vielen Dank für das Video, sehr hilfreich. Verstehe ich es richtig, der Magnet muss nicht ultra genau irgendwo angebracht werden, einfach "ungefähr" mit dem Tool?
perfect explanation thank you, I have a problem about nearly 1 year with same item Ultegra Crankset Powermeter, I made all of this steps than zero and magnet calibration, and than I can see watt value on my phone in Shimano App. but I only see 0 watt on my Garmin 1040 and 840, very interesting, what had I done, I cant solve the problem, please help me about this situation sir, thanks..
@@siroccocycling my non drive side crank has ripped off the power meter wire. Is this necessary for the PM to work? Or can it work from one side? Thanks
@@siroccocycling ok bedankt, dus elke 2 weken een magneet kalibratie en daarna ook nog de nul kalibratie, of is dat niet nodig, bedankt voor het snelle beantwoorden
merci pour cette video. car j'ai acheté un velo neuf équipé, et aucune explication ! le capteur de puissance n'était meme pas chargé. pas étonnant que je n'arrivait pas à l'appairer avec le compteur. j'ai pu voir grace à cette video, comment faire, car les notices se font rares ...
Fantastisch wat snel beantwoord zeg, maar ik bedoelde dat magneetje, alles is op geladen en ook gekoppeld maar zie wattage en cadans op edge,bij futurumshop zeggen ze dat ik geen magneetje nodig hebt pffff
turn on the subtitles for the explanation 👌🏼
Of course I saw all of your explanation and do it same but problem not solved I only see 0 Watt yet
Nogmaals heel hartelijk bedankt voor jou antwoorden, ik heb het zelf opgelost met een plak magneetje, 😂😂
Top!
Thanks a lot. My mechanic failed to attach the magnet - couldn’t work out why this wasn’t working, till your vid. Thanks again.
Thanks 🙏🏼
komt wel wat bij kijken voor dat het geinstalleerd is. Tof met die ondertitels ook, had het eerst niet door, dus filmpje maar 2 x bekeken 😁
Dankje! Leuke reactie, onder alle nieuwe video’s staan ondertiteling 😉
And how to remove the left connecting rod afterwards, what key would be needed to remove the axle connector? Could you make a video?
Thanks for your message. I would look if i can make a video about it!
vielen Dank für das Video, sehr hilfreich. Verstehe ich es richtig, der Magnet muss nicht ultra genau irgendwo angebracht werden, einfach "ungefähr" mit dem Tool?
Danke schön! Es ist nicht sehr wichtig, aber versuchen Sie, es gleichmäßig mit der Halterung zu verkleben. So können Sie sicher sein, dass es passt
Servus. Frage zu den Ladekabel. Ist das für Schaltung und Kurbel gleich. Danke schonmal
Yeah I think it well
Vielen Dank für das super Video! Ich hatte den Magneten auf der falschen Seite 😂
Keine dank 😃
perfect explanation thank you, I have a problem about nearly 1 year with same item Ultegra Crankset Powermeter, I made all of this steps than zero and magnet calibration, and than I can see watt value on my phone in Shimano App. but I only see 0 watt on my Garmin 1040 and 840, very interesting, what had I done, I cant solve the problem, please help me about this situation sir, thanks..
You can better go to the bike shop in your area. It is difficult to find the problem without seeing the bike
@@onuryazar5831 do u already have this fixed ? I got the same problem!!
thank you
🙏🏼
Do you mind measuring the distance you stuck the magnet on? I do not have that tool
I think 7cm, It is also possible to measure the distance on the crankset
@@siroccocycling my non drive side crank has ripped off the power meter wire. Is this necessary for the PM to work? Or can it work from one side?
Thanks
@@JB-nt4jd Bouth size has to work, we had also a problem with a custumor with this. His powermeter didn’t work anymore
@@siroccocycling ok great. & is the magnet necessary for it to work?
@@JB-nt4jd YES!
how to disconnect that cable from left crankarm when you want to remove the cranks?
It is very easy, You can press slightly on both sides of the cable. Then the cable comes loose.
@@siroccocycling thanks!
Hola buenos días hice todo pero no me detecta el imán agradezco su ayuda
waar kan ik de tool kopen om de ring te plaatsen bij de linker arm? minuut 2'30"
Ik denk gewoon op internet, crankbout sleutel wattage crankstel
@@siroccocyclingIk kan deze niet vinden? Heb jij een link voor mij? Alvast bedankt!
Hoe vaak moet je deze powermeter trouwens kalibreren???
Ik zou dit iedere 2 weken doen (als je veel fietst). Hoeft niet perse, maar beter wat vaker dan nooit
@@siroccocycling ok bedankt, dus elke 2 weken een magneet kalibratie en daarna ook nog de nul kalibratie, of is dat niet nodig, bedankt voor het snelle beantwoorden
@@ronnesselaar1755 Niet perse nodig, ik zou het doen wanneer je er erg in hebt
Спасибо!!!
не упоминай об этом!
Only one magnet for dual sided power meter?
Yes one magnet is enough 👍🏼
merci pour cette video. car j'ai acheté un velo neuf équipé, et aucune explication ! le capteur de puissance n'était meme pas chargé. pas étonnant que je n'arrivait pas à l'appairer avec le compteur.
j'ai pu voir grace à cette video, comment faire, car les notices se font rares ...
Thank you and good luck with your new bike 👌🏼
Does it matter where the magnet is installed. Mines was installed at 12 o’clock position
I think it doesn't matter. You must perform the calibration properly in the app. The easiest is at 9 a clock!
Ik heb bij mijn groepset geen batterij gekregen, is die altijd nodig??, ik zie dus geen wattage op mijn edge 1030, hij is wel gekoppeld thx
@@ronnesselaar1755 batterij zit er niet bij, je moet wel een oplader hebben
Fantastisch wat snel beantwoord zeg, maar ik bedoelde dat magneetje, alles is op geladen en ook gekoppeld maar zie wattage en cadans op edge,bij futurumshop zeggen ze dat ik geen magneetje nodig hebt pffff
@@ronnesselaar1755 oké, normaal zit deze er wel bij! Die achter het crankstel te zitten!