LG WM2101HW Front Load Washing Machine Won't Turn On Main Control Board Replacement
Вставка
- Опубліковано 26 сер 2024
- My 11 year old front load washing machine quit on me in the middle of its wash cycle. I tried resetting the computer but it did not work. My only options were to call an expensive repair man or go buy a new washer/ dryer set. But then my light went off and I decided to tackle the job all on my own. I'm sure glad I did because it only took a fraction of the cost and a little bit of time. I hope the video helps you out and thanks for watching.
Thank you, thank you, thank you. Our machine wouldn't turn on and I did what you said by unplugging the washer and holding each button down 5 seconds and plugging it back in.
Praise God it worked. You saved the day!
Great job on the video! I followed the instructions exactly and was able to fix my friend's washer. She's back in business and we saved alot of money. So many inciteful individuals on youtube. I love it!
Glad it helped
You make it seem so easy unhooking these wires is nearly impossible.
Wish i had watched your video first. The harness pissed me off so bad i had to step away because i found myself daydreaming of cutting off all the wires to pull out the motherboad box.😂
Glad I found this video, got my board fixed and washing machine running, thanks for the video!
How much did it cost you?
First off - great video! - just finished reinstall and am doing my first run. Next - dude you must have gorilla grip fingers! I ended up carefully using a pair of small channel locks. I found a slight wiggle, side to side as you pull sees to helps. Another thing that helped me get the controller to a "easier" working position was to squeeze and push in the blue plug from the back of the machine - it will let you pull the wires out of the way a bit. Again great job and thank you for postiing!
Amazing work, my washing machine has the same problem, I have check everything and tried every trick but it looks like is the mother board which is very expensive
Reset the computer like you showed and it worked! Thanks!
Before you replace the Power Control Board watch the other videos on you tube about fixing LG front load washer, that will not turn on, very cheap? Probably the PCB is a very expensive part! There is a capacitor in the PCB that can be bought for $5-10 bucks! 1 video has link to buy part! Part needs to be Soldered in, if you can not then call a friend! lol The diagnostic test that all those videos showed was leave washer plugged in open door spin the drum and if the lights on display light up briefly, and it chimes, as drum spins, then this inexpensive fix works! Other than this guy did not know about this additional test and money saver trick, this is good video! SAVE CASH GOOD LUCK!
Believe me I would have loved to save more money.
Where can you buy the capacitor?
excellent, just got a new LG washer 2yrs old, only needs that same board
VERY WELL DONE, GOD BLESS
Great short video thanks
Where are you guys ordering the motherboards from? I have the same power issue. Sounds like an LG recall that needed to happen but didn't.
Thank you! Great video!
Does that board control the temperature as well?
I believe so, this is the main mother board for the whole unit.
Is it possible to repair the broken piece of i.c. in a motherboard?
I am sure it is possible. But this was much easier for me to do. My wife was needing to do laundry and this was the quickest fix. Thanks for watching.
So i brought a new motherboard just came in yesterday plugged everything back up put a load I. And the same thing happened again midway thru it cut off and won't cut back on 😩 any idea as to what it maybe maybe??
Really hard to tell without being there to put my hands on it. Was the board used or new?
It was used soon as I plugged it in the lights came on maybe 10mins later it won't come on anymore like i blew it again smh 🤦🏾♂️
@@jjayno2003 So, I bought mine used also and it is still going strong, I may have to asssume that the new (used) one may have gone bad, just some bad luck I would assume.
Did you test the noise filter? That's another common problem. Power goes through that first.
@@bradshannon862 yes I did!!
ok you forgot to mention the most important thing.
part number where is it located mine is almost the same but the numbers "3357" are different mine EBR32268007 IS THIS THE PART NUMBER OR WHERE
bro called the washer a computer