Taramps Smart 3 vs 6000W Sub and INSANE Amp Dyno Low Impedance Testing [4K]
Вставка
- Опубліковано 29 лют 2020
- #Taramps #Smart3 #AmpDyno
As a follow-up to our recent tests and technical review of the Taramps Smart 3, we decided to put the amp through the ringer. Let's try ALL of the tests on the Amp Dyno from 8 ohms all the way down to 0.5. Yes, the 0.5 certified test is brutal and out of the 100's of amps I've tested, only a handful have been able to handle this load without going into protect or going up into smoke! This amp at the time of filming is still $265 shipped from Amazon, an incredible value!
In addition to the crazy low impedance resistive testing with the Amp Dyno, we also hook up the Massive Audio BOA121 12" dual 1 ohm subwoofer in parallel to try it at 0.5 ohms. Can the Taramps Smart 3 handle this load? What does it look like on the o'scope? Stay tuned to find out! Remember, this review/test was NOT paid for by Taramps or anyone else except my Patreon supporters and viewers like you who use my affiliate links when shopping on Amazon or eBay. Thank you for your support!
See the previous detailed review of this amplifier:
• Taramps Smart 3 Detail...
Buy the Taramps Smart 3: (affiliate links)
Amazon: amzn.to/3c2ZHi4
eBay: is.gd/tarampssmart3ebay
See other Brazilian amps I've tested:
is.gd/walbrazilamps
➡️ Support OSS / Williston Audio Labs for early access to videos: / oldschoolstereo
One Time "Tip" for Video Support: paypal.me/BigDWiz
Video Timestamps:
0:17 Introduction to Video
0:52 0.8 ohm Dyno Tests
1:51 0.67 ohm Dyno Tests
2:41 0.5 ohm Dyno Test
4:56 6000W Sub Wired at 0.5 ohm
8:52 Measuring Temp of Amp after Testing
9:43 Clipping the Smart 3 with Feel the Bass
10:31 0.5 ohm Dynamic Test on Amp Dyno
11:37 8 ohm Amp Dyno Tests
📒 Show Notes, Video Gear List and Resources 📒
Make sure you are subscribed to my channel so you'll receive notifications when I upload the next exciting video! Thanks for your support and remember to keep it Old School!
Subscribe to Williston Audio Labs / OldSchoolStereo Here: / bigdwiz
⚡ Williston Audio Labs on Social Media:
www.oldschoolstereo.com
www.willistonaudio.com
/ oldschoolstereo
/ oldschoolstereo
--------Cameras and Gear Used To Shoot This Video ------
(Video Gear I Use)
Camera - iPhone Xs Max 512GB - goo.gl/uFHBh8
Samson Go Mic Mobile - amzn.to/2BSAtll
960 LED Panel: amzn.to/2Sxoq3S
Lavaliere Microphone - amzn.to/2Rw5PIw
Sennheiser Wireless Mic - amzn.to/2BSwIfD
This VIDEO was EDITED with LumaFusion on an iPad Pro 12.9:
iPad: amzn.to/2Ancr1W
Software: goo.gl/6yvWss
-------- Test Bench Equipment ------
SMD / D'Amore Engineering Amp Dyno: goo.gl/sJTcf7
XS Power D1400 Batteries - amzn.to/2BPFCKW
XS Power PSC60 Charger - amzn.to/2CHGcfs
Fluke 1000A AC/DC Clamp Meter: amzn.to/2Rw5WDA
Handheld Dyno: amzn.to/2u2EgKV
My Favorite Screwdriver Kit: amzn.to/2x0VzcE
DISCLAIMER: This video and description contains affiliate links, which means that if you purchase from one of the product links, I may receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! - Авто та транспорт
![You Won't Believe This! Taramps Smart 5 Amp Dyno Test and Review [4K]](http://i.ytimg.com/vi/1SYb9AdqNSo/mqdefault.jpg)
![You Won't Believe This! Taramps Smart 5 Amp Dyno Test and Review [4K]](/img/tr.png)
![Taramps Smart 3 Detailed Review and Amp Dyno - 3000 watts Done Right! [4K]](http://i.ytimg.com/vi/DxMGPhNASl4/mqdefault.jpg)
![Soundstream BXA1-10000D Bass Extreme Amp Dyno Test and Bass Rockers BR2000.1D [4K]](http://i.ytimg.com/vi/_EdxB53zuqQ/mqdefault.jpg)
Buy the Taramps Smart 3: (affiliate links)
Amazon: amzn.to/3c2ZHi4
eBay: is.gd/tarampssmart3ebay
See other Brazilian amps I've tested:
is.gd/walbrazilamps
Video Timestamps:
0:17 Introduction to Video
0:52 0.8 ohm Dyno Tests
1:51 0.67 ohm Dyno Tests
2:41 0.5 ohm Dyno Test
4:56 6000W Sub Wired at 0.5 ohm
8:52 Measuring Temp of Amp after Testing
9:43 Clipping the Smart 3 with Feel the Bass
10:31 0.5 ohm Dynamic Test on Amp Dyno
11:37 8 ohm Amp Dyno Tests
DISCLAIMER: This video and description contains affiliate links, which means that if you purchase from one of the product links, I may receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
That top red Taramps logo is pretty cool, indicating output power level. Thanks for 8 ohm tests too D. This channel has ascended so quick this year.
