I cannot thank you enough for this. I’ve searched far and wide for a 3x3 design as my usual base designs features 3x3 staircases between multiple floors. I’ve always wanted to implement a 3x3 elevator instead, but there’s never been a proper design due to the differences in redstone properties on bedrock… either it doesn’t work or you get inconsistencies. However with this, all that changes; and for that, I thank you. Awesome.
@@Akimitsu64 only having one issue though, my two-way wire seems to be a one-way wire. I can only call it from the top, calling from the bottom is breaking the elevator altogether. Any tips?
@@unclechronic2098 yeah my fault, my two way mire is really bad 😅Try using two separate wires instead I can joun your world and help if you like :) My Gamertag is applecraftart64
Complete redstone novice here, the best I've done were button/pressure plate iron doors. I was easily able to follow this guide and build a nice 3x3 elevator for my mountain base! Thank you so much for the guide!
@@ibfarway6517 yeah you’re right! the shorter elevators are much more annoying. First check 9:09 Because I made a mistake with that piston too (aha sorry) But if you can, I’d make the elevator have at least a 20 block gap between the top and bottom floors. Do you have a two way wire? Removing those wires can let the elevator be shorter without issue Let me know how it goes! And good luck!
Appreciate the videos, I had troubles at first going down but that's because I set off the observer while building the top but In the end I got it and it's a nice addition to my survival base thank you.
this actually works on the newest Java edition with the catch that you cannot "stack" the redstone the way he does it (when he placed the green stained glass and put redstone on it) you have to do a spiral and this doesn't really matter of your elevator is short but when you're making a longer one, the more redstone that you need means the the signal gets weaker at a shorter height. I don't know how much worse the signal is because my elevator was really short. Also of the two "non-stick"blocks used in the video, only glazed terracotta works as a "non-stick" block I do not know if the glazed terracotta is the only one, but quartz did not work for me. So if anyone wanted to do this in java, you can, but you need to make some modifications to the design
WOW! Thanks for letting me know! 😃That’s awesome! Only the 2 way wire is different, and Java has more decoration options for the elevator shaft as far as I can tell. Yeah Quartz IS movable on block, not non-stick. Some “non-stick” blocks are: Leaves, glazed-terracotta, obsidian, or Jack O’lanterns (Java & Bedrock) Thanks again Dude! 😊
I just tested and the reason it was going up only one block is because people were using other blocks like stone. I used stone and broke the blocks around the elevator platform and it worked
Yess! Thanks! I’ve been puzzling over that for a while and I noticed a drop in those issue comments after I told people “don’t let it touch stone” haha. I hope your advice reaches everyone :) You mean the top platform, right? 🤔
So I've got a problem. When the platform goes up it stays but when it goes down the slime goes one block up and the honey goes 1 more block higher then the slime one I need help so I can build it on my smp
That must be frustrating, I think you probably need to check your repeaters to the catch arms are facing the right way is all (and on max delay) Did you want to connect discords still? I hope it goes well!
i dont know what im doing wrong but i built it in a realm and when trying to use the call button the catch arms at the top will sometimes break and the blocks will try to go up instead of down
Realms are awesome! How many people do you play with? That break is usually because the signal isn’t reaching far enough. Try and add one more two-way repeater closer to the top (The call buttons are the most difficult part, I’m doing something much easier for call buttons in my future tutorials)
Hello! in version 1.20 I want to make my base from mechanisms, and you gave me an idea, and I gratefully subscribed to you bro!!! thanks for the tutorial!
I have a big problem… I build everything perfect up the slime and the honey dont tuch any blocks. When i start the elevator they go up one block than back down the one block and then goes fully up but on top when i want to drive down the elevator only goes up and than it breaks. Pls help me what can i do ?
hi there, Going up like that is normal, but Double check your repeaters at the top, and that there was glass underneath the honey on the platform at 7:34 so that it can go down. Have I helped? Also if it’s too hard then I recommend using this easier tutorial instead ua-cam.com/video/IkOdbZFTI4g/v-deo.html
Ok I made the elevator but I have a problem, when the elevator goes up, the honey blocks, go a bit further than the slime blocks, making honey side of the platform, one block higher than the slime block side of the platform, the honey blocks catch on to the (quartz block that stops the elevator ) and brings it with it🤔. I hope that made sense 🤗
Hiya, yeah that makes sense Did you remember the two glass beneath the honey from 7:37? Unfortunately you’ll have to rebuild the flying machine with the glass and platform but that should fix it I hope this helps! If this design still doesn’t work out I have an easier one to try ua-cam.com/video/IkOdbZFTI4g/v-deo.html
Glazed terracotta is needed because it doesn’t stick to honey or slime 7:15 don’t forget the 2 glass beneath the honey I can help anyone who asks for help :) I’ll make a bonus video about how to fix problems and a better explanation of how the elevator works v soon I have 3 new Minecraft videos on their way when they’re ready
did you ever find the solution for it only going one block up and stopping? i made this in a test world and it worked just fine but when i remade it in my actual world it did the one block thing
@@epicsoniclover1994 Best thing is to check is 1st check your observers compared to the video. They need to face into the top slime blocks BEFORE being pulled down 1 block to launch, 2nd make sure you have obsidian underneath your elevator before pressing your button. 1:22 the last person who had this issue had stone floor next to the elevator, so it got stuck on some slime and stopped the elevator. If it’s the same for you just make sure there is ONLY glazed terracotta next to the elevator shaft (no stone or movable blocks nearby) and you’ll be ok I’ve remade my elevator 8 times in creative and twice in survival and after some fixing they worked each time for me, so I can only recommend double checking everything for now I made mistakes too a few times aha so I’ll try and remember what I had to fix when I had this issue Sorry that’s a lot of words, I’ll come back when I can answer better , addios
@@Akimitsu64 i’ve rebuilt it about 4 times, checked every observer, made sure it matches the video entirely, still no luck :/ depth doesn’t affect it, does it? i’m building it like right at bedrock level
@@Akimitsu64 after some more checking i think the issue is that the bottom sticky piston just refuses to pull the observer down for some reason, there’s nothing connected to it or anything, my only guess is the slime is stopping it because it extends and everything but can’t pull it back down
@@epicsoniclover1994 if there is stone touching it underground that will break it, otherwise I think I can only recommend you use a different tutorial, sorry I can’t help
Like the other guy, mines only goes up a block and that's that, nothing I don't wrong, but MAYBE JUST MAYBE I could've done something wrong with the repeaters? Or if any normal pistons are in the machine, I thought they were sticky pistons. But idk, it seems I did everything right. If you want pics u can ask for my disco if u want.
