! Also u guys should make some videos with the drift golf. And ur personal garage, I know u own some cool stuff
Nice job dude, really disappointed we didn't get this engine in the UK
I need that turbo header in my life lol
I would love to throw this in my S70R. It is ABOSOLUTLY BEAUTIFUL I won't lie I'd paint her a different color and probably you one of rywires kits to get that cordless (Bluetooth) engine bay look but that block is a masterpiece
Is there any downside to running the low profile valve cover?
Let's goooooo
Best mechanic channel ever!
🤘🏼
Ooo pretty
Hoping to see even more of this build before too long...
We're working on it and gearing up for more consistent content moving forward!
@ 4:14 "they usely turn copper colour as they wear"
Copper colour means "worn".
The "coating" is in fact the bearing material. The copper layer is the layer between the steel back and the bearing material. So when you see copper it is really, really time for new bearings.
What car is this specific motor out of and how many miles?
This build looks awesome!
How is the 07K powerplant for building? i personally never seen one built.
Yessssssssss
Agreed
Also is there a better head gasket than the shitty layered oem ones? I pushed water through mine and it resealed but it obviously doesn't like long 140mph pulls
Amazing build Mike! I'm curious what crank you used? Is it a forged unit from an RS3 or did you get an 05/06 donor 07K that had a forged crank? Cheers!
ECS does rally? 🤔 That's pretty cool.
Great video I have helped with two stroke performance builds ,on a 4 stroke what specs do you follow on reassembly. Liquid cooled on a two stroke you set everything loose in p
Sorry you set everything loose on piston and bore , ring gap below specs same on 4 stroke ?
What are you planning to do for the transaxle? Stock 944 won’t handle much power. Turbo units are better but still somewhat limited. Are there other, higher-power options you’re thinking about?
how is that modified cam phaser holding up?
Hollllyyyyy Funf zylinder!!
I have a 76 914, this engien fits well in the bay without chopping?! What adapter plate? I was thinking about the WRX engine and trans.
who makes that rear coolant flange?
Can't wait to see the next video.
Would love the parts list on this build
What size are those piston heads? The same size they sell on the site or did you contact them directly and request them specifically? For the 9.50:1 ratio?
I can’t find a turbo kit for the 07k motor, and it doesn’t come with y’all’s kit for the 944 swap… so what turbo kit are you running??? Send a link pls
This man hit us wit that Casey Neistat beat
You have such a large open clean garage. I'm jealous. You didn't include the IE part numbers?
Go find em. Can’t be that hard.
Did IE make you guys custom pistons? What were the comp ratio on them?
Yes they did, these are spec'd for 9.5:1 compression
Can I please put that beautiful gem 💎 of an engine into my e90! It would sound so sick and absolutely RIP!!!!!!!!🤤🤤🤤
Mike only builds for Mike
@@ecstuning 🤷🏽♂️ you can’t blame a man for trying? I see boost sexy tubular turbo manifold, shiny ✨ intake manifold with them race ready red r8 coils 😍 and hotboi colored block and I think 🤔 that would make my e90 into one of the dopest most original and unique drift cars around!!!
Tell me that wouldn’t make for a cool 😎 swap to cover? I guess your welcome 🙏🏽 ecs.
That's an interesting looking oil pan. Did it come from the junk yard too?
It's from the Boost Brothers swap kit! bit.ly/3zPvjna
what ecu you use
I'm surprised you're not checking clearance on all bearings! are these rods and pistons weight balanced?
Just curious, did you find much metal shavings in the oil passages after machining?
Nope, the machine shop did a good job cleaning. Still worth it to check though
@@mikeday3644 that’s good to hear. I have recently built a 5 cyl Audi 2.2 AAN engine and I did not clean the oil passages very well after machining. Now after 4000 Km I still see small metal shavings in the oil filter and the oil have a metal tint to it when I change oil. Would it be possible for you to record the look and feel of the oil as the engine runs? Much appreciated.
Where did you source your engine from?
I was gonna RS3 swap my 2.5 MK6 but if you guys sold these as made to order crate engines I'd buy one if it's less than $8k like the RS3 junkyard engine
Is it possible to take an Audi RSTT DAZA engine with a 07k3 blockhead and change it to a 07k block head will it fit???
Скажи, какой зазор поршень и цилиндр сделали при расточке ?
I would love to build a 400hp 5cyl in a 968
Changed to manal steering?
Sweet, now do it in a Miata
that header is dope as fuck!
Cable drive through body ?????
Why was your valve to
Piston clearance so close you had to reduce you cam advance? Would that not reduce potential performance with that extra few degrees of cam advance? Killer build!!!
The piston to valve clearance was tighter because of the higher lift cams. These cams should make quite a bit more power, even with a few less degrees of advance.
@@mikeday3644 ok cool thanks for the info, love the build!
Do we get this engine in the 🇬🇧UK
The bearing tangs are for location purposes only, offers no protection against spinning a bearing
What throttle body?
my assumption is that this would require a standalone ECU - my question is, why a cable throttle over DBW?
No bolt stretch measurement on the rod bolts? Maybe he knew the stretch and just used the torque that got him to the stretch needed?
Crisscross pattern too
Ugh, I just installed your HD strut mounts and koni sports on my 2011 jetta se. The suspension setup is phenomenal, now you're tempting me to turbo my 5 banger.
One day >:)
I'm curious what Mike is going to do about the open differential. It seems like most people buy a whole transmission from certain 944 Turbo cars which came with an LSD, but that doesn't seem like Mike style. I almost wouldn't put it past him to somehow make this build AWD.
The N/A diff is welded in this trans. The N/A trans isn't very strong and the turbo trans is getting hard to find, so I have a 01E kicking around to swap some day.
How much for a motor like this?
You look familiar do you live in New Hampshire?
It’s a weird thing, but I like the smell of assembly lube…
So my 200 20 valve avant next??????? I’ll let the shop do what ever long as I get the car back be great for videos there are hardly none at all
I wana do this to my 2012 Jetta can I do it too my Jetta?
It’s a 2.5l in-line 6
5
👍Звуковое сопровождение видео очень громкое.
Was this a clients car? Why are there no other videos on this 5 cylinder Porsche ?
No this is Mikes car. We'll have some new content featuring the 944 here soon!
По какой-то причине во всех мануалах по ремонту написано, что нельзя вращать коленвал с не затянутыми крышками.
Did you need the cam phaser, or could you manually advance or retard the cam and leave it? Thinking of near duplicating your engine build.
so sexy awesome engine awesome car= super car killer
You know you could have put an ls engine in it cheeper and it would have been more reliable
Great content but omg that camera work is terrible.
Next project:
Mid engine 911.