Great job buddy! Works as expected! Dynamics will probably be so high as a few cycles of sine wave sneak through at rail clip before the circuit limits the amplitude - in my segment I said how the amp would try and make around 6k at 1ohm without the limiter, seems I wasn't far off!
You were 100% correct sir!
could those few cycles of sine waves damage a sub? a subwoofer stop working for a day and then now it seems to work but I had a 1500 rms sub hooked up at 1 ohm to the smart 3 (Skar vxf 15).
i guess i know the answer to that question, i'mcurious how the sub stopped working and then seems to be fine now
@@Titans2138 7, spelled S. E. V. E. N.
I have bought several amps after watching your test been subscribed for 4 years now you are the go to guy for my audio needs I'm old school 90s bass head when it was first popping up big much love Big D
I never watch UA-cam tutorials. But, you do a kick ass job. Thanks!
Thanks brother 🙏
Nice. I appreciate what you do BigD. You have changed the game for alot of people and I bet you even influence companies to stop lying about actual power of their products. If you ask me that's damn impressive. I hope to see some more old school amps on the Dyno. Takes me down memory lane and informs me on what those old joker's were actually putting out. P.S. I bet this is the amp EXO got from ya in his recent video for his gf. Keep up the good work. By far my favorite car audio testing channel.
Superb Amp & Superb Video...
I'm a long time follower of this channel & I appreciate how Big D tries to accommodate the viewers.
Great video 👍 BigD very very informative I like the way you thoroughly explained the features, pros/cons, and real world numbers. Keep up the 0.5 numbers another thumbs up.
That's inspiring and impressive.
Inspiring because I am less weary of electronic failure with this brand than I was yesterday. 👍
Impressive because it looks like they've figured out the weekest link they had. 👍
Thanks for making the video Big D Wiz!
The technology used in amps today is crazy compared two twenty years ago. The amp I use is over 20 years old. I dont push it hard very often but when I do it gets hot as hell real fast.
The old Class A/B amps get real hot because they are much less efficient
Learned something new today watching this thanks . cool videos.
LOVE THE LOW IMPEDANCE TRSTING!!! Keep it coming!
Most amps be like boom shocka locka
That’s what we wanna see lol 😜
That little amp was pushing hard. Smart electronics saving it from blowing up! Oh yeah, this little bastard is coming hard! I’m not giving up on Class A/B, but this is most impressive. An upgrade from their usual! Go BigD! We want to see some 1/4 pipe action!
What an incredible amp👍👍
Loving Big D content long time.
Keep up the good work!
❤👍
Thanks for watching and commenting!
Thanks Big D just ordered one for my 4 Massive Sumo 8" Subs on my competition motorcycle.
Sweetness 👌
I have to say I installed this amp and it is everything you said it was. My electrical resistance is 1.87ohm. Was running a 2ohm Stetson 3000.1 before. This Smart 3 is more powerful, stable, and better SQL.
This is Brasil man, good luck, this amplifier are the best from here. Hugs from Brazil
👌😬👍
“Set your gains the right way”.
