Це відео не доступне.
Перепрошуємо.
New Snap-on FH100 3/8SQ 100-Tooth An ambitious work that opens the next door
Вставка
- Опубліковано 26 січ 2024
- New Snap-on
FH100 3/8SQ 100-Tooth
An ambitious work that opens the next door
New Snap-on
Grip is thicker
It's shorter
Approximately 8.5 inches
About 1 inch shorter
MAC TOOLS
Same length as standard size
9.5 inches to 8.5 inches
It seems like the grip has gotten thicker and there are more hard parts...
The head is much thinner
Approximately 12.1mm
Now has the same thickness as Matoko BFR88
This is what it looks like compared to Nepros
NBR390A
NBR390
FH100
NBR390X
This evolution is huge
The logo has a nostalgic feel
The screw that holds the back cover has been reversed.
Older models such as FH936A and F830
now facing the same direction
It's my personal imagination
FH80 is for appearance and design reasons.
Structure that locks from the back cover side
I think it has become
As a drawback of FH80
When I cut off the screw that holds the back cover
If you damage the threads on the body side,
It tends to be lifespan...
In most cases, the thread on the screw side will collapse.
I think it's well thought out...
The old structure
If you change the lid
He revived many times
FH100 is happy to be immortal again
The sound has changed a lot
It's a sound that sounds quite different inside.
I think the idling is a small difference.
It feels a little heavier
The gear pile should be lower.
I feel like there is some resistance to going beyond the notch.
I think the spring has become stronger.
look inside and get confused
TorxPlus 9 IP9
First public release!
Seems simple?
Does it seem complicated?
The switching knob is a little stiff
Ko-ken's structure
Do you feel like you've progressed further?
Fixed center type
Incorporating a wedge structure
Same as contributor
I feel like it's the principle.
It's gotten thinner!
Very cool
Very cool
The heart of mecha lovers will be excited!
A drastic change!
Parts with complex shapes
each part
Made with precision
Chief mechanic of Kobayashi Motors
Mr. Yuta Kobayashi
To the mechanics of Kobayashi Motors
I touched it a little
This time it was a short time
I couldn't hear the details, but
I would like to hear more from you in the future.
I am thinking
President, thank you very much.
Snap-on
FH100
Don't disappoint
go beyond expectations
King's innovation
Precise and well thought out parts
The heart of a mecha lover is excited
It's now 100 gears
head is thinner
Grip is thicker
The length is...
Each change is
It's not that big though
Overall the best and above and beyond
I think it's finished
Big changes for low-key effects
As expected from the number one brand
I can feel your presence
Snap-on FH100
represent the next era
I think it will be Ratchet
Kobayashi Motors Channel
/ @kobamo1968
Kobayashi Yuuta-kun [Kobayashi Motors] X
/ kobamo1968
#ratchet #ratchet
#mactool #mactool
#matcotools #matcotools
#HandTools
#Ratchet
Great visual detail on your video. Probably the best video to be able to see this new ratchet. It fills me with pride seeing two different countries being able to appreciate each others tool designs. Thank you for the content.
Thank you for writing a comment.
The FH-100 was a very nice ratchet.
We are grateful to America for providing us with so many wonderful tools.
I guess if your a professional mechanic you can justify paying the cost. Definitely a very cool and interesting design. Looks like the borrowed some of what koken has done with there design.
うーん。クイックリリース式だったら即決でしたが、スナップオン特有のショートソケットの脱着しやすさ次第で買います笑。
コメントありがとうございます。
個人的な予想ですが、将来的にこのタイプに置き換わる可能性が高いと思います。
これからスナップオンデビューな方には文句なくFH100をおすすめしますが、
FH80を所有している方は無理に買い替えなくとも良いように思います。
しかしさらなるプラス一本と考えると「少し短い」など、微妙な違いが生きる場面も多いと思います。
フレックスタイプは現状でも手に入りますし、ロックボタン付きなどいずれはフルにラインナップされていくと思います。
あれこれ考えている時間が最も楽しい時間かもしれません~楽しい時間をたっぷり楽しんでください~~~
何か、緊急特番みたいで笑えた😊
スナップオンにベラプラスなのがシンパシー😂
9:27 突然見慣れた顔が出てきて😮あれっ?、、、いつの間にランダム?(笑)そーゆー関係なのね😂
う~ん、最後のまとめ
これでスイベルが1/2の薄さで面積も1/2なら納得するけど
Great video
Thanks for watching always.
ギヤが細かくなりすぎると、逆に押し付ける力が無いと歯がスカるのでバネをより強化してるでしょう。そうすると空転トルクが上昇してしまう。結局は72ギヤが今日主力なのは強度と機構のバランスが良いからでしょう。空転トルクが低いのがいい人は60ギヤぐらいが限界じゃないでしょうか?
コメントありがとうございます。
全く同意見です。
STRAIGHT(ストレート)さんの60ギアシリーズがとても良く出来たラチェトに仕上がっています。
個人的にはSTRAIGHT(ストレート)さん史上最高傑作だと思います。
ストレートさんの60ギアシリーズ、近々紹介しようと思い準備中です。
Snap on makes beautiful ratchets , there's no doubt about that. They are just way too expensive for me. I really like there roto/ swivel head ratchet (fnfh100 think) maybe i can find a good price on a used one. Great stuff brother, thank you for the video.
Thank you for writing a comment.
I'm glad if you liked the video.
It's true that Snap-on is expensive.
I collect mostly used items.
It's been a while since I bought a new product.
I went a little far in purchasing the FH100, but it was a great ratchet worth the price.
@@mono-story ya, no problem man, I do not speak or read Japanese, but I like to watch tool videos and I am also a fan of Japanese tools and tool companies.
I'm glad to hear that you are interested in Japanese tools.
The full text of the caption is posted in the video summary section, although it is in Japanese.
If you're interested, try translating it with Google Translate.
何時から発売するの?
正規国内販売がいつになるかは分かりません。ファクトリーギアさんでも1月26日現在ではサンプルもまだ届いていないとのことでした。