No that won’t work unless there is a gap around the elevator. With a gap you can use any block! Up to you Leaves are unmovable, and see-through ish and can touch the elevator without breaking it! Jack O’lanterns, glazed terracotta or obsidian are some stone alternatives. Maybe try a texture pack? Sorry decorations are limited
I cant even get my elevator to move up more than one block. I did everything right; I double checked and triple checked that I followed all of the steps, but every time I push the button to go up after watching part 1 and following everything, the honey block and the slime block formation detaches from the machine after the pistons push it up a block. It doesn't move up after that. It gives up lol. I'm in Bedrock Edition on a Windows 10 computer, so that's not the problem. I have no clue why it won't move up when I followed all of the steps to a dime. I didn't even replace the blocks with other unmovable blocks, I used obsidian the whole way through. Nothing has worked, so I aquire some assistance.
That is really very strange. Can you send me pictures? I have instagram if that helps (link on profile) I can check for you then If you have built it properly then I don’t know what’s happened mate, but I’m impressed by your perseverance
@@Akimitsu64 No I didn't, I built it completely above ground. Thanks for trying to help, turns out I didn't need an Elevator at all for my puzzle map... I can just use the Teleport command lol 😅
@@RokudoShorts that’s ok. Ooo What type of puzzles are you making?? Do you mind sending me a picture anyway if you still have any? Again, it’d be useful for me to know -thanks!
@@teamsummon5199 after some testing I think the 7x7 is next to impossible. However a tutorial for a 6x6 elevator is coming by August on my channel :) Stay subscribed for it! What do you need it for btw?
OMG! It is possible!! It took forever but I have finished our 7x7 elevator! 🎉🎉 I can even make a 10x10 one now! I can’t make a video right now because I have covid, but it’ll be out as soon as I feel better! :)
It worked great but after the new update came out it does not want to work does everyone have the same problem if so any tips to fix this I really do not want to redo everything
I hear a few people say this, I have a new design linked here: ua-cam.com/video/IkOdbZFTI4g/v-deo.html and you only need to rebuild the top floor So skip to 2:55 Hope this helps!
@@Akimitsu64 at first it did went down but when I tried to press it to go back up it clicks but there's no movement it's basically stuck on bottom level trying to go on the top level
@@marvinsotelo wow that’s super unusual, are you able to get in touch on discord? I’m akimtsu#6471 it would be really helpful for me to see a screenshot
My elevator is not going down. I'm stuck on part 3. I double checked everything and swear everything is the exact same as you did it. If I take out the obsidian at the top the top bit of the elevator moves up but everything else stays. Is there anyway I can fix this? It looks like everything's working it just the actual elevator isnt being triggered. That's what it looks like to me at least. I have also made a shaft but I used terracotta. Please help me fix this
Hi, do you have discord so I can take a look? I’m akimitsu#6471 Did you have the 2 blocks underneath from 7:30 ? Alternatively here is an improved elevator design: ua-cam.com/video/IkOdbZFTI4g/v-deo.html Good luck! :)
There are two holes left above the honey blocks when adding an elevator shaft (5:34 and 9:17). Is there any way to fix this? Works otherwise, just visually annoying.
Yeah the two way wire has broken due to a comparator bug added a few months ago I’m afraid, yeah using the new tutorial will help you out with that. Where were you putting the terracotta specifically?
Good question! A Stone buttons press lasts 1 second, wooden buttons presses last 1.5 seconds. Weirdly half a second really helps the elevator be more reliable. If you use stone there is a small risk it breaks at the top platform
Hey, I’ve made it past the elevator part, I’m on the calling in, I can call it up from the top but can’t call it down from the bottom when the glass transitions to type comparator it downs activate it’s a block down from it
The 2 way wire is the hardest part I’m making a new video about it I caught covid recently so I don’t know when it’ll be released Also After you said glass I don’t understand your comment For now I can only wish you good luck Orrrrr: Plan A Place a lever at the top (to activate the same part the top button does) Then go down 2 way wire and find where the signal stops and fix it there (if you can) Plan B Make 2 wires, one from base to top, one from top to base. No comparators, just repeaters. But avoid a feedback loop! This is a better option I wish I’d used in the tutorial for it’s simplicity (risk is everything goes crazy - test before use)
Great tutorial, unfortunatelly my elevator isn't as high AS yours. Everything is working fine but the two way wire. I can call from top, but whenever I call from bottom the elevator is damaged. Any ideas?