Famous words from a wise man.
I'm about to hook this up to 2 12 inch american bass elites. How do I se my gain?
Keep up the good work...love your channel ...you keep it real
This is impressive!! Competitors can wire in the dirt and still get power they want, without worrying about hurting the amp whenever they want to demo. Crazy!!!
GUYS TELL EVERYONE YOU KNOW THAT LIKES MUSIC ABOUT BIG D. HIS CHANNEL IS KILLING IT WITH CONTENT. PLZ SHARE.
Thanks brother 👌
Love this channel
It seems like they have made some serious progress. It's nice to see a company continually r&d.
My lil bro has one of these running a Power Acoustik BAMF 12" subwoofer. It sounds good and it thumps hard. This will be my next car audio purchase.
Awesome video as always big D!!!!
Thanks for watching and commenting!
Those Massive BOA's are some good sounding woofers. There's a video on UA-cam of a guy with 2 of them playing a Backstreet Boys song and it was hitting every note accurately and the response was on point, very impressive subwoofer.
Amante Apasionado
Between ds18 or massive what would you prefer? Cuz im all the way with massive hippos.
I think this is one of the best amps out right now the price and power are insane I ordered 2 just to have a extra people always hate the new kid on the block TARAMPS 4 the WIN
Im glad u did one these amps i see them but iv been really sceptical abt its effective power
Loved this video! Wow, that amp is great!
Thanks for watching and commenting!
I can’t wait till you test the Sundown SFB!
The SFB have been tested, just not below 1 ohm.
@@blackwhip it dont survive below 1 ohm , maybe .8 dynamic but anything else is asking for a bad day .
I was gonna buy one to play with but I’m salty now b/c they jacked the price by $50 just last week
Williston Audio Labs hahaha me too! I saw it go up to 399 on amazon wishlist few days ago lol
Cant stand my SFB3000 - Clips like a welding machine. Many people having these problems - about to get rid of it and buy the smart 3
geeking out something fierce, kool
Yeah just a bit 😜
Another great video!
OMG i love the way that speaker was hitting!! 😳
👌😬👍
Just purchased one using your link. :) Wish me luck.
I appreciate the support. I think you will be impressed 🤙
let me know how it sounds, I may have to pick one up too!
@@rashad5286 I will install it tomorrow, I ordered it this morning and had it delivered same day. I have a dual 1.4ohm subwoofer so I will likely just wire it down to .7ohm on a DC Audio XL 15" m2 @14.4v with dual 2/0 runs with a short 1/0 jumper from the distribution block to the amp. Should be nice step up from my previous Memphis 16-mcd1000.
She bangs. Haha
@@TheUA-camAquarium OHHH shit bet mines should be here Thursday. It push that sub good? Rn i have a s1 2250 on 2 hds2.1 12s hoping itll be a bigger upgrade so i can get a bigger box and some meaner subs 😂
This amp is pretty damn cool if you ask me!
It’s cray fo sho!
D, you killing it buddy! Another great video!
Can't wait to see some of that DB Russian power come thru your Lab!
Thanks for watching and commenting!
That's a crazy amount of power!!!!!
It’s s very capable, especially for the price and the size of it.
Never used to care for this brand amp because they would burn up. But it looks like they fix the problem. For the money this is a very impressive amp. Especially since you can’t burn it up anymore. They keep improving these. It won’t be long everyone else will have a hard time selling their stuff.Big D I really love what you do you’re the best at this keep up the great work
i went from a sundown saz4500d to a soundigital 12000.1d, the bass is dirty, like hard. before it was soft low with authority. i would rather go other topoligies and brands. power is not everything. these amps usually have 5% distortion at all times.
@@CVLova agreed. It will fry coils quick even in non clip with audio vocally being heard.
@@numlockkilla yes. they are also full range. gna go another brand later on, but damn it sucks :D
@@CVLova simple fix is the rca inline crossovers FPODS. Cheap and look cool. Also if your head unit has a crossover built in use that.
@@numlockkilla ye i use built in xover
DAAAM these are like dynamite!! Small but with huge blast !! can imagine their strongest ones they carry 😮😮. Thanks Big D , awesome video man 👍👍👍
Yeah boi!
