I've always made my own iron oxide (rust) for over 15 years now. I put about 3 or 4 rolls of 0000 steel wool into a quart jar and fill it up with vinegar and put in the window for a couple months. When it's all turned into a big mess, I pour it out into a flat pan (11x14 photo processing stainless steel pan) and wait for a couple of weeks for it to dry. Then I use a single edge razor blade to pulverize it into a fine powder and store it in little (snuff) tins. Every batch I've done comes out a little different color. Works great 'cause it's real rust. To use it on models, you can mix the powdered rust with some lacquer thinner and apply as much as you want and adds a lot of texture to the surface. Cheers from eastern TN
Been doing this for decades! I. Leave the jar open to dry to a powder. Use as a pigment. Its an old woodworkers trick for ebonizing wood. The liquid is great for aging wood for dioramas.
I ran across your video yesterday looking for a rust weathering technique. It was perfect as I has steel wool and lots of vinegar. I let it soak overnight outside. It didn't look like much today, but I could see some rust color on the wool. It brushed on clear, but dried in minutes. WOW, perfect rust patina that popped when it dried! I don't have the chunkyness of yours yet, but I'm going to seal it up and let it sit for a few months and see what happens.
I'm glad it worked so well for you! If you're going to leave it to develop, just check after a week or so. It requires oxygen for the reaction, so if you "seal it up" as you mentioned it might stop the process - just check after a week, and if it's not doing anything maybe open the jar and see if that gets it cooking again :)
Derek McNulty hey mate, I don’t bother sealing it. You certainly can, although it does darken the effect and removes quite a lot of the subtlety. I just leave mine as is, and try it to handle the finished model.
That's a genius technique, using real rust to make rust on a model. There isn't much better than the real thing! Just like using real mud on a model too. I really like the actual texture that you get with it, like you said it does look like how metal gets when rusty when it kind of bubbles up and the primer or whatnot starts to peel off when the rust gets underneath. That's something that's hard to get with pigments since the powders are so fine, which of course has its own benefits. I'll shoot you an email about another idea I've been having.
Oh and if you're worried about the fumes, we did this kind of reaction in my Chemistry class and you're probably getting Hydrogen Sulphide or other sulphuric gases. They won't kill you but they could make you a little sick for a day or so if you breathe in too much. So probably not much worse than your average paint thinner fumes we deal with :)
Thanks Panzermeister36! Yeah, that texture is quite interesting. I love this technique for big, chunky rust - it can be a little heavy-handed for fin streaks, but it's do-able. Chat to you soon, Dave
(Hubby here) Dave genius! Great tip for a guy like me who loves to "experiment". That's the main thing I love about the modeling community - the sharing of information.
This is a great technique! I mixed up some and it is fantastic! Your caution about the lid is right on. After letting mine sit for a week, tried it, great outcome but I pulled a dumb ass and when I put it on the shelf above my work bench next morning the stuff was all over my bench! Dummy here tighten the lid. So yes do not tighten the lid when your done. I have started a new batch that I intend to use on Panzer II I'm working on.
Hi Sooner Steve, ah, mate, that is not good. I've been lucky and haven't spilled this stuff yet, but I imagine it's an absolute *&^%$ to try to remove the stain! Dave
I really love this video! After finding a blatantly fake "restoration" video in my recommends, I was discussing with my boyfriend how we can make rust paint from vinegar and steel wool. BOOM, the perfect video to demonstrate exactly how it looks and works! Miniatures and models are an entire world of fun in and of themselves! Yet i always fantasize about creating wonderful films; using scores of minis and models to bring life and a real environment to fantastical places, relived moments of history, the seemingly impossible done in real time. I think these types of props, used properly, can be far superior to the CGI worlds most (edit: modern) movies seem to be made of... There's such a charm to a world recreated, it's something a collection of data files just isn't.
This is a great tip! Those weathering kits are pretty expensive. I just left my steel wool outside in vinegar. I have an Amtrak locomotive that has a smear in the paint. Hiding it with a rust stain will be a perfect solution.
I finally got the rust, but just used water sparingly & ended up with a kind of powder which work great with wet brush..but I never have tried without this video so thank you sir!
Hi Kent, you can seal it with a clear coat after you have applied it, not before. Be aware though that the rust will get darker, and lose some of its subtlety.
Hi Antidoto35, yep, that's all you need to do. Mix vinegar and steel wool in one bottle, and leave it for maybe 2-3 days. A week would be better, but 2-3 days would give you a useable rust. Cheers, Dave
I have used rusty old metal from an exhaust pipe in the past. It gives you rust colour but without the texture bits. This method looks really good though.
Although 2 years ago but great tip. My question is can i spray seal on this? Coz im guessing these rust is not permanent over long period of time? Or can get removed when your cleaning the model from dusts for example.
Hi Peter, you can seal with with dullcoat but it will darken the rust, it looses a lot of its subtlety. Better to just leave it unsealed and be careful when cleaning.