Yes that would be very cool! 😎 Thanks for the idea NazGamerz! edit: I have made a 4x4 elevator! It is much more difficult than the 3x3 but a tutorial will be out by August! (I’m recording and editing one video a week soon) This challenge helped me make a 7x7 and 10x10 elevator too, without your suggestion I wouldn’t have thought them possible! So thank you 😄
If you reply I would appreciate it so much because I have been trying to get this to work for over 3 hours! The first bit works fine it stops when it gets to the top with no obsidian but when I press the button to go down it just continues to go up and just breaks! I have tried every I can do you think you know what the problem might be because I have watched this video about 20 times double checking every thing is right I’m just so lost now the only time I can get it to go down again is by putting obsidian at the top so if you have any suggestions I would appreciate it loads!!!
Hi, could you get in touch on discord? I’m Akimitsu#6471 it sounds like the timings are just a bit off. If you can send pictures of what you’ve made that will be super helpful!! I’m amazed you’ve persevered super well! It’s 1am in my local time so I’ll get back in touch later mate
@@kbrockin417 either works :) my xbox gamertag is ApplecraftArt64 if you’re happy to invite me. I’m unavailable later today as I have a work shift. But I’m available most of next week to join
That’s ok, I got it wrong first time too aha. Are you asking me join the world you’re using? My gamertag is ApplecraftArt64 if that helps, send me an invite and I’ll help out :)
@@justsomeguy1375 can you get in touch on discord? I’m akimitsu#6471 I’d like to see pictures so I can help better. It sounds like you got the timings wrong for the catch arms, orr it’s getting stuck on something else
So made the whole thing but comming to a problem in the end of it where the recall set up ends up turning into a solid signal. So not sure what im doing wrong but other than that the Elevator works perfectly! so trial and error till i figure it out
It’s ok you made it perfectly! But there is a comparator glitch in the latest update making that happen to the call buttons, I’m gonna make a short video about it and how to fix it soon
@@Akimitsu64 Dang I’ve been noticing it more and more with some of the current builds I end up logging back on my buddies realm and some of the stuff I gotta resettin but honestly don’t mind cause it keeps me fresh with the patterns. But with the elevator gonna jus end up leaving the recall set up jus cutting it off for the time being till the update is live! I appreciate the feed back as well my dood!
@@Akimitsu64 Definitely ! i jus got back into Mc again cause i got rid of my xbox a few years ago but my buddy kept our world going so now in my absence it's time to put in my work! if you have a insta i can send pics of our 4+ Survival world
@@Hyyl2Wooden buttons work. You must’ve got something else wrong. I can help if you get in touch on discord I’m Akimitsu#6471 This works on any update of Minecraft since honey was added, doesn’t matter what Xbox
If you don’t want to use obsidian you can use a three block tall pillar instead for each side- that’s enough to stop the elevator in the same place without obsidian :)
Hi, not a dumb question! No it doesn’t have to be stained. For the 2 way wire any glass will do 😀 they’re the cheapest material that works (don’t use slabs of any kind tho)
Yes I made one over a year ago. This is the only tutorial for now: Multi Floor 3x3 Elevator Minecraft challenge! ua-cam.com/users/shorts7_mtgGQ1RmQ?feature=share
I’m in the process of making it now, and i see the comments of the possible problems, have they been worked out? The ones I hear about are the elevator only moving one block. Currently I am building mine underground in a cave going upwards so I am just seeing if I need to change anything before I fully build it and find it to not work haha.
Caves are risky, are you making an elevator shaft? If the elevator touches stone, it’ll stop- so your elevator shaft will need stained terracotta instead or a one block gap around it for it to move freely (because stained terracotta doesn’t stick to slime or honey) I’ve not solved the one block issue mystery yet, but I’m trying to recreate the problem on my test world now Until I find the issue, just be careful and check the observers are in the right places as they’re the most important part :) good luck!!
@@Akimitsu64 well, my buddy got onto our realm after I had finished the bottom and put down the button. The top of the cave hasn’t been dug out yet and his curious self pressed the button. To my surprise I see the elevator at the top of the cave! So, it works! I am currently rebuilding it and doing exactly the same thing.
@@lambilly6568 🤦♂️ No. Don’t use a t-flip flop with the elevator! It will break. Whyyyy do you want to add a T-flip flop???? I know T-flip flops work with buttons, but they’re totally useless in my elevator
Hey im sorry to say but this no longer works i tried it before and it did it was great but it no longer works if you could come out with a new one that would be mighty fine
Thanks but It is working perfectly for me still. If needed, try rebuilding. I’m making a better 3x3 tutorial anyway but that’s to prepare for my multi floor elevator video
@@cpr92 I wish I could show you a picture of what I did or, better yet, there was a place to show 3-D exports of builds because that would be so much easier than text. :/ Basically, I had to use two lines of redstone and repeaters, one going from the bottom button to the top and another running the power from the top button down to the bottom. This comes with a problem though, or, at least for me it did. So say your elevator is on the top and you're at the bottom. When I ran the lines close to one another, both the redstone line up to the top and the line to the bottom were powered and it broke the elevator. What I did was placed more dust until I found the sweet spot where the bottom button's redstone only had enough power to hit the repeater of the redstone line going up to the top and the top button's only had enough juice to reach the repeater of the line going down. Hopefully that makes sense?
@@cpr92 Hi everyone! I have a smaller and easier Elevator design with working call buttons here if you’re interested: ua-cam.com/video/IkOdbZFTI4g/v-deo.html hope this helps everyone out! Also Merry Christmas!
Nope! :) they can go for hundreds of blocks up and down if you choose! (minumum is ~10 blocks between stations/floors) This elevator only has two floors though if you want more floors, then Check this out ua-cam.com/video/b0eLy6MyWQc/v-deo.html
cool design but hated the part where you constantly fucked it up and then didnt edit it out, even tho i know you know how to edit, so you chose to just leave it in.
