Toyota 4Runner/FJ Cruiser (1GR) TRD Cold Air Intake Installation - Step by Step
Вставка
- Опубліковано 15 вер 2022
- Video installation of a TRD cold air intake system on 2010 and up Toyota 4Runners / FJ Cruisers.
Part number # PTR03-89100
(comes with the TRD high flow air filter)
www.bamwholesaleparts.com/oem...
(Best Price I’ve found ⬆️)
Make sure to get this part number only, as there are others that will not include the pricey Air filter.
For more detailed instructions on this please do follow the instructions it comes with. Super easy to follow with pictures every step of the way.
Check out some of my must haves, on my Amazon store:
www.amazon.com/shop/vikingsga...
As always, Thank you for watching and thank you for supporting this channel!!
#toyotanation #carrepairs #4runner #trdpro #trdoffroad #diy - Авто та транспорт
Awesome man! You finally got the TRD CAI! Folks don"t know what they are missing....power and fun. Great video!
Yeah, it sounds great now! Thank you 🤘🏻
Love the father-son iteraction. Fun and safe driving, love your videos, Viking, keep up the good work!
I appreciate that 🙏🏻
Thank you!!
Great video! I think this will be the next mod for my 4Runner now.
As for changing out the steps, I really like Victory 4x4's Strike Sliders, and the sliders from Cali Raised are really nice too.
Sweet!
Thank you for the tips, will look into it!
Enjoyed it a lot, it sounds nice after the tune up. Nice detail on the Little guy.
Obrigado Irmão, grande abraço para ti!
I’ve done an S&B on an SR5. Made the exact same same sound too and high end power was a bit more peppy.
Now we have a TRD OR and have a Flowmaster flowfx on it, looking for a second hand CAI again lol the s&b was second hand too and worked just fine
I have an S&B as well. Have had them on several vehicles and have been happy
This is about to get ordered and put on my trd pro. Looks great compared to the stock air box. Thanks for the video
Hell yeah!!! Your welcome!
What does adding this do ?
Looks fantastic!!
Thanks for the review! Regarding the old gray plastic trims, you can use Rustoleum Trim & Bumper paint to refresh it.
Your welcome, thank you for the tip!!
Nice video ..your runner is looking cool. Next time you are at autozone or even walmart... grab a continer of back-to-black and tackle the black plastic.. a little rubbing but it works. Had used it on a previous vehicle with decent luck. Until next time.. Rock on.
I appreciate you 🤘🏻
Will do!!
Best in biz nailed it again 👏 korngrats 👏 👌 🙌 👍 😀 😄
😀👍🏻👍🏻
Nice! Great video
Thank you, I appreciate you!! 🤟🏻
Take 1 of the mud flaps off and hit it with your heat gun. Ive done the fender flairs on my Jeep and worked perfect!
Plexus Plastic Cleaner for the trim, stuff is magic in a spray can.
I appreciate the tip, will give it a go. Thank you!!
You can use Back to Black on the top of the rear bumper thats faded, give it a go. It wont ruin the paint or anything also so no worries there.
It’s funny you mentioned that, I bought it (back to black) a few months ago.
Keep forgetting to do it. 😅
Thank you for the heads up 😉
VERY NICE!
Thank you!
Meguiar's, ultimate black, is pretty good.
Thank you, will most definitely check it out this weekend!!
Cheers!!
Great job!! I did the same mod and like 👍
😉👍🏻
Where did you get the trail embelms?
Somewhere in Etsy, can’t remember.
Just search Trail Emblem, should show up.
Nice 4Runner
Thank you!!
Think hardly about changing out the steps. Most sliders are horrible steps and I’m sure the wife and kid appreciate a nice step to get into the truck (especially after the lift).
Secondly, I’d recommend an aluminum roof rack. Living in the northeast is rough on even powder coated steel but aluminum seems to do quite well. I went with Sherpa primarily for their rubber mounts but there are other aluminum racks available.
I appreciate the tips, will consider them. I don’t know everything and you just made some great points. Thank you for watching!!
I deleted the running boards on my '19 4Runner. Much easier to get under it now..stock suspension.
I bet it is!! 👍🏻
Good luck 👍
Thank you!
Bro, use CERAKOTE on the black trim n mudguard.
Big big difference.
I hear you, I got to make some time for that. Thank you for the reminder!!
‘S’ is NOT sport mode…it’s ‘sequential’ and allows you to set the top gear the transmission will go to (ie: if you shift to 3 it won’t go into 4th or 5th).
Use a heat gun to remove the white residue on your plastic rear bumper
👍🏻
Love the video! I have a quick question. with the last 4 Toyotas 12 Tacoma 13Corolla 20 Runner and 22 4 Runner when all are brand new they all were overfilled in the coolant overflow bottle then slowly over the next 1-2 years the coolant will usually settle in the middle of the bottle. Where does the coolant go? Thank you
You know, this is an excellent question.
Quite a few years back, I asked an instructor in school (Toyota) the same exact question.
His answer was a speculation but not based on facts either. He believes and so do I that in order to make the Toyota coolant long life, they had to use “components“ that will with time, very slowly evaporate.
No one from the inside has ever confirmed this or denied. 🤷🏼♂️
Either way I appreciate you watching!!
looks good. thanks
👍🏻
Give RCI rock sliders and roof rack a look. You might be pleasantly surprised.
I sure will, thank you for the tip.