Great economy tip Dave. I go a little cheaper, by useing worn out S.o.S pads. Once I have scrubbed the soap out cleaning something I put them in a container with water to dissolve what's left in a jar. Never used vinegar, but that works fast it seems. Loved the texture. My Titanic wreck model 1/ 700 will require a sea floor covered in rusty bits. I plan to blend the wet plaster with some pieces of rusty chuncks , letting the rivers of rust run to the low spots. Like the R.V. footage in the pictures. This is a perfect shmutz to spread all over the wreck! Thanx for sharing Dave.
Lance Caldwell that sounds amazing. I can’t wait to see your Titanic diorama. Will you replicate the water in any way? (Which sounds like a nightmare, btw!)
Excellent video! I actually have a jar of this sitting right here - I mix it up tho, for the liquid. If you paint actual wood (like popsickle sticks, matchsticks whatever) it chemically reacts with the wood and turns it dark in various shades, great for a worn look in dioramas etc. I'd not thought to use the solid left over bits as well! Definitely going to try it out. Thanks very much!
Interesting and very well detailed. Came across this when looking at rc scale crawler body painting and the channel linked this video as a recommendation. As water gets rid of it, I assume a form of lacquer on top (even cheap hairspray) will protect it a little from the elements when taking the rc trucks out into the wilderness through some watery splash conditions?
You would definitely want to seal it somehow for a RC truck that's going to be exposed to water, grit, etc. Hairspray is water soluble, it will eventually wear off. you'd be better with a matte clear coat of some kind, but be aware the clear coat will dull the effect a little, it will make the rust darker and it will lose some of it's subtlety.
Love the technique! Long ago I used to thin out flat/matte enamel paints to use as a fixative for clay dust "mud" and "bearing grease ooze" on AFVs. These days I am more fascinated by STEAMPUNK and your Steel Wool Rust is Perfect for that kind of Nitty Gritty... Once dried overnight, the rust could potentially be tinted and/or moved around with a fine brush, using the thinned enamal fixer I mentioned above. Your vids are Aces Dave.
WOW thanks for all these "make your own" its amazing i'm new at this (1year and 1/2) and i still make ugly effects with pigments i buy but after this video my scale models are so good. Huge thanks from me :) Keep it up
Painted on to anything the result should be similar. I'd be hesitant about painting it onto paper, perhaps, purely as it is such a liquid it would soak in a lot, might distort the paper?
@@DavesModelWorkshop Yes that would be obvious, but the paper I'm using is a sticker paper but I assume it'll have the same result. Thanks a lot! I love a good penny pinch.
Hi John, you certainly can airbrush a matte clear coat to seal it in if you expect to be handling the finished model much. But it will make the rust darker, and you lose a lot of the subtler tones of rust. i never bother to.
Great video, I love the texture of the rust, would love to try it myself. Either with vinegar or water as another user suggested. One question has been on my mind, what material would you use to seal this in?
If you wanted to keep the larger rust flakes would a couple mat clear coats protect them? I’m thinking of going really heavily on a lexan RC crawler body... Looks ace!
I generally don’t fix them in place, I just try to not handle my models once the pigment is in place. If you do want to seal the pigment, I recommend any matte clear coat. But be aware it will darken the colour of the rust, and make it a bit less subtle.
I've found an acrylic craft paint that looks incredibly like rust. It's called Espresso and Latte which translated means coffee and milk. I use it on all my railroad wheels. Cheers from eastern TN
WOW! That looks really great and so cheap too, well done Dave. I might just give this a try and see how I get on with it. Many thanks for sharing this top tip with us today. Have fun, Joe
Being 'cheap' means that one's creativity is set free...this is what separates one from the pack I would think. Splendid work Dave! Cheers from Roswell New Mexico.
Cheers Dave. Sorry for the tardy reply, I forgot to check back! Doh! I've 4 jars on the go. 2 with white vinger, (one jar 1/2 full the other full), one tap water and one rain water. The best so far, is the 1/2, full vinegar. Can't wait to try it!
If you're trying to show chrome with some rust flaking through, I would do it with rust coloured paint and some rust coloured pastels streaked underneath.
TerminatorFiles I don’t bother sealing it. You could spray a Matt varnish to seal it, but I find this makes the pigments darker and less subtle. I just try to not handle the finished model too much.
I did just as the video suggested and used steel wool and apple cider vinegar. It's been almost 2 weeks now and nothing. The steel wool still looks brand new.