I cannot thank you enough for this.
I’ve searched far and wide for a 3x3 design as my usual base designs features 3x3 staircases between multiple floors. I’ve always wanted to implement a 3x3 elevator instead, but there’s never been a proper design due to the differences in redstone properties on bedrock… either it doesn’t work or you get inconsistencies.
However with this, all that changes; and for that, I thank you. Awesome.
That’s really sweet bro! I’m super glad you like it 😁
@@Akimitsu64 only having one issue though, my two-way wire seems to be a one-way wire. I can only call it from the top, calling from the bottom is breaking the elevator altogether. Any tips?
@@unclechronic2098 yeah my fault, my two way mire is really bad 😅Try using two separate wires instead
I can joun your world and help if you like :) My Gamertag is applecraftart64
Complete redstone novice here, the best I've done were button/pressure plate iron doors. I was easily able to follow this guide and build a nice 3x3 elevator for my mountain base! Thank you so much for the guide!
😊 That’s amazing to hear! You are very welcome! Glad I wasn’t confusing 😂
Yes! Another cool guy in the team 😎
@@Akimitsu64 hello i had a question does it matter if the elevator is shorter than the one you used in your tutorial
@@Akimitsu64 because mine was shorter but constantly messed up at the honey block piston for the top floor that activates the bottom observer
@@ibfarway6517 yeah you’re right! the shorter elevators are much more annoying.
First check 9:09 Because I made a mistake with that piston too (aha sorry) But if you can, I’d make the elevator have at least a 20 block gap between the top and bottom floors.
Do you have a two way wire? Removing those wires can let the elevator be shorter without issue
Let me know how it goes! And good luck!
It's hard to make a elevator but it's ten times harder to hide all of it 😂
Truth! Ahah
@@Akimitsu64 even If you manage to hide all of it, you'll still see the honey blocks inside the shaft
@@deadmercy3113 yeah, there is no way around that unfortunately
I just recommend building the machine before you start building around it.
Appreciate the videos, I had troubles at first going down but that's because I set off the observer while building the top but In the end I got it and it's a nice addition to my survival base thank you.
Your welcome 😊
this actually works on the newest Java edition with the catch that you cannot "stack" the redstone the way he does it (when he placed the green stained glass and put redstone on it) you have to do a spiral and this doesn't really matter of your elevator is short but when you're making a longer one, the more redstone that you need means the the signal gets weaker at a shorter height. I don't know how much worse the signal is because my elevator was really short. Also of the two "non-stick"blocks used in the video, only glazed terracotta works as a "non-stick" block I do not know if the glazed terracotta is the only one, but quartz did not work for me. So if anyone wanted to do this in java, you can, but you need to make some modifications to the design
WOW! Thanks for letting me know! 😃That’s awesome!
Only the 2 way wire is different, and Java has more decoration options for the elevator shaft as far as I can tell.
Yeah Quartz IS movable on block, not non-stick. Some “non-stick” blocks are: Leaves, glazed-terracotta, obsidian, or Jack O’lanterns (Java & Bedrock)
Thanks again Dude! 😊
You’re awesome man!!! Thank you for the video!! :)
I love elevators, and this is one of the best I ever saw
I just tested and the reason it was going up only one block is because people were using other blocks like stone. I used stone and broke the blocks around the elevator platform and it worked
Yess! Thanks! I’ve been puzzling over that for a while and I noticed a drop in those issue comments after I told people “don’t let it touch stone” haha.
I hope your advice reaches everyone :)
You mean the top platform, right? 🤔
Omg tysm I was about to give up before I saw this!
@@MolokoStuff i gave up i saw this after i broke everything 😢
Bro is not work other block build you block and not work I build 2week and is broke 😤 I'm so Mad is not word Wtf 😤
So I've got a problem.
When the platform goes up it stays but when it goes down the slime goes one block up and the honey goes 1 more block higher then the slime one I need help so I can build it on my smp
That must be frustrating, I think you probably need to check your repeaters to the catch arms are facing the right way is all (and on max delay)
Did you want to connect discords still?
I hope it goes well!
@@Akimitsu64 thanks 👍 it works now
Works amazing. Thank you so much for a great tutorial!!! 👍🏻👍🏻👍🏻
i dont know what im doing wrong but i built it in a realm and when trying to use the call button the catch arms at the top will sometimes break and the blocks will try to go up instead of down
Realms are awesome! How many people do you play with?
That break is usually because the signal isn’t reaching far enough. Try and add one more two-way repeater closer to the top
(The call buttons are the most difficult part, I’m doing something much easier for call buttons in my future tutorials)
Hello! in version 1.20 I want to make my base from mechanisms, and you gave me an idea, and I gratefully subscribed to you bro!!! thanks for the tutorial!
I have a big problem…
I build everything perfect up the slime and the honey dont tuch any blocks.
When i start the elevator they go up one block than back down the one block and then goes fully up but on top when i want to drive down the elevator only goes up and than it breaks.
Pls help me what can i do ?
hi there, Going up like that is normal, but Double check your repeaters at the top, and that there was glass underneath the honey on the platform at 7:34 so that it can go down. Have I helped?
Also if it’s too hard then I recommend using this easier tutorial instead ua-cam.com/video/IkOdbZFTI4g/v-deo.html
Awesome tutorial and Elevator! Its just really hard hiding all the Redstone lmao
Ikr? Haha
Ok I made the elevator but I have a problem, when the elevator goes up, the honey blocks, go a bit further than the slime blocks, making honey side of the platform, one block higher than the slime block side of the platform, the honey blocks catch on to the (quartz block that stops the elevator ) and brings it with it🤔. I hope that made sense 🤗
Hiya, yeah that makes sense
Did you remember the two glass beneath the honey from 7:37?
