One Step Polish: Review of HD One Hybrid Compound & Polish
Вставка
- Опубліковано 28 сер 2024
- SUBSCRIBE right here for more awesome content!
/ @wilsonautodetailing
HD One Hybrid Compound and Polish: goo.gl/yPAxbp
Spider Pad: goo.gl/GWysqG
Rupe's DA Polisher: amzn.to/2Ncbmxn
*FOLLOW Wilson Auto Detailing on SOCIAL:
***Instagram: / wilson.auto.detailing
***Facebook: / wilsonautodetailing
If you have any questions/comments/concerns, or would like to know more about consulting details for your own auto detailing business, please Email me at WilsonAutoDetailing3@gmail.com
*If you are local to the Middle Tennessee area, and would like to contact me for detailing services, check out my website below:
www.wilsonauto...
About this video:
In this video I review "One" a one step polish and compound by 3d car care. I also review their light cut spider pad using my Rupe's DA. One step polishes have a strong place in the detailing world for the time they save us, and the results they give. 3D car care is a trusted name in the auto detailing industry, and this products and pad is no exception. Follow along, and learn why I love these products!
![HD Speed VS 3D ONE Compound & Polish [new product]](http://i.ytimg.com/vi/TAZe1x1yH98/mqdefault.jpg)
I did my first paint correction today and living in Central Florida I had to wait for a cloudy day. I used Chemical Guys V36 compound and orange hex logic pads. I was supposed to do a two step but between the prep and starting it took me from 8:00 A.M. to 2 P.M. so I was literally spent, I'm 64 and diabetic. Next time I will use HD One because I heard you could use it in sunlight and being a two step will save me some time which I'm all for it.
It’s a two step in the sense that it will polish and seal, but not compound and polish. Definitely one of my favorite products though!
This is a pad responsive polish.
It can be a cutting compound with a heavy cut pad, a medium polish with a medium pad, or a fine finish polish with a finishing pad.
Similar to the original Meguiar's SOLO system (M86, and the burgundy / white wool pad are the only remaining parts of the system). It was Meguiar's first SMAT (non diminishing) abrasive buffing liquid. The kit came with two wool pads (heavy and light cutting), two foam pads (polishing, and finishing) and maybe an apron a spur, and a pad conditioning brush - can't remember right now.
One can be used for single stage corrections, but it was never meant to be limited by being pigeonholed as a "one step", as per their introduction video and demonstrations.
Anyways, great video and great demo!
danlc95 sounds like a similar product from CSI called Ceram X Polish
@@regg82ooo - Yep.
I still want to try that one too, the CSI.
3D One is a really good one step....I'm just Harry Homeowner and this is all I use, and it's priced really well
I used it this weekend on a black HHR SS....I will buy it again, good product...
Excellent showcase Luke. I have never used the polish nor the pad and I have a project that allots time and resources to only do a 1 shot. I thought I'd go will my trusty Ultimate Compound but this review might change that for me. I hear 3d products are extremely easy and that it seems like the material can be worked a very long time. That is exactly what I'm after here. If this is a $50 combo and it works like I just saw, then thats worth every penny to give it a shot. Thank you and please keep the channel alive, making these really great vids!
Hey Luke! Quick question, why would you use this over HD SPEED? Is it only for if you want to put your own protection on after? Keep up the great work!
Great question and inevitably someone had to ask! Best and most simplistic answer. One does more cutting the something like HD speed. That is a way oversimplification but it gets the jist of it
Wow. About half of these comments are people asking the exact same question (HD Speed vs. ONE). Do people not read the responses you (and others) have already provided before making the decision to post the exact same question yet again? Regardless, keep up the good work.
Hahaha generally speaking no they don’t 😂😂😂 thank you for being proactive
Nice video, just bought the 3D one today for my camping trailer made with gelcoat, can you help me please? After I apply the compound my surface was very good looking so I decide to wax it with cleaner wax, the surface was pretty nice too with the wax. Once the sun appear I can see some haze underneet the wax kind of a window that as been not wash good. Why do you think it his appenning ? Thanks for your help.
I’m just starting out and I got a few meguires products and mostly 3D I have been watching your videos for tips and tricks / unfortunately it’s been raining so not much getting to play with my new toys and waiting to test them out on my car and my wife’s car - lol - well keep making great videos it will be hard when I start because I don’t have a garage to work in I’ll be out in the Texas sun
The pad cost a lot compared to others. Do you have to use multiple pads still? Thanks, great review!