Interesting and effective , just out of curiosity,,, have you ever tried ordinary steel wool , I use it all the time , you can use it in strands ,bundles s per size required , chopped up and dusted, mixed with water based glue,, works a treat
You can apply to anything, been doing a full upgrading on a Heng Long Tiger one and used steel wool on the metal tracks … just get the tracks fully covered in very fine steel wool and leave to rust up, the finish is great even if I say so myself .it is real rust ,on the hull I used very finely chopped up steel wool placed were I wanted rust and that did the job ,again real rust and it does not take that much longer to produce a result .You'll need to figure out application mediums (ie plain water, water based glue etc) for your particular needs/requirements and dependent on the subject but I found it works on die cast model cars ,even told friends of mine that build car dioramas and they love it , everything I tried its done the job so far. obviously if model is to get wet then use a medium to protect the rust finish . Have found its easier,,, by far than messing about with paints etc but in saying that I have also used these rust paints with the wool and the results are great. I all depends on the finish you want. Please have a go and let me know how you find this method
That sounds amazing! I'm definitely going to have a crack at that. So you just cut it up very, very finely? Is it almost powdered by the time you're finished cutting it? Fascinating!
you can use it as strands ,lumps , fine chopped , course chopped, it all depends on what application and /or finish you are looking for or just add water or tinned out water based glue. Don't forget there are different gauges of steel wool ,
Did you clear coat the model before doing this. I pretty much exclusively use acrylic paints and am wondering if the liquid part would do to much damage to the paint
No, I didn’t clear coat first, but as long as your paint has dried properly I can’t see the rust liquid affecting it. Maybe try on an inconspicuous section first?
Hi This is a great video. I decided to try and make rust myself, using the steel wool and vinegar method. But how long does it take? I put a roll of steel wool in a glas jar, covered it with vinegar, but until now I can not see anything has happened at all. Its only been a few days though, but how long time (approx) before I can use it?
Thank you. Mine took about a week. Some people have reported longer, some shorter, and a very few unlucky people haven’t had reactions at all, I guess it depends on the atmospheric conditions and/or the wire and vinegar used.
Wonderful weathering job Dave! looks so realsitic! i have 1 question... yesterday i tried making it my self and in the jar, i placed the steel wool and filled it with white vinegar but today i saw and happened nothing 🤣🤣 how much vinegar is required??? Love from Greece!!!!
I used about 150-200ml of vinegar in the jar you can see in this video. I basically put the steel wool in, and poured in as much vinegar as the jar would hold. i hope this helps.
Does this rust have to be sealed to keep it from rubbing off? I love the realistic look, but is it for things that won't be handled a lot only? Thanks so much for sharing this!
Yes, the rust does go on top of the finished paint. And yes, you can add a clear coat over the rust if you wish to. I don't bother, I just try to not handle that part of the model and it stays on just fine. But if you are going to be handling it, add a clear coat - just be aware that it will darken the rust colours, and you will lose some of the subtlety of the rust. Cheers, Dave
@@DavesModelWorkshop... I’ve made my rust jar up and drying some earth out now...on my second build now.... bought a cheap airbrush and had great fun practicing and using on the first model and trying and making my own pin wash and other wash out of oil paints... all new techniques to me and from one of your commandments.... it might not be to any winning standard but to me who looked at models in the shop and thought I wish I could .... it brought satisfaction to me and will learn from the mistakes and have the confidence to try anything.... I might be sad but I actually don’t mind cleaning my airbrush 😊
I don't usually bother to seal it. If you are planning to handle the model you certainly can seal it with a matte clear coat of some kind, but be aware the clear coat will dull the effect a little, it will make the rust darker and it will lose some of it's subtlety.
I’ve also tried you dirt, mud, and flat earth mixture to get mud effects. And loved it but instead of flat earth I used burnt umber Acrylic paint and also liked the effect. Cheers fro Canada
I tend to find that if I create a really nice, subtle finish with pigments it will eventually come off over time . When you have an effect that you like a LIGHT spray off TS-80 clear cote from a distance of about 12" just keeps everything fixed and doesn't change the colour . But remember when it's fixed, it's fixed so make sure you are happy first. Loving your stuff Dave , lots of inspiration thank you.
Hi Dave. Hope all is well with you. I thought I would try your diy rust, but it's been sitting for a week an nothing seems to be happening ??? I used steel wool did have some soap put in not it out of the box. But I washed out all soap dried then started the process. But as of yet I have had no changes no rust, but a funky smell as u said there would be. So it was outside for the first couple of days. Why is it not working vinegar, steel wool cleaned an dried. Start the process, NO reaction ??? Cheers Mate. Scott
Dave's Model Workshop Hi Dave thanks for your reply I just got a small bottle of vitamins, an put 1 steel wool pad it was about 3" by 1 half inches, pulled it apart stuffed it in then filled it up with about 100 mls of vinegar. I have most likely put to much steel wool. Cheers Scott.
It will, but it's much better as a "sludge" rather than a thin liquid. Maybe try to evaporate some in sunlight for a couple of days, see if it gets thicker?
Could the final finish of all the effects be sealed for durability? If so what would be used? Please excuse as I am a complete beginner in this kind of painting jobs. Thanks.
You certainly could, definitely. I would use a matt clear coat, something like Tamiya TS80 spray lacquer, or any kind of matt varnish. The only potential down side would be it *might* make the rust tones a little darker - do a test first and see. Hope the sub turns out great :)
You certainly can airbrush a matte clear coat to seal it in if you expect to be handling the finished model much. But it will make the rust darker, and you lose a lot of the subtler tones of rust. I never bother to.