Unfortunately you’ll have to rebuild the flying machine with the glass and platform but that should fix it
I hope this helps!
If this design still doesn’t work out I have an easier one to try ua-cam.com/video/IkOdbZFTI4g/v-deo.html
Thanks
Think you so much 🥰🥰🥰
Glazed terracotta is needed because it doesn’t stick to honey or slime
7:15 don’t forget the 2 glass beneath the honey
I can help anyone who asks for help :)
I’ll make a bonus video about how to fix problems and a better explanation of how the elevator works v soon
I have 3 new Minecraft videos on their way when they’re ready
did you ever find the solution for it only going one block up and stopping? i made this in a test world and it worked just fine but when i remade it in my actual world it did the one block thing
@@epicsoniclover1994 Best thing is to check is 1st check your observers compared to the video. They need to face into the top slime blocks BEFORE being pulled down 1 block to launch, 2nd make sure you have obsidian underneath your elevator before pressing your button. 1:22
the last person who had this issue had stone floor next to the elevator, so it got stuck on some slime and stopped the elevator. If it’s the same for you just make sure there is ONLY glazed terracotta next to the elevator shaft (no stone or movable blocks nearby) and you’ll be ok
I’ve remade my elevator 8 times in creative and twice in survival and after some fixing they worked each time for me, so I can only recommend double checking everything for now
I made mistakes too a few times aha so I’ll try and remember what I had to fix when I had this issue
Sorry that’s a lot of words, I’ll come back when I can answer better , addios
@@Akimitsu64 i’ve rebuilt it about 4 times, checked every observer, made sure it matches the video entirely, still no luck :/ depth doesn’t affect it, does it? i’m building it like right at bedrock level
@@Akimitsu64 after some more checking i think the issue is that the bottom sticky piston just refuses to pull the observer down for some reason, there’s nothing connected to it or anything, my only guess is the slime is stopping it because it extends and everything but can’t pull it back down
@@epicsoniclover1994 if there is stone touching it underground that will break it, otherwise I think I can only recommend you use a different tutorial, sorry I can’t help
Great video man, can I have a suggestion? Can you make a 5x5 elevator? I need for my Bank Heist map. Anyways, keep up the good work man!
Thanks so much bro 😊
And a 5x5 is coming soon…
(Design ready, I’m recording it soon)
Thank you it’s still working and I bout it on PS4
Like the other guy, mines only goes up a block and that's that, nothing I don't wrong, but MAYBE JUST MAYBE I could've done something wrong with the repeaters? Or if any normal pistons are in the machine, I thought they were sticky pistons. But idk, it seems I did everything right. If you want pics u can ask for my disco if u want.
It might be cause I'm on 1.18.32 but maybe not, I'll update and check when I can.
@@ቿክጋዐሃሃዐሁዪነፕልሃ I doubt it’s the update, yes please!! My discord is
Akimitsu#6471
I’d love to know how to help everyone or if I got my video wrong aha
@@Akimitsu64 I'm BigfootJinx#3954, I'll try to message you and send screenshots, I'll get mc updates and take screenies
@@Akimitsu64 ive sent a request so I could message
Great design but i did have to renovate a little part of my base to fit the stacky thing, other than that, really good!
Sorry about your base renovation, I’m glad it works well :) I have a smaller version ready, I’ll upload soon
Mmmm thanks scrumptious I LOVE MINECRAFT!
Like the flooring wood surrounding it and a random block in the middle?
Absolutely! The elevator platform can be made of any movable block, so patterns and decorations work (don’t make patterns with TNT though aha 😅)
Can you add a shaft made out of glass or stone or something or would the touching blocks break it
No that won’t work unless there is a gap around the elevator. With a gap you can use any block! Up to you
Leaves are unmovable, and see-through ish and can touch the elevator without breaking it!
Jack O’lanterns, glazed terracotta or obsidian are some stone alternatives. Maybe try a texture pack? Sorry decorations are limited
I cant even get my elevator to move up more than one block. I did everything right; I double checked and triple checked that I followed all of the steps, but every time I push the button to go up after watching part 1 and following everything, the honey block and the slime block formation detaches from the machine after the pistons push it up a block. It doesn't move up after that. It gives up lol. I'm in Bedrock Edition on a Windows 10 computer, so that's not the problem. I have no clue why it won't move up when I followed all of the steps to a dime. I didn't even replace the blocks with other unmovable blocks, I used obsidian the whole way through. Nothing has worked, so I aquire some assistance.
That is really very strange.
Can you send me pictures? I have instagram if that helps (link on profile) I can check for you then
If you have built it properly then I don’t know what’s happened mate, but I’m impressed by your perseverance
Did you build yours in a cave btw?
Also if my tutorial was unhelpful
Then maybe try ua-cam.com/video/b0eLy6MyWQc/v-deo.html for a 2x2 elevator instead
@@Akimitsu64 No I didn't, I built it completely above ground.
Thanks for trying to help, turns out I didn't need an Elevator at all for my puzzle map... I can just use the Teleport command lol 😅
@@RokudoShorts that’s ok. Ooo What type of puzzles are you making??
Do you mind sending me a picture anyway if you still have any? Again, it’d be useful for me to know -thanks!
Dude thanks for making this, you don’t think you can make an elevator that is 7x7? I’ve been looking for one that works everywhere
I have a 6x6 elevator already, and you’re welcome 😊 7x7 is possible but awkward, I’ll see what I can do - is it a tutorial you’d like?