I picked up one of these off wish. It came stright from Brazil for 227 shipped. Ordered it on a Thursday . Recived it from FedEx on monday.
I found one of the jbl amps I had!! The GTQ 200! You must find and test this amp!
Send it to him to test
For the price that thing is a beast.
👌😬👍
Great job Dw.
Great video, I Kno it is alot of work to setup but I would love to see more .5 subwoofer test with amps, though results will vary depending on application. Still great 👍
Once I get my new test bench completed, I’ll easily be able to swap between ohm loads with subs using Ohmie
That is insane
My old USA surf boards used to do that type of wattage but they were 8x the size
Oh and 8x the price.
Yeah no doubt
@GERMAN JESUS Technology improves exponentially in reality they should be alot better by now but there are reasons for that
AMAZING AMP ..
Just sad I just bought the md3k taramps amp after watching your videos than you show me this one so I guess I have to buy another amp
Oops! The MD is the only one I didn’t buy. I got an MD1800 though
@@wal yout correct my apologies I meant the Hd3000
Amps like this are awesome for the home modder, as far as I understand the current limit is set by feedback resistance, so you just change the resistor to change the max current allowed. I like to play around with opamps and caps too.
I think it’s chip driven so you may not be able to modify but can bypass...I wouldn’t recommend though
Amazing. I would love to test my atomic amps out one day in your shop
@Chris&Q One day I hope to have some sort of equipment like his.
We miss the Yeah boy,!
🤣👍
@@wal what about 3 ohm tests for the w7 peeps???
My question is how the heck do they get that much power out of such a small package??
Full bridge
Gotta love that Northstar battery next to the sub😁
Yeah I bought that for my Accord, still haven’t put it in (as secondary batt)
I'm running a Northstar 220 and Northstar 170ft in my daily, running a Deaf Bonce AAB4800.1 with a stock 80a alt and my voltage doesnt go below 11.6 full tilt at idle, if I'm at 2k rpm it wont go below 13.6
That's crazy man, thanks for the great content
Edit: 250-300 _amps_! (such a bizarre way of clipping!? (I did see the previous video about that))
I have a bass 3k but was thinking to upgrade to a smart 3, do you think the upgrade is worth it? Running 3000w RMS sub at 1 ohm
How's the bass 3k holding up?
@@MLProductions.1 amazing, no overheating, no issues apart from the clip monitor which broke at the solder points inside but taramps sent me another free of charge so I didn't need to mess around soldering
The Price has gone up! Lol but not much after day 2 or 3 279.00 now.
Knew it would happen! Things too good to be true don’t last
You are correct, they need a bass/gain knob. Dual Rca in and out. Sundown did a good job with their SFB series amps. Damn good job!!!
Wayne Berry I bet for the price sundown can’t out beat this amp at all those testing
2 years later. Sfb line is being replaced by the sia line. Sfbs are junk. But you said damn good job. Lmao
Nice amp and massive woofer!
Hey Big D. That temperature you are reading probably isn't accurate. The laser likes dark surfaces. The light or shiny surfaces give bad results. Use a back magic marker then shoot your temps again. You'd be surprised of the difference.
Black marker... hate that intuitive shit.
you smart brother
The price has gone up to $319 now however I just bought one on eBay for $279 with a free shirt!
Thats a steal! Honestly even $319 ain't a bad price for an amp with that power.
Now in Brazil the price for us is 128... Dollar is high in change...
Great info
Thats crazy power! that little taramps 250x2 I have got super hot running just a pair of tweeters had to replace it with a punch amp👍
That’s really odd. Tweeters shouldn’t be overloading the amp. Must’ve had an issue or something. Never go wrong with the Punch amps though 👌
@@wal well you I was maxin that volume Big D🤣🤣🤣
Running 2 skar zvx 12v2s at .5 daily driver 8months beating the doors off my truck..NO SHUT DOWN CLIPPING SMOKE SMELL ETC...WIRE YOUR ISH CORRECT
what did u do as in electrical like alt and batteries?
