I don't send out my cylinder or casesings I luv that juju but pressing the conrod 🤔its hello engineering shop...a swirl in every port/this is the way 👌
@@2strokerides oh, I think I meant something else then. Like a air intake on the bike, so that it can suck more air the faster you go. Typically fitted on/through the front fairings
@@Subliminal3117 yeah the bike has this allready from the factory. I took it off in the thumbnail of the video. There is a hole in the front fairing where the air goes through
I don't send out my cylinder or casesings I luv that juju but pressing the conrod 🤔its hello engineering shop...a swirl in every port/this is the way 👌
Looks like a lot of work. Good job!
How nice, good job.
Do a ram air intake on it🤑
Thanks!!
These bikes allready come with a ram air intake from the factory :)
@@2strokerides oh, I think I meant something else then.
Like a air intake on the bike, so that it can suck more air the faster you go. Typically fitted on/through the front fairings
@@Subliminal3117 yeah the bike has this allready from the factory. I took it off in the thumbnail of the video. There is a hole in the front fairing where the air goes through
@@2strokerides is it only the old model that has that then?
@@Subliminal3117 yeah the model that was build untill 2005. The model after that got rid of the ram air intake I think
Main jet probably to lean happened on wide open throttle
@@darren2935 nope. Not enough piston to cylinder clearance so it seized when the piston became hot from wide open throttle
@@2strokerides fair play well done pulling it apart and putting back together do you know what compression you had after rebuild and 28 or 34mm carb
@@darren2935 thanks. Don't know man sorry. I run 28mm carb