Brilliant ,im away to my shed with my scourer and viniger,i think it will look good on tank exhaust s. better than the old bicarb of soda and glue technique ive been using
I've always made my own iron oxide (rust) for over 15 years now. I put about 3 or 4 rolls of 0000 steel wool into a quart jar and fill it up with vinegar and put in the window for a couple months. When it's all turned into a big mess, I pour it out into a flat pan (11x14 photo processing stainless steel pan) and wait for a couple of weeks for it to dry. Then I use a single edge razor blade to pulverize it into a fine powder and store it in little (snuff) tins. Every batch I've done comes out a little different color. Works great 'cause it's real rust. To use it on models, you can mix the powdered rust with some lacquer thinner and apply as much as you want and adds a lot of texture to the surface. Cheers from eastern TN
That's fantastic! Thank you for sharing your tips. Cheers from Melbourne, Australia - Dave
Been doing this for decades! I. Leave the jar open to dry to a powder. Use as a pigment. Its an old woodworkers trick for ebonizing wood. The liquid is great for aging wood for dioramas.
Hi Jennifer, that's good to know about leaving it open to become a pigment / powder. Nice one, thanks for sharing :) Cheers, Dave
Jennifer how long does it take for the solution to turn into powder?
Ohh... I love that Idea for aging the wood! Thank you Jennifer!
Ah, that is exactly the bright orange color I needed, and I get to play mad chemistry! Excellent !
Good to hear!
Is there a way to make it stay on for good , like glue or a top coat?
Just getting into modelling and this rust effect is by far the best I have seen. Thanks Dave, I’ll try it out
Thanks Daniel!
Daleko od oduševljen... Veliko poštovanje za ideju. Za nekoliko meseci idem u penziju i ovo bih radio. Hvala puno.
I ran across your video yesterday looking for a rust weathering technique. It was perfect as I has steel wool and lots of vinegar. I let it soak overnight outside. It didn't look like much today, but I could see some rust color on the wool. It brushed on clear, but dried in minutes. WOW, perfect rust patina that popped when it dried! I don't have the chunkyness of yours yet, but I'm going to seal it up and let it sit for a few months and see what happens.
I'm glad it worked so well for you! If you're going to leave it to develop, just check after a week or so. It requires oxygen for the reaction, so if you "seal it up" as you mentioned it might stop the process - just check after a week, and if it's not doing anything maybe open the jar and see if that gets it cooking again :)
Sounds good. I can leave it out on the porch and see what happens. Thanks!
U must be a man of meny women with techniques like this thank u for your honor and wisdom 🙏
Bwahaha, we all know the scale modellers get all the ladies! ;)
Hi dave,
Same question as Michael. Do you seal/clearcoat afterwards ?
Derek McNulty hey mate, I don’t bother sealing it. You certainly can, although it does darken the effect and removes quite a lot of the subtlety. I just leave mine as is, and try it to handle the finished model.
That's a genius technique, using real rust to make rust on a model. There isn't much better than the real thing! Just like using real mud on a model too. I really like the actual texture that you get with it, like you said it does look like how metal gets when rusty when it kind of bubbles up and the primer or whatnot starts to peel off when the rust gets underneath. That's something that's hard to get with pigments since the powders are so fine, which of course has its own benefits. I'll shoot you an email about another idea I've been having.
Oh and if you're worried about the fumes, we did this kind of reaction in my Chemistry class and you're probably getting Hydrogen Sulphide or other sulphuric gases. They won't kill you but they could make you a little sick for a day or so if you breathe in too much. So probably not much worse than your average paint thinner fumes we deal with :)
Thanks Panzermeister36! Yeah, that texture is quite interesting. I love this technique for big, chunky rust - it can be a little heavy-handed for fin streaks, but it's do-able. Chat to you soon, Dave
Dave's Model Workshop It seems you could also add pigments,paint etc to the homebrew?
Definitely. I'm not sure how much you'd have to add to influence the colour, but it would be a fun experiment to play with :) . Cheers, Dave
Panzermeister36 cinnamon works well to. Just delute white glue brush it on and sprinkle the cinnamon over it. Looks great when it dries
(Hubby here) Dave genius! Great tip for a guy like me who loves to "experiment". That's the main thing I love about the modeling community - the sharing of information.
Fantastic crafting tip! Thank you very much! This will definitely help with what I needed it for. Cheers!
It's a great effect. My question is how would you seal it? I play tabletop wargames and everything is gonna be touched....often.
You can seal it with a clear coat, but it will lose some of the subtlety and the rust will get a bit darker.
This is a great technique! I mixed up some and it is fantastic! Your caution about the lid is right on. After letting mine sit for a week, tried it, great outcome but I pulled a dumb ass and when I put it on the shelf above my work bench next morning the stuff was all over my bench! Dummy here tighten the lid. So yes do not tighten the lid when your done. I have started a new batch that I intend to use on Panzer II I'm working on.
Hi Sooner Steve, ah, mate, that is not good. I've been lucky and haven't spilled this stuff yet, but I imagine it's an absolute *&^%$ to try to remove the stain! Dave
The thing i like about your vids the most is that you make it the cheap way,nit thr MOST EXPENSIVE like other youtubers
Heh heh, I do love to do things the inexpensive way if at all possible!
