Це відео не доступне.
Перепрошуємо.
234/250 114 Crow Cams 1288 Camshaft & blackwell CNC Heads IMS Stage 5 Package
Вставка
- Опубліковано 8 сер 2023
- in this video we show you an in-depth look at our stage 5 LS 3 package using the crow cams 1288 camshaft and the Blackwell CNC cylinder heads.
VF Holden Commodore LS3 3 manual transmission
Using this cam shaft in my 6.0 I’m currently freshening up , blocked decked , bored 5thou , set of cp forged pistons , 20 thou off the heads with a 3.5k convertor and 3.7 diff gears to go back in my vf wagon , can’t wait to see how it goes
As always love your videos mate always very informative and straight to the point
Keep it up 👍
Can you guys do some outside sound clips of the camshafts? Can't really hear them inside and will be pretty cool to hear the differences from big to small. Another informative vid, love it mate 👍
Do you flycut pistons for this cam?
More comp more power right.
If it’s not flycut how far can we mill the heads before pvc become an issue ?
How much less power would it make with an auto?
What mods on a 6L is needed to get 360kw?
Im booked in to get my car done with this cam however they are estimating 330kw
This camshaft and CNC heads and you'll make that.
How’s it go with clearance with valves to pistons do you need to fly cut? Iv been wanting todo the 1288
No its still safe with 20 off the heads
@@IndependentMotorsports awesome thanks, I subscribed aswel
@@Raymie213 legend appreciate that
Do you set the timing out a bit on the sprocket on the crankshaft or leave it at 0?
Dot to Dot with these camshafts are perfect
@@IndependentMotorsports try it on 110icl 💪
What size stall is recommended for an auto with this sucker?
3k minimum
I’ve got the 227/244 crow in my LS3, how much for the heads and a retune?
Give us a call at the shop and we can have a talk about what we need to do.
was there plenty of fuel pump and injectors for this combo or is it maxed duty cycle.
You're starting to get to the end of the injectors but There is still plenty of fuel pump left
Real 375rwkw be running out of injector
@@SR-uy7cx did you not read my comment above ⏫
Would this cam work well with a blower or N/A only
It would work but it's not ideal I would recommend the BTR Stage 4 Blower cam
Hi guys
54-458-11 LSR Cathedral Port 227/235 LSA 113 Hydraulic Roller Cam for GM LS GEN III/IV
RPM Operating Range: 1,900-7,000
Thinking of this cam above specs to upgrade current camshaft 224/228 all specs unknown looking for higher tourqe camshaft.
All the necessaries have being done to ls1 air ,gearing,exhaust, heads, engine rebuild .
Any help here in nz would be appreciated Thank-you.
Aaron
I would use the crow cams 1249 it works the best.
@@IndependentMotorsports thanks for that ive just found a good set of 243 heads dumass question to be asked do these work on 5.7 ls1 cheers Aaron
I understood nothing... Kilowatts is for electric things... Engines make HORSE POWER.
Kilowatt is the metric version Europe use BHP method, all depends where you live to what terms they use kilowatt is not only a measurement for electricity
@@Raymie213 I was just being a smart ass, its what we Texans are best at. LMAO