3D has 2 purple spider pads, did you use the light or dark purple one?
It looks like the light one
Hey love the channel .question when you are finished do you recommend using a ipa or a paint prep after before a sealant or wax or will that remove any fillers or does this not have fillers since a compound and polish. Sorry if a newb question lol
Hey man! This specific product doesnt have fillers, so there is no need to follow with an IPA wash
I like hd speed
Hello Wilson do you have to primer the pad with spray or not??
Cause I’m new in this
I want to polish my own car
Whats the difference between HD Speed and this product. Which is better or worse. What is easier to use.
how many pad do you need? is one enought for the whole car?
link are not working i cant buy from your links
Great review!! Can you please review CSI Ceram-X Polish? There’s not a whole lot of review about this company and their products.
Hi, how mamy passes/speed/force did you do/ use?
What’s the difference between a DA polisher and a regular polisher?
DA stands for dual action, and by regular polisher I assume you mean rotary polisher. I actually put out a video on this, I’ll link it up below!
ua-cam.com/video/ldBKF_0X2SU/v-deo.html
Would you attribute the results to the product or the pad? And don't say both. Which one of the two was more impactful on the final result?
Joseph Connolly you wont like this answer but both play a huge role in correction. This product can cut and finish down as nicely as the pad you couple it with. Whats more important a hammer or a nail?
I was thinking about using HD One with a microfiber pad for a little extra cut. Thus if the product is more important than the pad, I might buy. If it is a system and only works in conjunction, then I will be waiting until I go through my current set of pads to jump ship and switch to a new system.
Joseph Connolly I understand. My experience with microfiber pads (for cutting) is it leaves the paint hazy afterwards which means a second step is needed anyways. These mid range all in ones are best when you pair it with a spider or med cut foam pad which can finish down nicely. Or, you can simply swap pads and use this as a two step.
I myself do not like mf pads and prefer wool or foam. But why not try it and if it needs to be finished off just swap pads.
Point taken. Thanks for the insights.
If I had to say, I’m going pad
Great review. Definitely gonna try the spyder pad as I'm a huge HD Speed fan. Question tho, what's the difference between HD Speed and "ONE"? Thanks!
HD speed is an all in one, meaning it also protects, whereas one is only a compound/polish in one.... its confusing I know
Thanks!
ONE has better cutting ability with no fillers while Speed offers a little protection (Montan wax), contains fillers and may finish down a bit better. Both are great products.
Your links for 3d one and spider pad are dead.... Great vid
What is your go to rubbing compound? And da or rotary?
I would say right now my go to compound has been show car’s power brite, and as far as DA or rotary, it just depends on the situation. DA more often than not
i must get some!!
great video kid.would u use this product over say groits correction cremes??thanks
ive tried both and i still thing the Griots Fast correcting cream is great. 3D One is great also
I stand to be corrected but I was under the impression that this isn't a all in one, this doesn't have diminishing abrasives in it, my understanding was that this is ONE product that is used to compound with the appropriate cutting pad then when you reach the correction desired then you change to a polishing pad, so it is two steps with ONE product, I'm not sure where I saw this, it could have been an actual 3D video on the product, the ONE is a combination of 3D AAT 501 cutting compound and 3D AAT 502 finishing polish then 3D SPEED is a combination of 501, 502 and 3D POXY wax, obviously you don't get the same effect using the SPEED as you would using the three products separately, thats my take on it, I'd like some feedback incase I've misunderstood it, I haven't had a chance to use it yet, it hasn't reached this far yet all the way in Barbados, 🇧🇧😎, if anyone wants to send me a sample of it or samples of any products it will be much, much appreciated as we seem to be left behind when it comes to products, beautiful island though, great video as always 👍👍👍
yeah 3D One is a "one" correctional cream. Its not a dedicated 1 step product. It can be used has a 1 step or multi step polish. Fantastic product IMO.
3D products 👍👍
What speed setting did you use?
how do you clean the spider pad
Is it me or did every time he flipped the rag it always ended up in the same side
Luke, Have you ever tried Griots Fast Correcting Cream as a one -step? I use this for customers with excellent results who want a paint enhancement. Cuts pretty good, polishes down well, very little dusting if any, and easy wipe off. Maybe you could do a vid on this product. Thanks
Yep it is a great product! I will definitely put a video out on that specifically sometime
In my experience while Fast Correcting Cream cuts better, the regular correcting cream finishes out way better.