Nice video, what kind of material is this model? Will it have the same effect if I apply it to plastic? Thanks.
Hi, awesome tutorial, could please post a link to purchase the little jar where you put the steel wool in?
Thanks you in advance!!
I think it was just a baby food jar, nothing special.
Thank you! What products is in it?
@@edcaz-v4x sorry, I can't remember, the video was 6 years ago...
I really love this video! After finding a blatantly fake "restoration" video in my recommends, I was discussing with my boyfriend how we can make rust paint from vinegar and steel wool. BOOM, the perfect video to demonstrate exactly how it looks and works! Miniatures and models are an entire world of fun in and of themselves! Yet i always fantasize about creating wonderful films; using scores of minis and models to bring life and a real environment to fantastical places, relived moments of history, the seemingly impossible done in real time. I think these types of props, used properly, can be far superior to the CGI worlds most (edit: modern) movies seem to be made of... There's such a charm to a world recreated, it's something a collection of data files just isn't.
This is fantastic. It is a real rust . How do you keep it from wearing off
You can seal it with a clear top coat, but it does lessen the subtlety of the rust effect somewhat, it makes it darker and less subtle.
This is a great tip! Those weathering kits are pretty expensive. I just left my steel wool outside in vinegar. I have an Amtrak locomotive that has a smear in the paint. Hiding it with a rust stain will be a perfect solution.
Cool, I hope it works perfectly for you. Good solution.
I finally got the rust, but just used water sparingly & ended up with a kind of powder which work great with wet brush..but I never have tried without this video so thank you sir!
I'm so glad it worked for you mate! Excellent news! Cheers, Dave
Hey, Dave, just wondering if you would recommend clear coating models after doing the rust weathering? Thanks, Mac
Depends how much its going to get handled, if you do clear coat it I'd advise Matte coat but fair warning, it will darken down the vibrate oranges
Moment you said how to make rust at home I was running to my kitchen and then down to basement preparing jar of steel wool, lol.
Before and after applying the rust, should I spray the model with anything to seal the surface? Thanks. Great video.
Hi Kent, you can seal it with a clear coat after you have applied it, not before. Be aware though that the rust will get darker, and lose some of its subtlety.
Just learning, great stuff, but what do you use for a top coat, or is it left as is, thanks
I never seal it in. You can if you want, but it will dull the subtlety of the effect and will also darken the colour of the rust.
hi, only mix the vinegar with the metal wool in the same bottle and wait?, how much time need to be ready?. Thx for this tip, u have a new sub.
Hi Antidoto35, yep, that's all you need to do. Mix vinegar and steel wool in one bottle, and leave it for maybe 2-3 days. A week would be better, but 2-3 days would give you a useable rust. Cheers, Dave
I have used rusty old metal from an exhaust pipe in the past. It gives you rust colour but without the texture bits. This method looks really good though.
Great tip!
Although 2 years ago but great tip. My question is can i spray seal on this? Coz im guessing these rust is not permanent over long period of time? Or can get removed when your cleaning the model from dusts for example.
Hi Peter, you can seal with with dullcoat but it will darken the rust, it looses a lot of its subtlety. Better to just leave it unsealed and be careful when cleaning.
Great economy tip Dave. I go a little cheaper, by useing worn out S.o.S pads. Once I have scrubbed the soap out cleaning something I put them in a container with water to dissolve what's left in a jar. Never used vinegar, but that works fast it seems. Loved the texture. My Titanic wreck model 1/ 700 will require a sea floor covered in rusty bits. I plan to blend the wet plaster with some pieces of rusty chuncks , letting the rivers of rust run to the low spots. Like the R.V. footage in the pictures. This is a perfect shmutz to spread all over the wreck! Thanx for sharing Dave.
Lance Caldwell that sounds amazing. I can’t wait to see your Titanic diorama. Will you replicate the water in any way? (Which sounds like a nightmare, btw!)
Excellent video! I actually have a jar of this sitting right here - I mix it up tho, for the liquid. If you paint actual wood (like popsickle sticks, matchsticks whatever) it chemically reacts with the wood and turns it dark in various shades, great for a worn look in dioramas etc. I'd not thought to use the solid left over bits as well! Definitely going to try it out. Thanks very much!
Interesting and very well detailed. Came across this when looking at rc scale crawler body painting and the channel linked this video as a recommendation. As water gets rid of it, I assume a form of lacquer on top (even cheap hairspray) will protect it a little from the elements when taking the rc trucks out into the wilderness through some watery splash conditions?
You would definitely want to seal it somehow for a RC truck that's going to be exposed to water, grit, etc. Hairspray is water soluble, it will eventually wear off. you'd be better with a matte clear coat of some kind, but be aware the clear coat will dull the effect a little, it will make the rust darker and it will lose some of it's subtlety.
Love the technique! Long ago I used to thin out flat/matte enamel paints to use as a fixative for clay dust "mud" and "bearing grease ooze" on AFVs. These days I am more fascinated by STEAMPUNK and your Steel Wool Rust is Perfect for that kind of Nitty Gritty... Once dried overnight, the rust could potentially be tinted and/or moved around with a fine brush, using the thinned enamal fixer I mentioned above. Your vids are Aces Dave.
