In Depth FAN CONTROL Guide
Вставка
- Опубліковано 1 чер 2024
- Links:
Fan Control: github.com/Rem0o/FanControl.R...
HWInfo Plugin: github.com/Rem0o/FanControl.H...
HWInfo: www.hwinfo.com/download/
Twitch: / onslaugh7pc
0:00 Intro
0:45 Downloading Software
2:24 Extracting and installing
3:33 Opening fan control first time
4:15 BIOS Settings
10:20 Pairing Speed Sensors
12:21 Cleaning Up Interface
14:40 Ramp Rate & Min/Max
17:11 HwInfo Additional Sensors
21:40 Renaming Sensors
22:14 Configure Fan Curves
30:08 Combining Fan Curves
33:14 Import Sensor From File
35:07 Time Averaging
36:25 Delta T Fan Strategy
39:00 Other Settings
39:30 Profiles
40:55 Example Air Cooling
45:50 Example Water Cooling
50:35 Outro - Наука та технологія
Cheers. Had already been using FanControl for a month or so but this helped fill in gaps no one else had covered.
Nice, glad it helped you out
@@onslaugh7pc does it only work on bios and would i lose warranty only because i dont think speed fan works with my laptop
@@nigelphillips7454 No you won't void warranty for doing this
Bro really added kraken x53 support, I’ve been waiting 2 years for this !!! 😅
Thank you very much. Helped a lot. You are the best.
did you test the new update and gpu fan problems?
to anyone having issues eith Vanguard. the inpout sensor for gigabyte motherboards has issues so just do as the video says and import hwinfo sensors
27:26 You can't erase an existing point when you change the max value. Just delete any point in that range and you can lower the max all the way.
Yeah I figured out why it wasn't letting my change it like a week after making this, thanks anyway though.
THANKS MATE FOR THE TUTORIALS
Thanks hope it helped out
Great video, I was having a hard time installing this with random forum posts but this made it easy.
Good to know it helped you out
Good job
!
30:58 very important. I do this with air cooling lol
Tops video. Thank you. I have just installed a new rear exhaust fan advertised as 200-1800rpm, however in Fan Control if I select anything under around 400rpm (about 20%) it stops spinning and goes to 0rpm. But when I calibrated it (in Fan Control), it started working from like 1% and registers the rpms. Any suggestions?
Double check you have Start %, Stop % and Minimum % set to 0%, but it sounds like you do. It is most likely that manufacturer RPM ranges assume perfect 12v input and no resistance to overcome and even then they usually have a 10% tolerance margin. But in the real world you will have some resistance to overcome and you may have multiple fans running off the same header/hub or extension wires etc, that will cause some voltage drop and all these factors will impact the fans minimum and maximum rpm values. Ie the greater the air flow restriction and the lower the voltage the higher the rpm the fan will stall (stop spinning) at.
TLDR 400rpm is mostly likely the minimum RPM your fan will spin at. I wouldn't be too concerned 400 rpm should be pretty inaudible. If you need it to be quieter just let it stop.
@@onslaugh7pc thanks mate. Will look into it a bit more. I've even noticed similar with my GPU, but it could also just have a minimum rpm. Cheers.
😉👍
After the latest update started behaving strangely. It no longer tracks my Gpu sensors even though it was working perfectly before that. Some fans don't display properly at all and have no rpm on them. When I switch to manual mode and try to set it, it automatically switches to 100%, and only when the exhaust is at maximum does it start to return to the setting I gave it. A couple of updates ago it worked perfectly and was a perfect program.
I will update mine and see if I get the same problem. But maybe just delete that config and start over and see if that fixes it
Can i still change fan speeds if fans are only 3-pin? It shows my case fan rpm but manually adjusting the rpm doesnt affect anything.
Yes you can, assuming the motherboard header has variable voltage fan control (most do), you will need to set the fan control to DC mode in BIOS.
Please explain how you create the Stage 2 Folder to add and sum GPU and CPU data sensors 46/47C
Add a "Mix" custom sensor
Discovered yesterday. The program is absolutely top.
I have 2x140 mm Noctua at the front (Y + Low Noise Adapter (voltage is reduced), both on one PWM connection). Unfortunately, Fan Control can't handle this, the Noctuas stop completely at speeds below 50%. I'll probably have to unscrew the computer
You can change the minimum % to 50 so that the fans don't stop, or remove the low noise adapter that will allow you drop below 50% without the fans stopping. Having the fans stop isn't always a bad thing I like to chose fans that stop below a certain pwm signal so that I have the option for them to stop spinning below a set temp, this reduces noise and dust build up when you are just idling.
@@onslaugh7pc Thanks for your answer.
A BQ Shadow Wing 140 mm runs on the back, fan control adheres exactly to the BQ specifications: 50% speed = 450 rpm and can go down to 30%.
For the Noctuas (NF-A14 PWM) at the front I use 2 xNA-SRC7 (low noise from 1500 rpm becomes 1000 rpm): 50% speed = 650 rpm with fan control; below 50% speed massive problems (fan speed fluctuates or they stop completely.
Guess: The NA-SRC7 are the problem + have to go.
Hi very helpful tutorial but i have a one question how to change language ?
Sorry it is English only the dev Rem0o has said that there will not be any plans to add it either. It is just one person working on the program so its understandable.
How do I update it?
Is this compatible with a AMD Graphics Cards? I have a 7900 Xt.
AMD GPU are hit and miss whether is works or not can try the ADLX plugin github.com/Rem0o/FanControl.ADLX
My GPU one won’t pair for some reason. Does it work with AMD GPU?
I am not certain will let you know if I work on something with AMD gpu
plugins aint working for me sadly
And this is why teachers should be paid a higher wage. Great video. Thank you.
Thank you glad you found it useful
does this works for laptops?
I can't really speak for every laptop out there you will just have to give it a try
Ant Esports ICE-621 Dual Tower ARGB CPU Air Cooler
Please review
I am not really a reviewer but I can say it will perform similar to any other 4 heat pipe dual tower air cooler.
Number of heatpipes, surface area and fan power are the main determining factors in an air coolers efficiency.