@@SEABASS05 big 3 stock 110amp 2 agm in the back with stock lead acid in front back has a yellow top and platinum duralast total of 95ahs with back 2batts..total of 120 no diverter or capacitor or whatever its called..run your system with car running 14.8 volts steady off batterys stay at 12.9 to 13.1 so lead and agm dont mix is a myth AGAIN DO NOT RUN SYSTEM WITH CAR OFF...why would u anyway??
I would like to try a Tar-amp but it’s just extremely hard to believe a 1993 looking Alpine amp like this can really deliver 3000 watts?!? I mean the thing looks like a budget amp. I’ll have to do some research. If these products are true, I’m going back into competition again.
Bill Jones - I bought one - believe the hype. I’m running 4 12s on it and the fans barely turn on with borderline abusive listening.
the yellow ligth of clip turn on when batery voltage drop low too, taramps was on second place of quality of amp here on Brasil, but the last amps are equal or better than soundigital, very good!!
Thanks for watching and commenting!
Insane is truly the best to describe this amp
They really hit it out of the park
Lets send Big D a bunch of speakers so he can build one of those crazy brazilian walls.....
I can do it now, just be mismatched speakers 🤣
😆
@ceronv what he would probably really need is power send all the lithium batteries
1100 watts at 8 ohms is nothing to scuff at. That is way beyond the capability of any indoor made amplifier. Granted the input voltage in your home is much greater (110-115v US, or 230v EU) and require much beefier components to do so, but still. A $260 car amplifier can produce that much power is just bonkers..
My anthem is 1,650rms x 2. It's the size and the price that's amazing but I really wonder of the longevity so Bang it out and even then if you had to buy one ever we hear it's still affordable for what it gives.
He doesn't know about fp14000... lol
My Lab Gruppen is 1200w x 4. I also have a 2 channel at 1200wx2 and I have a Crown that is way over 1k. My smaller qsc is like 980w x 2. My biggest amp is 100lbs . Oh 150w x 2 LOL Jeff Rowland Model 5
I'm a new subscriber just recently started watching your channel love the reviews on everything you do from speakers to amplifiers, which got me into a little predicament,and I need your expertise. I purchase for 8in fierce Toro subwoofers I want to try to run them at 4 ohm so I can get the best efficiency for the speakers. I decided on (3)amps but I don't know which one to grab they range from $300 all the way up to $1,000 the amps are as follows Rockford Fosgate T 1500 1bdcp, the other one is the kicker kxa 2400.1, and the last one is the tarampsmart 3. Out of all three the only one I noticed that will run at 4 Ohms will be the smart 3 tar amp I has the best efficiency out of 3amplifiers,but I'm afraid that I get what I paid for and I'm confused to wish one I should get my mind is telling me to go with the kicker kxa 2400 because its great efficiency throughout the range. If I'm unable to run the speakers at 4 Ohms then I was going to go down to 2 ohms the kicker is way much stronger due to the fact that is 2400 watts and my speakers only handle 400 watts RMS each but I could always tone down the amplifier which of the three amplifiers would you recommend again I'm running for 8in fierce Toro subwoofers. Any help would be greatly appreciated PS keep up the good work I'm loving your channel is helping me tremendously on deciding what to do with my Jeep.also a ported box 33hz a quadzilla ported box.I believe the power is underated on the fierce toros and they easily can handle 500rms.Helppp
You know it's hitting hard when the camera flex
Yeah testing out that optical stabilization
Taramps killing the game I bet all audio companies crazy at work 😂 then here comes smart 5 and smart 8
*flashbacks to taramps catching a fire* the ptsd
Jk ik they fixed that problem i think
Lxrd Vader that was then lol this is now
i got the smart 3's and cant wait to get my hands on a smart 5 or 8 :)
Have you ever tried torture testing that massive boa to see if it can really handle 6000 watts rms?
As soon as I get it in a proper box I will. I think 6000 watts is gonna smoke this joke honestly
@@wal in that case have dick riculous test the sub
Can you dyno test the soundqubed u series amplifier? Thank you sir.
I'm deciding on a compact high power amp. DJ Magic Mike and Techmaster P.E.B. have always provided some killer deep bass music to push the limits. Techmaster even recently came out with a new album and is coming out with another supposedly.
Made in my Brazil. 🇧🇷
You own Brazil?