WOW thanks for all these "make your own" its amazing i'm new at this (1year and 1/2) and i still make ugly effects with pigments i buy but after this video my scale models are so good. Huge thanks from me :)
Keep it up
Awesome. Love any money saving tips. How about burnt rust on exhaust?
I guess you could apply this rust effect, and then airbrush a burnt colour over the top of it?
I love this super cheap technique though I have a question. Will it come out the same when applied to any material Is (plastic, paper, metal, etc)?
Painted on to anything the result should be similar. I'd be hesitant about painting it onto paper, perhaps, purely as it is such a liquid it would soak in a lot, might distort the paper?
@@DavesModelWorkshop Yes that would be obvious, but the paper I'm using is a sticker paper but I assume it'll have the same result. Thanks a lot! I love a good penny pinch.
Hi! after the oxide effect is dry, which is put on the vehicle so that the effect does not come off? Thanks!!!
Try an acrylic matte varnish by vallejo.
@@Marauder623 would this also work for pigment as well?
Sorry if this has been asked already, but do you need to spray a fixer on the diy rust? If so, what do you use? Thanks in advance.
Hi John, you certainly can airbrush a matte clear coat to seal it in if you expect to be handling the finished model much. But it will make the rust darker, and you lose a lot of the subtler tones of rust. i never bother to.
Definitely a useful technique for that crunchy look.
Great video, I love the texture of the rust, would love to try it myself. Either with vinegar or water as another user suggested. One question has been on my mind, what material would you use to seal this in?
I would say most anything you would use to seal a finish on model. I prefer to paint my rust on using acrylics mixed with ground pastel.
If you wanted to keep the larger rust flakes would a couple mat clear coats protect them?
I’m thinking of going really heavily on a lexan RC crawler body...
Looks ace!
Was,wondering the same thing
Awesome! I have to try the steelwool. As for the pigments: How to fix them? Clear Code? PVA Glue?
I generally don’t fix them in place, I just try to not handle my models once the pigment is in place. If you do want to seal the pigment, I recommend any matte clear coat. But be aware it will darken the colour of the rust, and make it a bit less subtle.
I've found an acrylic craft paint that looks incredibly like rust. It's called Espresso and Latte which translated means coffee and milk. I use it on all my railroad wheels. Cheers from eastern TN
How did you apply it on your model?
Thank you in advance!!
WOW! That looks really great and so cheap too, well done Dave. I might just give this a try and see how I get on with it. Many thanks for sharing this top tip with us today.
Have fun,
Joe
Thanks Joe. You know me mate, I'm a cheapskate! If there's a non-expensive alternative, I'm interested ;) Cheers, Dave
Being 'cheap' means that one's creativity is set free...this is what separates one from the pack I would think. Splendid work Dave! Cheers from Roswell New Mexico.
Hi Dave if I wanted to do this to an RC car how can I protect it and stop it coming off when wet just lacquered I guess
Hi mate does this stuff rub off easy because I want to make a rusty vw golf and I'm worried it may rub off once touched. BTW great video mate
A quick question, if I may Dave. Should I leave the top of a jar loose/off to allow gases to vent, while doing this?
geggy5151 definitely leave the top off while the rust forms, it needs oxygen to rust. It’s more about letting air in than letting gases out.
Cheers Dave. Sorry for the tardy reply, I forgot to check back! Doh! I've 4 jars on the go. 2 with white vinger, (one jar 1/2 full the other full), one tap water and one rain water. The best so far, is the 1/2, full vinegar. Can't wait to try it!
Another beaut Dave. That's really clever. Best regards from England.
Cheers Norman!
Staff car looks bloody awesome Dave 👍🏻🇦🇺
Top tip! Cheers mate, I always like to do stuff as cheap as poss as don't show models but looks great to me.
Thanks Paul!
Thanks bro I been trying to use this style on a vw bug, how do you make it look with the bumper with the silver rust
If you're trying to show chrome with some rust flaking through, I would do it with rust coloured paint and some rust coloured pastels streaked underneath.
will you ever do brush painting weathering or chipping
Hi Reuben, definitely! It's on my Video To-Do List, I promise you! Cheers, Dave
Thanks so much... I tried your rust technique, and it works, saves my money too. Natural is power
Nice work buddy... Why don't you try about 100 copperhead Bbs and a copper colored sos pad in vinegar 🎉 it'll be rusty like RUSTY 🎉
Absolutely fantastic, Dave. Thank you so much for sharing this tip. Cheers,
tony
Give it a crack Tony, it's great stuff once you've made it.
I've got a jar in the yard now! LOL . Thanks again buddy! Great tip. I do wonder about how to seal it though...? Dullcote?
How do you seal it, so it no longer can be brushed off? Also, the other pigments. Do they need a varnish?
TerminatorFiles I don’t bother sealing it. You could spray a Matt varnish to seal it, but I find this makes the pigments darker and less subtle. I just try to not handle the finished model too much.