@@VikingsGarage I forgot to mention, this has gotten me to install this. I've been thinking about it for a while. You drive men to insanity, but in a good way. :)
😉🤟🏻
For the trim in the back try Ceracote trim wipes. Awesome product. I used them on my 2016 ltd
By the way what’s the benefit to the intake? Is it better mileage? HP?
Appreciate your tip. Honestly I installed it because it dresses up the engine bay a little 🤣🤣
I heard it’s actually better on the MPG, not to mention it sounds great when you step on it!
Looks great!
Thank you!!
Cerakote Trim Coat for your trim
Love that stuff. Works great.
I’ll definitely give it a go. Thank you guys!!
Hi, I appreciate your efforts. Could you provide the air filter part number?
Great vid, thanks! A couple of questions... Would this mod void any parts of the factory warranty on my newly aquired 2022 4Runner with ~2000 miles on the clock?
Are the low restriction air filters that fit the new box readily available?
I'm loving the new ride and the VIKINGS garage!
I appreciate your support!! Thank you.
Should not void your warranty, often times you have to order that filter. Dealers do not stock it.
the main problem is people over oiling the washable filters, and that oil being sucked into the intake and messing things up. i would call your dealership first and ask. imo its not worth it, stick to the cheap filters and replace them often.
Nice - did you have to separate the wires in the wire loom for the MAS airflow sensor to reach under the tube?
I did not, just re-route them.
Great video, thanks. Just followed your vid to do my install. I noticed the top cover doesn't exactly completely seal - I can still see the edge of the red filter between the top and bottom cover. Did your top cover close and seal completely? Looks like some dust may be able to get into the box? Thx
It does close completely, although the top edge of the filter is ever so slight visible.
@@VikingsGarage Awesome thanks.
Gorgeous rig!! Plastidip the running boards??
Thank you. Not a fan of plastic dip at all.
Oem rock rails , bolt to frame
Do you know which year and model was if on?
Or do you have part numbers?
Much appreciated
I have a question, I have an 2020 sr5 and was wondering if the electronic terrain select will plug into my existing overhead console plug (I noticed some unused pin connectors and wires) and will it work? I’ve ordered one used. Didn’t know if you had any idea on the swap.
I’ll be honest, if you can, I never heard of it. Curious to know. 🤷🏼♂️
@@VikingsGarage I’ve tried to find someone who has but no luck. I’ll let you know.
Is it possible to just buy the TRD intake tube red couplings and attach to factory intake box?
Not to my knowledge.
Serious remedial question... Does the MPG improve? 1-5 HP improvements aside, I'd think improved airflow (in and/or out) would do something positive.
you actually lose about 1 mpg
How does this differ from the stock box? Wouldn't just a TRD air filter get the same results?
Interesting point.
I can confirm that the intake hose is solid on the TRD VS OEM which is flexible rubber.
Nice mod bruh! Where's the link you bought it from? Sorry if I missed.
I didn’t post a link but check them out:
www.bamwholesaleparts.com/
Best prices on the net.
Cheers!!
Nice, did it affect your fuel consumption mpg?
It did affect it a tiny bit.
Does a cold air intake increase fuel consumption in an already thirsty engine?
This high flow air intake system, will only increase the fuel consumption if you drive it hard. If you drive it normal it’s actually in my opinion more fuel efficient then the OEM stock one.
@@VikingsGarage thanks, I subscribed to your channel; I just bought a 40th Anniversary Edition ‘23 (it’s really a SR5 Premium, I think) and am using some of your tips.
Much appreciated 🙏🏻
Congratulations on the new ride, Enjoy!!
I'm only slightly confused. Toyota parts advises this part # won't fit a 2023 TRD Pro, however another site says it will fit all the way up to a 2023. I don't see how it can't fit mine, nothing's changed. Any advice?
It is confusing for no reason. It fits all the way to 2024 👍🏻
@@VikingsGarage thank you!
Got mine in today!
🤘🏻👏🏻👏🏻
@kokifreedom3563 did it work? The link viking has shared says it fits only a 2012 4runner!
Where did you buy the intake ?
www.bamwholesaleparts.com/
I looked on the Toyota parts and cannot find this for my 2022 Off Road Premium. Is the part number the same and they maybe just have not updated the site ?? I'm asking because i know you have some inside knowledge of what fits what properly ... I'd like to do this mod since it does add a smidge and anything is better than nothing :- ) Looks great !
They all have same part number PTR03-89100
@@VikingsGarage Awesome thanks. Any dip in MPG noticed or pretty much the same ?
It’s about the same.
What year is this 4Runner?
2015
Any MPG gain with this?
Some claim so, it’s to early to tell. But
I Will keep you guys updated.
I heard you get more SPG
Lol smiles per gallon
That’s a fact 😁🤟🏻
How much did that run you?
About $360 thru:
www.bamwholesaleparts.com/
@@VikingsGarage thanks dude 🤙🏽
Don't use the TRD filter itself. It let dust through
Noted, thank you!!
if you have an round tube intake filter... I believe its not CA state legal...kinda lame
Yeah I’m not sure, but does sound lame. 🤷🏼♂️
I miss the extra grunt from the TRD intake. Unfortunately, I had to remove it as I noticed I somehow caused the upper filter housing pipe section to crush causing ingress to get in. Might have to 3D print some caps to just remove the sound baffle system.
ua-cam.com/video/6avqCEGfwKQ/v-deo.html
Interesting!!
Most TRD stuff is just RTRD
RTRD ???
@@VikingsGarage retarded I believe is what they are trying to insinuate.
Gotcha!! To each their own, right!
It really doesn't make any difference.
Did you have to alter the wire harness for the new install
I did not.