Yes
forget that amp.... I'm digging the the sub!!!!!!.... you can see the box getting ready to come apart...more power and that box would have gave up the ghost
The port area requires was incorrectly stated in the spec sheet/manual for this sub. I had the box built to spec and it is not correct 👎
I bought one of the "new" (to me) IGBT inverter welders and it does the same thing, shuts off before the current destroys the welder. I thought it was just over-rated and didn't expect much, so when it stuck a rod without melting it I just thought it was lack of power but what caused me to question that was it would pull an arc like 2" when I pulled the rod away from the work (that's a lot of current).
Can you do a review on the TARAMPS TS2000X4 please
WHAT DO YOU THINK ABOUT TARAMPS SMART 3?
Good amp
@@wal OK, THANK YOU FOR YOUR SUPORT.
@@wal I'm ordering a new amp soon as I decide which to order... (I'm a very indecisive person) Would appreciate your advice on the following two amps: Taramps Smart3 or the Rockville dBcomp5 3500 rms amplifier? Which amp would you suggest I choose?
I have the 3 smart on 2 12s pioneer 2000 wats max, and it goes in to clipping real fast at 1 ohm...
@@bertgutierrez5839 where do you have your gain set at? Are you sure it's set near accurate with your headunit? Also are you using the bass boost or the knob beside the boost? (I believe it says bass freq) Only asking so I can try & help you with why your amp is clipping so easily.
Bert I actually did end up buying a Taramps Smart3 & that is what I've had in my car for right at a month now. I am running it on a single Skar ZVX 18" dual 2 ohm subwoofer wired to 1 ohm. I have not yet had any issues with clipping or the amp getting hot. I can play very bass heavy music for 45 mins & longer right at full tilt with the volume knob turned just one click below clipping without any issues. During long hard increments of playing bass heavy music the amp does not even break a sweat. Never went into protect on me. (I say all this while knocking on wood lol) My gain on my Smart3 is set right at around 40% set along with the rca voltage of my headunit. And trust me my amp has really been good to me this past month! I have a brand new nice Korean amp 3500 rms that I haven't even took out of the box yet as the Taramps has been doing great on my temporary single 18 setup. I am switching to an 8 cubic feet custom ported birch enclosure that will be housing two new 15" subs in approx. 2 to 3 weeks. Currently waiting on the wood to be cnc cut to my specs & then I will be using my new Korean amp to break in my two 15s. After broke in I will be putting an 8k on them @1ohm.
Burt I hope you are able to get your Smart3 straightened out or dial the tune in better. I know that's gotta suck with it clipping so much! Lmk if their is anything else I can help you with.
I would like to see 6k on that massive..it would be slamming out of the box
It looked like 3k was all it should take if ya want that sub to last long😂
@@StevenStGelais he said it was 6k rms
Great review can you give me an idea of what this amp will run at 2.6 ohms?
Absolutley incredible!!!!!!🤯🤯🤯🤯🤯
Mind = Blown!
Tem mais algum brasileiro aqui ?
Opa sou autorizado da taramps campinas sp
Smart3 vs smart3 bass?
Bass is a little better
@@slimakareak9704 non of them are good. I sold the smart 3 bass. Plenty of power but sound quality sucks
@@Banshee421x yea Im going with Rockford Fosgate what you think about DD audio amps
@@slimakareak9704 I never ran dd before. I was trying to replace my sundown 2500 but a smart 3 is not it.
@@Banshee421x cool sundown is always the way to go 🔥🔥🔥👍🏾
Impressive test thank you. Can you do a MD or Bass series test in .5 ohms next? Nobody has done it.. You would be the first! I will buy one of your shirts. That is my word!!!
I think Taramps has got enough love here for a couple of vids. Need to move on to another brand. I’m pretty sure they won’t do Dyno at 0.5, but probably the subwoofer Wired at 0.5
Can you do the recommending of budget 5 channel amp?
in brazil its only taramps, soundigital, stetson and banda, the rest is shit
What most people don't realize is a tuned box and amp will have more than enough bang at a fraction of these watts.
No one believes me when I tell them all I have is 350 watts for my bass.
Good tune box for the sub and good tune for the amp. 350 watts probably sound like a 1000 watts.