@@Sinisterg60 I use a Europad sometimes with Fast Cream and it polishes down good. I will try the correcting cream sometime though. Thanks
Is this still your favorite aio combo?
Speed is their AIO. 3D One is a "one step", ie no protection left behind like a wax. Anglewax Enigma AIO is a great aio as well.
Lighting issue is easy to fix. Simple remove the reflector inside the cap of the flashlight, leaving only the bulb. This will mimic expensive swirl finder lights, which mimic the sun. The light rays should be free flowing and not focused.
Awesome! Thanks man!
What's the best pad for just waxing?
Waxing is always done the best by the power of your hands, but if you have to use a machine for this, use regular soft foam pad
Nice review. :-)
Not a fanboy like him. 3D is a cross-company that stole the banding from 3M and has just OK products that are twice the cost of the competition and they don't measure up in quality. Then they use iPhone marketing and try to get a fanbase like this young fella. There is a lot of that going around like Rupes, he likes them too but their polishers are crap that easily stalls and once again expensive and same marketing strategy.
So what would you recommend then?
@@naitomea_st ...don't bother, he sounds like a troll.
Hd speed or one ????
Good question! Video coming soon! I like both for different applications!
Wilson Auto Detailing still waiting for the comparison
Would you use ONE then SPEED?
Nope, I would use either or
@@wilsonautodetailing thank you
If staying in the 3d line you could use One then Poxy as a sealant.
How do you feel about hd speed now?
Still love it! One and HD speed are very different products, not meant to be used in place of the other
@@wilsonautodetailing you can use ONE twice once with a compound pad and again with a polish pad. Then you can use hd speed or just go to poxy.
Using way too much polish!!!! Wow very bad .. are you able to really work in that big of a section?
This or the Sonax perfect finish
For a one step
This..cheaper
How does this compare to m205?
I will definitely do a side by side comparison! I would say that this product is a good example of the advances we've made in the detailing world, but M205 is a staple that I dont think has been replaced yet
@@wilsonautodetailing m205 was ever advertised as a one step even though even meguairs used it as that in there classes. Of course depending on what paint you were correcting
@@Alexbenz2008 3D One isn't advertised as a one step either. The "one" means "one polish". It is designed to have different cutting ability depending on the pad. One polish, multiple pads.
It doesn't leave the residue like m205
You sure did wipe it down a lot.
Do you recommend topping with a detail spray
Topping with a detail spray? I assume you're new to Detailing.
Do some research.
@@TheCeki1982 what i meant to say is somthing like "beadmaker" Meguiars Ceramic detail spray"turtlewax spray and seal" etc...
3D SPEED has is a sealer on its own but just askin if layering another step for added protection. So dont be an ass about it
@@marrueco568 Be more specific in your question to get an appropriate answer.
After every polish regardless of the product, a wipe down with a product such as Gyeon prep is recommended.
You can use a spray such as Meguiars, Sonax, etc.
Test the product you prefer.
@@TheCeki1982 thanks for the info
Looks like a good product but your using too much and working too big an area .
Well in this video it was no problem. There are sometimes things done for the sake of videos that I wouldn’t necessarily do when not filming
so you just like to misslead ppl? @wilsonautodetailing
Hey Luke. Is it k to clay-bar a brand new car? Someone told me that that could create swirls
Why don't you try it and find out?
You’ll be fine. Most cars spend some time on the lot or are transferred by train. It’s more likely than not that there will be some form of contamination present on the paint. Always test however. Grab a sandwich bag and use it as a mitt. Gently glide over the paint. If you feel texture, clay. If it’s smooth, go straight to protection.
Lightning35 Delta514 thanks lightning for ur flashing response. U rock
I would say absolutely clay a new car. It definitely needs it
Just use a iron remover first than inspect if it needs it, chances are it'll still need to be Clayed a little.
Is it better then hd speed
Not better just for a different situation
hd speed include wax thats the only difference, this is better because u can apply your own sealant, or nano ceramic for longer lasting.......
why you dont speak french :(
Way to much product on the pad you only need 3-4 dime size
Holy crap you talk fast. I liked the content but I thought I had it on 2x. Not trying to be mean just hoping to let you know.
wholly crap, did you wipe down for 20mins? lol
That was entirely to much product way to big of a panel also