@@Akimitsu64 ya a tutorial is what I need
@@Akimitsu64 also where is the 6x6 video at
@@teamsummon5199 after some testing I think the 7x7 is next to impossible. However a tutorial for a 6x6 elevator is coming by August on my channel :) Stay subscribed for it!
What do you need it for btw?
OMG! It is possible!! It took forever but I have finished our 7x7 elevator! 🎉🎉
I can even make a 10x10 one now! I can’t make a video right now because I have covid, but it’ll be out as soon as I feel better! :)
Can furnaces be used in place of the terracotta?
Hi! Sadly not, on bedrock edition furnaces can be moved by pistons
So your choices are stained terracotta or ugly obsidian 😅 I hope I’ve helped :)
@@Akimitsu64 damn ok thanks anyway!
@@maramatpp5708or you could use shulker boxes, or melons & pumpkins for a really cheap solution.
It worked great but after the new update came out it does not want to work does everyone have the same problem if so any tips to fix this I really do not want to redo everything
I hear a few people say this, I have a new design linked here:
ua-cam.com/video/IkOdbZFTI4g/v-deo.html
and you only need to rebuild the top floor
So skip to 2:55
Hope this helps!
*1:55
@@Akimitsu64 at first it did went down but when I tried to press it to go back up it clicks but there's no movement it's basically stuck on bottom level trying to go on the top level
@@marvinsotelo wow that’s super unusual, are you able to get in touch on discord? I’m akimtsu#6471 it would be really helpful for me to see a screenshot
Or Xbox?
My elevator is not going down. I'm stuck on part 3. I double checked everything and swear everything is the exact same as you did it. If I take out the obsidian at the top the top bit of the elevator moves up but everything else stays. Is there anyway I can fix this? It looks like everything's working it just the actual elevator isnt being triggered. That's what it looks like to me at least. I have also made a shaft but I used terracotta. Please help me fix this
Hi, do you have discord so I can take a look? I’m akimitsu#6471
Did you have the 2 blocks underneath from 7:30 ?
Alternatively here is an improved elevator design: ua-cam.com/video/IkOdbZFTI4g/v-deo.html
Good luck! :)
There are two holes left above the honey blocks when adding an elevator shaft (5:34 and 9:17). Is there any way to fix this? Works otherwise, just visually annoying.
Unfortunately not, I have another design without gaps but with visible pistons, would that be better?
@Akimitsu Pearson Yeah sure, is it linked somewhere?
@@Akimitsu64 Please? :)
@@kl10sx Hi, the video isn’t ready to upload yet but You’ll be the first to know when it’s ready :) hope that’s ok!! 🙂
@@Akimitsu64 Awww yeah :D
I got everything working except the two way repeater for the call back system, seems like maybe they changed it? Any suggestions
Also when I cover it all in terracotta it stops working 😢, I am going to check out the other design that could help lol. I hate survival
Yeah the two way wire has broken due to a comparator bug added a few months ago I’m afraid, yeah using the new tutorial will help you out with that. Where were you putting the terracotta specifically?
Hey ive made the design and im absolutely loving it but is there a way to cover it up into a shaft?
Yes, I wish I’d explained in the video
See ua-cam.com/video/tNtXparclAU/v-deo.html at 12:58
@@Akimitsu64 cheers dude btw keep up the amazing work
@@boltistic1215 Thank you so much! 😊
Why is a wooden button necessary, why can't stone be used?
Good question! A Stone buttons press lasts 1 second, wooden buttons presses last 1.5 seconds. Weirdly half a second really helps the elevator be more reliable. If you use stone there is a small risk it breaks at the top platform
@@Akimitsu64 ok ,thanks for the fast reply. Definitely got a new subscriber
do you have to use honey blocks?
Yes
Hey, I’ve made it past the elevator part, I’m on the calling in, I can call it up from the top but can’t call it down from the bottom when the glass transitions to type comparator it downs activate it’s a block down from it
The 2 way wire is the hardest part
I’m making a new video about it
I caught covid recently so I don’t know when it’ll be released
Also After you said glass I don’t understand your comment
For now I can only wish you good luck
Orrrrr:
Plan A
Place a lever at the top (to activate the same part the top button does)
Then go down 2 way wire and find where the signal stops and fix it there (if you can)
Plan B
Make 2 wires, one from base to top, one from top to base. No comparators, just repeaters. But avoid a feedback loop! This is a better option I wish I’d used in the tutorial for it’s simplicity (risk is everything goes crazy - test before use)
Great tutorial, unfortunatelly my elevator isn't as high AS yours. Everything is working fine but the two way wire. I can call from top, but whenever I call from bottom the elevator is damaged. Any ideas?
Adding one more two way repeater near top should help! To be honest my call system in this video is awkward so I don’t use it anymore
Can you make 4×4 elevator? Maybe it's gonna be so cool
Yes that would be very cool! 😎
Thanks for the idea NazGamerz!
edit: I have made a 4x4 elevator!
It is much more difficult than the 3x3 but a tutorial will be out by August!
(I’m recording and editing one video a week soon)
This challenge helped me make a 7x7 and 10x10 elevator too, without your suggestion I wouldn’t have thought them possible! So thank you 😄
Спасибо тебе большое, я искал очень долго видео про нормальный лифт, и не на одном видео на русском языке не было. Спасибо 👍🏿
If you reply I would appreciate it so much because I have been trying to get this to work for over 3 hours! The first bit works fine it stops when it gets to the top with no obsidian but when I press the button to go down it just continues to go up and just breaks! I have tried every I can do you think you know what the problem might be because I have watched this video about 20 times double checking every thing is right I’m just so lost now the only time I can get it to go down again is by putting obsidian at the top so if you have any suggestions I would appreciate it loads!!!