@@Silkmaster4200 Makes my ears hurt a little. In my opinion that's a touch more than enough bang.
Some people prefer sealed boxes over ported because of their "intant" transient response playing music accurately, instead of big ported loud and sloppy delayed boxes. then theres a balance, a ported box that sacrifices a bit of output for SQ. it all depends on your trunk space.
Got at 500rms at 1ohm with a ab DLS amp and and a 1,5ohm single 12" im my car... 2ohmDual coil Made 138,4 db at about 58hertz, with a closed box last summer... Makes the interia rattle and wipers jump when it rains... Plays good drums musically but when it gets low... Mmm
Can you do a review on the 5k? I got twice the sound from the 5k.
What pin adapter are you using on the power wire? I've purchased a couple that are supposed to be 1/0 to 1/0 and they do not fit into the power input which I thought was supposed to accept 1/0 wire? Please let me know?!? Thanks for the great videos! Keep up the great work! Have a safe, happy, and blessed holidays!
dual 1/0 to 1/0 just grind it down to fit
Unfortunately still a Brazilian. I had a MD5K and swapped to a Wolfram W3000.1 (Korean) and the quality and authority of the bass is much better.
Justin C. If wolfram was Brazilian you would say the same thing.
youre just experiencing the difference in preamp circuits, and steeper roll off of higher bass.
lol i just swapped from wolfram w3000.1 to this and not going back to the w3000.1
2nd
Ha ha 😝
Budget Gem guy we need more new videos from you.
@@25hztolife86 I have 1 that needs to be edited... and a whole slew of amps I need to test after
Hey Big D how is that Northstar battery on the floor in your video
Cheers from Boston 🥃☘️
👌😬👍
Garbage amp with power what's the efficiency 46
The efficiency on these is usually pretty high
Efficiency is 79 percent on this smart 3k model
You missed the whole point of running a full bridge amp it seems 🤦♂️🤷♂️ they are usually(not always) more efficient than a half bridge amp and that’s the point of full bridge somewhat. The smart 5 does 6241 watts rms certified at 2 ohms. Pulled 472 amps at 14.22v which gives you an efficiency of 93% roughly
And this exact amp is pretty damn efficient
@@LaggerVidz but korean amps most good 1s have a really high dampening factor like 200 to 500 wich makes ur sub sound better snd alot more control.
Man I really wish that you would dyno the Fosgate t20001bd,can’t find a video nowhere
Hey big d I was wondering if you could test out 1 of the new sundown full bridge amplifiers and see how it sounds on a subwoofer for us ?
I just bought one of these and it’s on the way, I have a 240amp powermaster alternator and 1/0 big 3 done, but only 1 battery, will I still be able to run it? With my current MD1200.1 I get no voltage drop, even with the amp pushing it’s hardest and front and rear ac on full, low and high beams on i still get 14.6 volts
Big D do you think dat 12k will push 4 18" Skar 1 ohm subs
Hay big d 👍 yr videos i have a question do u hook a autotek mm 222 the same as a autotek 333mm with the switch underneath for 1r2 chainals
Also how you said about the holes being small I started out with a taramp 5k but I felt was a little much for my single sub and the 5k is 1/0 gauge wire and I have sundown ofc wire and I traded for the smart 3k and went to hook it up to the metal multiple converter to run to my extra battery and realized it was 14 gauge wire so I took the metal 1/0 gauge connectors and sanded it down till it fit the 14gauge hole because I wasn’t trying to switch 14gauge on a 3k amp and only a extra xs power d6500 (4k 85ah) battery to power the 3k because I paid a lot of money for 100fr of 1/0 ofc sundown wire so I wasn’t taking it out and my mids amp are hooked up to my front battery.
I've been running my smart 3 at .5 ohms for well over a year now and I haven't had a single issue with it whatsoever. I even bought it used for $150! I think as long as your electrical is solid you shouldn't have any problems
Yes the amp has built In current limiting to protect it at low ohm loads
What would you do to your electrical?? Just a new battery or alternator as well?
I did both! I've got three 50ah agm batteries and a 320 amp alternator. At full tilt I maybe drop half a volt at idle and none at all when I'm driving.
@@wal It definitely does limit the current. The amp puts out a lot more power at .67 than at .5