I did just as the video suggested and used steel wool and apple cider vinegar. It's been almost 2 weeks now and nothing. The steel wool still looks brand new.
I would suggest adding a little bleach and see if that kick starts the process. But please be mindful of fumes!
Interesting and effective , just out of curiosity,,, have you ever tried ordinary steel wool , I use it all the time , you can use it in strands ,bundles s per size required , chopped up and dusted, mixed with water based glue,, works a treat
whitestuff1959 are you using it for vegetation on dioramas? That sounds fascinating!
You can apply to anything, been doing a full upgrading on a Heng Long Tiger one and used steel wool on the metal tracks … just get the tracks fully covered in very fine steel wool and leave to rust up, the finish is great even if I say so myself .it is real rust ,on the hull I used very finely chopped up steel wool placed were I wanted rust and that did the job ,again real rust and it does not take that much longer to produce a result .You'll need to figure out application mediums (ie plain water, water based glue etc) for your particular needs/requirements and dependent on the subject but I found it works on die cast model cars ,even told friends of mine that build car dioramas and they love it , everything I tried its done the job so far. obviously if model is to get wet then use a medium to protect the rust finish . Have found its easier,,, by far than messing about with paints etc but in saying that I have also used these rust paints with the wool and the results are great. I all depends on the finish you want. Please have a go and let me know how you find this method
That sounds amazing! I'm definitely going to have a crack at that. So you just cut it up very, very finely? Is it almost powdered by the time you're finished cutting it? Fascinating!
you can use it as strands ,lumps , fine chopped , course chopped, it all depends on what application and /or finish you are looking for or just add water or tinned out water based glue. Don't forget there are different gauges of steel wool ,
do you laquer it after to seal it on
That looks great. Got a 1/10 scale 79 ford bronco RC that I want to weather
Did you clear coat the model before doing this. I pretty much exclusively use acrylic paints and am wondering if the liquid part would do to much damage to the paint
No, I didn’t clear coat first, but as long as your paint has dried properly I can’t see the rust liquid affecting it. Maybe try on an inconspicuous section first?
@@DavesModelWorkshop Thank you very much
I'm giving this a go. Would adding some bleach to the vinegar speed things up?
Hi
This is a great video. I decided to try and make rust myself, using the steel wool and vinegar method. But how long does it take? I put a roll of steel wool in a glas jar, covered it with vinegar, but until now I can not see anything has happened at all. Its only been a few days though, but how long time (approx) before I can use it?
Thank you. Mine took about a week. Some people have reported longer, some shorter, and a very few unlucky people haven’t had reactions at all, I guess it depends on the atmospheric conditions and/or the wire and vinegar used.
Wonderful weathering job Dave! looks so realsitic! i have 1 question... yesterday i tried making it my self and in the jar, i placed the steel wool and filled it with white vinegar but today i saw and happened nothing 🤣🤣 how much vinegar is required??? Love from Greece!!!!
I used about 150-200ml of vinegar in the jar you can see in this video. I basically put the steel wool in, and poured in as much vinegar as the jar would hold. i hope this helps.
@@DavesModelWorkshop thanks! I will try again.
wow cool......never seen rusting like this before....
This is brilliant! I will follow❤
Hii great idea!! thanks, How long does it take to obtain the rust from the moment you mix them?? Regards, Horacio
Does this rust have to be sealed to keep it from rubbing off? I love the realistic look, but is it for things that won't be handled a lot only? Thanks so much for sharing this!
Yes, you'd want to seal it if it's going to be handled regularly.
What's varnish do you recommend to fix this or other brand rust washes?
I never varnish mine, it dulls the effect and darkens the rust, so I can't comment sorry.
Hi, looks super! 👌. 2 questions, does the rust go on over your finished paint? And do you lacquer over the rust? Thanks.
Yes, the rust does go on top of the finished paint. And yes, you can add a clear coat over the rust if you wish to. I don't bother, I just try to not handle that part of the model and it stays on just fine. But if you are going to be handling it, add a clear coat - just be aware that it will darken the rust colours, and you will lose some of the subtlety of the rust. Cheers, Dave
@@DavesModelWorkshop thanks
These are such great videos .... on a budget and as an old beginner, thanks very much 👍
Thanks David. Glad you enjoy them. Cheers, Dave
@@DavesModelWorkshop... I’ve made my rust jar up and drying some earth out now...on my second build now.... bought a cheap airbrush and had great fun practicing and using on the first model and trying and making my own pin wash and other wash out of oil paints... all new techniques to me and from one of your commandments.... it might not be to any winning standard but to me who looked at models in the shop and thought I wish I could .... it brought satisfaction to me and will learn from the mistakes and have the confidence to try anything.... I might be sad but I actually don’t mind cleaning my airbrush 😊
Fantastic idea and presentation. I love it. Thank you.
Wonderful weathering jobs, looks so realsitic!
Hey Dave, do you varnish over that, or do you leave it as is?
I don't usually bother to seal it. If you are planning to handle the model you certainly can seal it with a matte clear coat of some kind, but be aware the clear coat will dull the effect a little, it will make the rust darker and it will lose some of it's subtlety.
