I just installed an fp3. I have it in auto tune. I have 45cells learned but sometimes it Boggs when I take off out of first but runs smooth all the other speeds
I have a question. I'm about to auto-tune my 2007 Ultra Classic. Can I go in and adjust my Throttle Sensitivity and then auto-tune it or should I auto-tune it and then Adjust my throttle Sensitivity?
Once I am using Auto tune and I go and adjust the throttle response, will it still use my Auto Tuned map and adjust the throttle response of the Auto Tuned map?
My tps is flashed with the custom setting from the fp3. I never changed anything in there so what was it set at from Vance and hines? I notice a lot of lag in my throttle. Opened halfway there is a tenth of a second before the power kicks in. I want that power without the lag. What should I set it to?
I just bought a 2020 street glide and added the V&H high flow air filter a set of Eliminator 400 slip-ons and the fp3. I'm about to add the head pipe as well. I have done a few auto tune sessions and my bike is running awesome. The fp3 is amazing and I recommend this to everyone. I do have a question though, on my fp3 it doesn't give me the option to change my throttle. Can some please tell me why?
after you flash your bike go into the option "view and edit map", choose the map you are running and if you dont find the throttle progressivity option then you only have to tap in the "advance options" in the upper part and then more options will be shown........i hope this helps
On my fuelpak I have not this possibility of some reason. My bike is from 2013, if that has something to do with it, I really don’t know. If someone have an idea why it’s like that I appreciate if you can tell me about it. I know where it should be, but still can’t found it.
Hi, My 2014 1690 ElectraGlide Touring have wired électronic throttle but there is no map throttle in engine ECU. I know it because i am tuner. So i don't understand how FP3 can tune it... Is it able to flash throttle management directly (not engine ECU)? Thanks
@@jpcycles i have a new fp3 and it has been updated but I don't have the throttle setting to adjust the response. I have a 2020 harley davidson road glide special and the throttle has a lag to it
I just installed an fp3. I have it in auto tune. I have 45cells learned but sometimes it Boggs when I take off out of first but runs smooth all the other speeds
Can the FP4 do this as well?
Does different throttle sensitivity affect cruise control performance? ie too sensitive, surging etc?
Hi Sir !
Any hint on how to do this with a PowerVision if possible ?
Thanks !
is the throttle adjustment the same on FP3 and the FP4?
I have a question. I'm about to auto-tune my 2007 Ultra Classic. Can I go in and adjust my Throttle Sensitivity and then auto-tune it or should I auto-tune it and then Adjust my throttle Sensitivity?
On my RG, i dialed it in for Aggressive…. OMG… that is super aggressive!!
Once I am using Auto tune and I go and adjust the throttle response, will it still use my Auto Tuned map and adjust the throttle response of the Auto Tuned map?
Nice information 👌
Is this changed now? I can't find it on the application?
My tps is flashed with the custom setting from the fp3. I never changed anything in there so what was it set at from Vance and hines? I notice a lot of lag in my throttle. Opened halfway there is a tenth of a second before the power kicks in. I want that power without the lag. What should I set it to?
Keep moving the wheel he showed until you find one you like or you’re comfortable with.
Why race 1.1 is not recommended?
I have a Sport Glide and find the throttle too sensitive , can the FP3 make it a little less aggressive ?
Yes. Start by putting it on the base setting the you can address it at specific RPM ranges and gears.
Thank you for the feed back
I just bought a 2020 street glide and added the V&H high flow air filter a set of Eliminator 400 slip-ons and the fp3. I'm about to add the head pipe as well. I have done a few auto tune sessions and my bike is running awesome. The fp3 is amazing and I recommend this to everyone.
I do have a question though, on my fp3 it doesn't give me the option to change my throttle. Can some please tell me why?
Same here, 'throttle progressivity' and 'speed limiter' do not show. could this be because my FP3 is seen as a customer and not dealer..?
I buy my fuelpack last week and don't find it either... Throttle progressivity
after you flash your bike go into the option "view and edit map", choose the map you are running and if you dont find the throttle progressivity option then you only have to tap in the "advance options" in the upper part and then more options will be shown........i hope this helps
Its because 20 model baggers ecu have the rdrs in them
@@randyrayfield1707 do know of anyway to disable or get around that ???
How come my fp3 doesn't have this option to use?
Can this be done using the throttle cables? More so i would like to have full power at 3/4 throttle instead of 4/4.
Yes, but not with an FP3. You would have to change the cam on the end of the throttle tube to have the same effect on a cable driven bike.
On my fuelpak I have not this possibility of some reason. My bike is from 2013, if that has something to do with it, I really don’t know. If someone have an idea why it’s like that I appreciate if you can tell me about it. I know where it should be, but still can’t found it.
My 2013 cvo roadglide has this option on throttle sensitivity. I just installed today.
Hi,
My 2014 1690 ElectraGlide Touring have wired électronic throttle but there is no map throttle in engine ECU. I know it because i am tuner. So i don't understand how FP3 can tune it... Is it able to flash throttle management directly (not engine ECU)?
Thanks
It can adjust how quickly the electronic servo opens the throttle.
Does this work on 2015 cable style throttle ?
No it does not
My new FP3 2021 does not have throttle progressivity adjustment in the menu. Perhaps it is done automatically
I have the same experience. I purchased my tuner recently too.
@@ingemarnilsson5498 i asked and V&H said my 2020 does it automatically through the ECM ie don't need the FP3 to do it.
@@billflixtone6684 what or where does it set the settings to if it does it by itself cause mine is lagging still
Race 1:1 is sick I see my gas mileage going down because of this lol
Haha! Hell yes!
and perf?
Harley sux
my fuel pack 3 app when you click map optimizatipn, the screen where you click "throttle" doesnt look like that
Make sure you have the latest version
@@jpcycles my bikes a 2016 dyna street bob, just make sure the app is updated for FP3?
@@jpcycles i have a new fp3 and it has been updated but I don't have the throttle setting to adjust the response. I have a 2020 harley davidson road glide special and the throttle has a lag to it
Lame should have shown a before and after snap of the throttle.