Hi, could you get in touch on discord? I’m Akimitsu#6471 it sounds like the timings are just a bit off. If you can send pictures of what you’ve made that will be super helpful!! I’m amazed you’ve persevered super well! It’s 1am in my local time so I’ll get back in touch later mate
Thanks
Ok I’ll try to get something helpful or I can invite u to the world
@@kbrockin417 either works :) my xbox gamertag is ApplecraftArt64 if you’re happy to invite me. I’m unavailable later today as I have a work shift. But I’m available most of next week to join
Ok I’ll add you just text me on Xbox :)
i don't know why but it doesn't work for me. Maybe tou can help me rebuild it on my map plz 🙏🏻
That’s ok, I got it wrong first time too aha. Are you asking me join the world you’re using? My gamertag is ApplecraftArt64 if that helps, send me an invite and I’ll help out :)
Alternatively, can you send pictures of the redstone for me to check?
@@Akimitsu64I'm inviting u
@@Akimitsu64 I found a new way to stop mu problem, I just have to place an obsidien block on the block that is moving by the sticky piston
The left one and it works perfectely
The 2 way wire 12:37 not working, is there any other way?
Yes, sorry for the hardship. Please try the method from 9:12 in this video ua-cam.com/video/tNtXparclAU/v-deo.html it’s much easier!
The block on the piston next to the honey keeps going down with the elevator I don’t know if it’s broke or if it’s supposed to do it
No it’s not meant to, use stained terracotta or obsidian instead. Is that all that’s broken?
@@Akimitsu64 when I did that the whole machine went back down but the slime and honey stayed at the top
@@justsomeguy1375 can you get in touch on discord? I’m akimitsu#6471 I’d like to see pictures so I can help better.
It sounds like you got the timings wrong for the catch arms, orr it’s getting stuck on something else
Love the build! although im having an issue where the elevator went up, but it doesn't go back down
Can you get in touch? I can help you fix it :)
So made the whole thing but comming to a problem in the end of it where the recall set up ends up turning into a solid signal. So not sure what im doing wrong but other than that the Elevator works perfectly! so trial and error till i figure it out
It’s ok you made it perfectly! But there is a comparator glitch in the latest update making that happen to the call buttons, I’m gonna make a short video about it and how to fix it soon
@@Akimitsu64 Dang I’ve been noticing it more and more with some of the current builds I end up logging back on my buddies realm and some of the stuff I gotta resettin but honestly don’t mind cause it keeps me fresh with the patterns. But with the elevator gonna jus end up leaving the recall set up jus cutting it off for the time being till the update is live! I appreciate the feed back as well my dood!
@@cameronbeauregard2342 That’s interesting and no worries my dude 😎 you are welcome 🖖
@@Akimitsu64 Definitely ! i jus got back into Mc again cause i got rid of my xbox a few years ago but my buddy kept our world going so now in my absence it's time to put in my work! if you have a insta i can send pics of our 4+ Survival world
Hi, the bug seems to have been patched (finally) I perfer Discord to instagram I’m Akimitsu64 on there
hello, friend, could you create another one because my minecraft is not working 3x3 create today I'm asking for one that works stone button
Ok, it’ll be a short video just for you. It’ll be out this week. Anything else you want changing?
@@Akimitsu64 I used all butoes wood gold stone black stone and nothing else worked which one is your xbox
@@Hyyl2Wooden buttons work. You must’ve got something else wrong.
I can help if you get in touch on discord I’m Akimitsu#6471
This works on any update of Minecraft since honey was added, doesn’t matter what Xbox
Do u have to have 2 obsidian blocks at the top
If you don’t want to use obsidian you can use a three block tall pillar instead for each side- that’s enough to stop the elevator in the same place without obsidian :)
I am so confused and don’t know what i did wrong but it doesn’t work when going down
That’s ok, most people forget the 2 glass from 7:15.
Also make sure the repeaters are on 4 ticks of delay
Good luck!
@@Akimitsu64 yeah it was like that
@@Akimitsu64 i think i got confused when you removed the observer then replacing it with terracotta
@@Akimitsu64 you also got ya self a new follow
@@coffeebeans2795 is it working for you? :)
Kind of a dumb question, but do you have to use stained glass?
Hi, not a dumb question! No it doesn’t have to be stained.
For the 2 way wire any glass will do 😀 they’re the cheapest material that works (don’t use slabs of any kind tho)
Is it possible to do it but with more floors?
Yes I made one over a year ago. This is the only tutorial for now: Multi Floor 3x3 Elevator Minecraft challenge!
ua-cam.com/users/shorts7_mtgGQ1RmQ?feature=share
@@Akimitsu64 It would be cool to make a full video of it
I’m in the process of making it now, and i see the comments of the possible problems, have they been worked out? The ones I hear about are the elevator only moving one block.
Currently I am building mine underground in a cave going upwards so I am just seeing if I need to change anything before I fully build it and find it to not work haha.
Caves are risky, are you making an elevator shaft? If the elevator touches stone, it’ll stop- so your elevator shaft will need stained terracotta instead or a one block gap around it for it to move freely (because stained terracotta doesn’t stick to slime or honey) I’ve not solved the one block issue mystery yet, but I’m trying to recreate the problem on my test world now
Until I find the issue, just be careful and check the observers are in the right places as they’re the most important part :) good luck!!
@@Akimitsu64 well, my buddy got onto our realm after I had finished the bottom and put down the button. The top of the cave hasn’t been dug out yet and his curious self pressed the button. To my surprise I see the elevator at the top of the cave!
