A Different Type of XLT Bog- And we fix it! Vintage Polaris XLT 600 Triple Snowmobile.
Вставка
- Опубліковано 8 вер 2024
- Check out how bad this clutch was! It's not always the carbs.
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vE
Oil injection line I use for Polaris: amzn.to/3rMzZYV
Thread Checker: amzn.to/3S0LLKh
#polarissnowmobile #vintagesledders #vintagesleds #vintagesnowmobiles
Yes. Love the lathe work.. wish I had one...
I have the exact same seld and i cant seem too figure out why my track will not rotate on the ground sometimes then sometimes it will start too itll rotate no problem when the track is in the air
Good job. You all make a great team.
Thank you very much!
Awesome xlt's guys
Thank you 😀
That’s a beautiful new clutch. Hopefully it serves Lonnie well for years to come
Were out riding now and Lonnie says it's perfect.
My indy 500 had that much play in the primary when we got it...she ripped good with the new one.
I have done many Polaris clutches with bogging issues and it all the same stuff, mostly rollers and weight pins and bushings. It's surprising how bad the sheave and cover bushings can be and the clutch still works well but if you don't change them the rest of the parts will wear out quicker.
I’m trying to decide on primary clutching, I have a gold spring, bone stock 97 evolved XLT limited.. thinking of a hotter setup maybe blue spring and m10 weight combo?
I like the blue spring and 50 gram weights. My XLT and Lonnie's both run this.
GREAT Day 😁
Im sure most xlts with the "bog" is clutch related. My girlfriends 95 had it. Found a broken primary spring, rollers were flat sided, and weight bushings were egged out, and the outer sheave had a crack in it near the center.. could have been disastrous.. Brand new clutch and it screams like hell. 👍
For the sake of the beer fund, I sure hope you guys are buyin these sleds real cheap at the pre covid price levels !
The amount of knuckle bustin and the price of all the new parts has gotta be amazing if you add it up .
Did somebody win the lottery ?
Sleddin aint cheap, but its worth it 😁
Been trying to figgure out my '94 for aehile now, bogs at 40 mph, wont go faster, then cuts out and dies. Wend through the carbs, and cleaned and sync'd. Found a bad clutch, found a good one, inspected and cleaned. Still does it. Would it matter if it has individual filters and no air box on the carbs? What am i missing.
fuel starvation? clogged pickup, clogged filter, pinched line, something withe the shut off.
@@nuttersspeedshop replaced the broken pickup in the tank already, all new fuel lines, could be the shut off, I can bypass the current one and try.
Hey John, do you have the email for your buddy Tim at Precision Pumps?
tim.precisionpumps@gmail.com
It’s party time in the shop! Where do you get the new clutches from btw? Do you ever rebuild clutches? I know the rebuild clutches are pricey as well, but gotta be cheaper than a whole new clutch 🤷🏻♂️
At least the XLT is out ripping it up again! It’s definitely time for a Nutter’s Speed shop XLT shootout!! Cheers guys!!!
I get the clutches wherever. Ebay. Wahl Brothers, swap meets, even Polaris. New clutches aren't cheap but I'm not into rebuilding them.
Love these videos. Keeping those tripples alive!! Very informative as well. Where do you get your vforce reeds from? Looking to rebuild ultra to swap in xlt chassis
Probably Dennis Kirk, ebay of Mfg Supply.
👍👀👍
Just replace the 12.99 bushings if there are no cracks or warpage on the spider and sheaves.. its 300.00 cheaper..we rebuild clutches before buying new ones..
👍👍
Duct tape Mike!!!!
So was that a Factory stock clutch or a after market ? Could you in the future tell a little more abut what and where the parts come from ? I am going to rebuild a 97 RMK this summer and there is no NONE ZIP NADA SNOWMOBILE shit for 100 miles of where I live ! One other question I have a Polaris RANGER 2007 XP with a BLOWN PDM it has been sitting in the POLARIS shop since LABOR DAY !!! If you know of or anyone else on here has a PDM FOR IT even if it is burnt As long as the pins are all there I would buy it and get MODUAL MASTERS to rebuild it mine melted the pins they cant fix it!!!!
Its a factory p85 of some sort. I cam find the number later, bit its kind of irrelevant because they must have made 100 different part numbers for 30mm p85s. As long as its a 30mm taper and taks a 3/4-16 puller ill buy it. I dont know anything about sxs.
@@nuttersspeedshop Thanks NUTTER got the I 500 on 1 screen the Salt Dash Border Clash on another
So what happens you haven't been in youtube
Was looking for More on the on the old scorpion build???