Love it. Never seen this technique before. Will certainly give it a try. Thanks for the video.
Thanks mate. It's tremendously satisfying!
Can this process be clear coated?
Does this work with rc bodies? Will it come off if I hit a puddle or drive in some water?
Hard plastic to be specific
Pretty sure it will wash off with water, yeah... not ideal for RC.
I’ve also tried you dirt, mud, and flat earth mixture to get mud effects. And loved it but instead of flat earth I used burnt umber Acrylic paint and also liked the effect. Cheers fro Canada
Hi Craig, glad to be of help mate! Cheers from Australia.
It's winter here and it's pretty cold will it still be ok to Leave outside?
Should be Clem. As long as it doesn't freeze?
@@DavesModelWorkshop thanks 👍
Awesome! Do you seal it with anything afterwards to stop it coming off?
I don't, but you certainly could. It would probably darken the colour of the rust a little though. Cheers, Dave
I tend to find that if I create a really nice, subtle finish with pigments it will eventually come off over time . When you have an effect that you like a LIGHT spray off TS-80 clear cote from a distance of about 12" just keeps everything fixed and doesn't change the colour . But remember when it's fixed, it's fixed so make sure you are happy first.
Loving your stuff Dave , lots of inspiration thank you.
Thanks guys
Thanks Rob. Cheers mate :)
Wow ive been modeling for quite some time and i like how the first way to make real rust ! That blew my mind hahah ty very much
Glad you liked it Tim! Cheers, Dave
Works superb! Thanks Dave!
Great idea Dave. Thanks for the tip.
idk if i’m doing it right or worng but i been having the jar open for like 2 today and it’s still clear what else do i need to add
Excellent video Dave, thanks so much !
Greetings from The Philippines
Eric Rausch thanks Eric!
I'm wondering if you could strain or press out the liquid and then add in gum arabic to the liquid for a binder?
Is there any way to make it water proof? Wanted to use it for my rc truck
You could seal it with some sort of clear coat, but it dulls the effect and loses some of the subtlety.
@@DavesModelWorkshop Thank you
You can also use aluminum soda can that's been burnt with a torch, it makes very nice surface for heavily rusted-through parts
Hi Dave.
Hope all is well with you.
I thought I would try your diy rust, but it's been sitting for a week an nothing seems to be happening ??? I used steel wool did have some soap put in not it out of the box. But I washed out all soap dried then started the process. But as of yet I have had no changes no rust, but a funky smell as u said there would be. So it was outside for the first couple of days. Why is it not working vinegar, steel wool cleaned an dried. Start the process, NO reaction ??? Cheers Mate. Scott
Hi Scott, bugger, that must be annoying. What sort of proportion of vinegar to steel wool do you have?
Dave's Model Workshop
Hi Dave thanks for your reply I just got a small bottle of vitamins, an put 1 steel wool pad it was about 3" by 1 half inches, pulled it apart stuffed it in then filled it up with about 100 mls of vinegar. I have most likely put to much steel wool. Cheers Scott.
i tried this the steel wool somewhat rusted but the vinegar is orange will it still work if it is liquidy
It will, but it's much better as a "sludge" rather than a thin liquid. Maybe try to evaporate some in sunlight for a couple of days, see if it gets thicker?
will this work with steel wool with soap on it if you take all of the soap off?
Hobby Nerd I’m not quite sure. I guess you could soak it in hot water to remove the soap, but it would be hard to remove it all.
Do you seal the rust after to make it permanent? thanks for helping. My main interest is Gato submarine.
Hi Donald, I don't bother sealing it, but then I also don't tend to dust my models or play around with them once they are completed. Cheers, Dave
Could the final finish of all the effects be sealed for durability? If so what would be used? Please excuse as I am a complete beginner in this kind of painting jobs. Thanks.
You certainly could, definitely. I would use a matt clear coat, something like Tamiya TS80 spray lacquer, or any kind of matt varnish. The only potential down side would be it *might* make the rust tones a little darker -
do a test first and see. Hope the sub turns out great :)
Dave's Model Workshop ... the exact question i was going to ask!! Brilliant video by the way, thank you!!
Awesome video..........
Brilliant!!!! I'm doing this when I get home from work today!
Thanks TescoVee - let me know how it works out. Dave
This helped alot Dave!!
Do you just fix it with a matt varnish?
You certainly can airbrush a matte clear coat to seal it in if you expect to be handling the finished model much. But it will make the rust darker, and you lose a lot of the subtler tones of rust. I never bother to.
Massive thank you! This made weathing so easy!
Excellent!
can i use anything else to replace vinegar ? really dislike that smell of vinegar
Simple idea, brilliant & cheap! Will definitely try it.
Hi David, thanks very much. Simple and cheap is how I work ;) Cheers, Dave
Brilliant ,im away to my shed with my scourer and viniger,i think it will look good on tank exhaust s. better than the old bicarb of soda and glue technique ive been using
Good luck Kevin! Let me know how you get on mate. Dave