So, it works! I am currently rebuilding it and doing exactly the same thing.
@@Akimitsu64 also, I am not making a shaft for now. It’ll be open.
You created something awesome. Thank you for sharing!
@@jesseswift9107 i’m SOoo glad it’s working for you!! You’ve done very well building it and you’re welcome 😁
Can we add a t-flip lock to the redstone?
Why would you want to do that?
The elevator needs buttons, not levers
T flip lock is for buttons not levers.
@@lambilly6568 🤦♂️ No. Don’t use a t-flip flop with the elevator! It will break.
Whyyyy do you want to add a T-flip flop????
I know T-flip flops work with buttons, but they’re totally useless in my elevator
Oh. Okay
Can I Use Only Slime Or I Also Need A Honey Block?
You need both honey AND slime
See this if you need honey, and beehives grow in birch trees near flowers
ua-cam.com/video/FyDYIh-i9r8/v-deo.html
Does this work on every version of minecraft bedrock?
Yes! It should also work on Java too but I’ve not tested it. In theory it works on e v e r y version of Minecraft, bedrock or otherwise :)
Do you need the terracotta for this to work?
Or use obsidian instead, yes
Moss is my favourite elevator shaft decoration
i tried doing this and it worked first time now its not working can i get some help?
Yeah totally, can you get in touch on discord or xbox?
@@Akimitsu64 xbox sure
@@Akimitsu64 whats ur gamertag
I am gonna use a different tutorial because this is a little confusing
Ok, sorry it didn’t work out
dosen't work in bedrock windows10 when the elevator goes up the honey block in top floor block the entire contraption
Try this Pssst
ua-cam.com/video/qPx4pugOS4k/v-deo.html
Hey im sorry to say but this no longer works i tried it before and it did it was great but it no longer works if you could come out with a new one that would be mighty fine
Thanks but It is working perfectly for me still. If needed, try rebuilding. I’m making a better 3x3 tutorial anyway but that’s to prepare for my multi floor elevator video
@@Akimitsu64 ok i will !
is there a 2x2 version?
Yes! See FedX Gaming’s tutorial ua-cam.com/video/b0eLy6MyWQc/v-deo.html
thank you
Oh. That? Are you nice have thank you 😊
This build was amazing but now, due to the newest update(1.19.40), the callback function isn't working T^T
That’s such a shame, it still works for me
Try this:
ua-cam.com/video/qPx4pugOS4k/v-deo.html
Yea its not working any ore
@@cpr92 I wish I could show you a picture of what I did or, better yet, there was a place to show 3-D exports of builds because that would be so much easier than text. :/ Basically, I had to use two lines of redstone and repeaters, one going from the bottom button to the top and another running the power from the top button down to the bottom. This comes with a problem though, or, at least for me it did. So say your elevator is on the top and you're at the bottom. When I ran the lines close to one another, both the redstone line up to the top and the line to the bottom were powered and it broke the elevator. What I did was placed more dust until I found the sweet spot where the bottom button's redstone only had enough power to hit the repeater of the redstone line going up to the top and the top button's only had enough juice to reach the repeater of the line going down. Hopefully that makes sense?
@@lunacapurnicus7787 that makes sense, and is clever. Well done!
@@cpr92 Hi everyone! I have a smaller and easier Elevator design with working call buttons here if you’re interested: ua-cam.com/video/IkOdbZFTI4g/v-deo.html hope this helps everyone out!
Also Merry Christmas!
i didnt work for me
Try EASY 3x3 Elevator for Minecraft Bedrock!
ua-cam.com/video/IkOdbZFTI4g/v-deo.html
Can you make,patterns
Yes!
@@Akimitsu64 question sorry my asking so many
@@Akimitsu64 when the elevator goes down why the block on top where the redstone torch is why does the elevator bring it with it?
@@Akimitsu64 is it suppose to do that?
@@coffeebeans2795 that’s not supposed to happen, try starting the tutorial again -or fix the repeater’s delay to 4 ticks
Hello I need help on the first part lmfao
Do you have Discord so that we can talk there instead of in the comments? Thanks!
Yes! I’m akimitsu#6471 on discord :)
@@Akimitsu64 I think I sent the friend request, is your name with a capital A?
@@Akimitsu64 can I add you as well? So I can share my screen in a call if that's alr
@@OffcialAmerica123 yes ok 👍
@@Akimitsu64 I sended
hey does quartz still work
Yes
Thats how it be
To work thank you
can it be obsidian ?
Any part can be obsidian except the 3x3 platform and the 2 glass underneath the honey
Hope I helped :)
Does it have to be 17 blocks down?
Nope! :) they can go for hundreds of blocks up and down if you choose!
(minumum is ~10 blocks between stations/floors)
This elevator only has two floors though
if you want more floors, then Check this out ua-cam.com/video/b0eLy6MyWQc/v-deo.html
And another question can i use obsidian instead of glazed terracotta?
@@dorienctm8387 yes! Obsidian works. I just discovered leaves work too :)
@@Akimitsu64 the 2 way wire doesn't work what do i do?
Or maybe you can help me build it?
In mc
Does this work at 1.18.30?
yes! should do 👍
Does it still work
Yes
Auick question
cool design but hated the part where you constantly fucked it up and then didnt edit it out, even tho i know you know how to edit, so you chose to just leave it in.
Yeah this was my first ever video for youtube and my worst in quality, here is a better tutorial to follow: ua-cam.com/video/IkOdbZFTI4g/v-deo.html
Actually
Maaf saya orang indonesia tapi bagus banget elevator ya
I got it
1:15
It dosent work youve changed your mined and i clicked the button then i made a mess you said to push it im disliking it
9:34