CHEAP EBAY K SWAP HARNESS ! Does It Work ??
Вставка
- Опубліковано 9 січ 2024
- Wanna Send some Cool stuff????
Dana Prum
P.O BOX 21304
San Jose, Ca 95151
Follow the media!
/ efnstatic
/ staticservice
/ danaefnut
Nomis Industries
/ nomisind
www.nomisind.com
ACTION CLUTCH 10% OFF DISCOUNT CODE : STATIC
actionclutch.com/
/ actionclutch
S1 BUILT Discount code "STATIC"
/ s1built
www.s1built.com/
/ @s1built
REDZONERACE
www.redzonerace.com/hawaii-tun...
/ redzonedb8
/ redzonerace
KELLYBUILT FABRICATION
kellybuiltfabrication.bigcart...
/ dsrxkellybuilt
CJSWIRING (RIP)
www.cjs-wiring.com/
/ c_zapien
MAXPEEDINGRODS DISCOUNT CODE : YSTATIC
www.maxpeedingrods.com/?track...
/ maxpeedingrods
KONIG WHEELS USA
/ konigwheelsusa
konigwheels.com/
STREET2TRACK
www.street2track.net/
BRFITTINGS
www.brfittings.com/
/ brfittings
Y&S Lexan
/ y_s_lexan - Авто та транспорт
I just swapped this ebay harness onto my kswap integra an it would no longer start. Watched your video and decided to give it a try without ohming anything out, swapped the wires now car starts again! thank you for the information
Sorry to here about your friend Carlos, I didn’t know him but I remember way back when he first started I found his company and product on instagram yeaaaars ago. Again I’m sorry for his loss and may he rest in peace.
I got one of those impossibly cheap harnesses and spent an hour testing it and seemed ok. I plan to reloom some of it for my setup anyway. But even if you needed to repin it, as long as the wires go to the right plug you are good to go.
I’ve been trying to start my Krx for over a year because of this thank you for the knowledge 🤝
Thanks for always being an inspiration Dana!
Running same harness over a year now works fine.
Can you post a link for the exact harness I ordered one didn't work out was having map issues
Thats exactly what happened with my harness when I got it. I dug around when I installed it and theres some forum post out there that shows this fix too
The grind definitely never stops.
nothing but respect for YS man, he just keeps going. dedicated Civic guy
This made me want to fix up my EJ.. still need them fork spacers 😂
Excellent work thank you for all your input.
🏎️civic🇵🇷
Everybody that watches Danas video should at least tell like five friends about Dana's channel on UA-cam............, to me his content is filled with valuable information about imports, and a lot of valuable problem-solving,with Hondas,160,000, is way too low for content this good........., so let's everybody helped Dana out with his channel and everybody at least tell five of their friends, thank you............
Love your content man keep up the good work
really good idea to test the pin outs to the plugs for sure ill look into doing with a ebay harness foy my dseries
For $70 they must be using slave labor lol. Or at least making them hundreds at a time assembly line style. So much highly skilled work goes into making a harness. RIP to the homie! You've been using his harnesses for as long as I've been watching your channel. Can't believe it😢
Can’t believe Carlos is gone😔 his work was top notch 💪🏼
Thank you Sir👍
Curious if this works, cuz I'm using a CJs conversation harness with the same eBay harness. RIP Carlos, that is sad. He makes a great product and was very helpful.
very very helpful video thanks man..
Thanks!
Ordered a $85 eBay B series harness for my 89 Si build🤷🏼♂️ she started up no issues no CEL, and drives fine 💪🏻💯
Do you have a link to which one you bought? I'm having electrical problems with the stock 1991 Si EF harness and a B16a swap
@@classicgears3136 yeah wondering the same thing my b18's harness has seen better days
@@randomstuff159 put both links here
Yeah, I could use a link to that harness. I have an OBD1 GSR and P72 in my 94 hatch.
@@classicgears3136 won’t let me post link intired it keeps disappearing for some reason 😒
Nice. Sold the smurf. Good job bro.
Shout out from PH 🇵🇭 Dana!
Holy crap. Good video and info.
I have the Jack Spania in my k20a em1 with kprov4 prb, runs perfectly. I had to repin a few connectors like the front facing vss but that’s was it. Using the ktuned conversion harness and I have full dash working and no cels. Speedo is dead on too using the kpro to adjust. I also run my afr from an aem 30-0300 wired into analog1 on the kpro. Just make the correct adjustments in k manager.
what wires did you end up using to get your speedo to work, I have a K20 harness obviously and the speed sensor on the front of the transmission as well and for the life of me I can't figure out the speedo situation
I got the spania harness for my 20/24 works great but can't figure out my Speedo running a css speed sensor
Great Work
Bro bro🙌👏🙌🤝🙏clear as water..my car turns on now
I ordered a jackspania harness recently and I couldn’t get spark for nothing. Went ahead and bought the charge harness for my rsx engine harness and it fired right up
Next thing on my list for my da for tuck harness
rest easy cj. we love you.
A legend 🙏🏽😔
how's the quality of the plastic used for the connectors, are they gonna last 10 years or they will break appart in a couple years ?
Great video, I want the link to that multimeter.
The amount of knowledge this man possesses… I’m jealous lol
Wish there was more detail on the ebay harness. I.E how u ran the harness n your struggles.
Can u show the b series tps n map wiring n diagram?
Pretty please...with sugar on top....
Great build man! Binged the Blueberry build series for a while. I found your channel because I was trying to find out if my new turbo setup was working fine or not. I ended up with a GT3582 from Maxpeedingrods because I'm a pobre $😢😅, anywho I just finished installing it on my Toyota Chaser. It's twice the size as the stock turbo so I know I should expect lag but I was wondering what yours was spooling at, mine spools at 4K RPM and it's insane after that but I was hoping to get spool at 3K RPM or 3500 at most. Does that sound about right to you? I know a 1jz and K24 ain't the same but I was just curious what yours was spooling at. I'm working on my videos right now so hopefully I get at least a part one out soon. Anywho, love your content, cheers bro 🤙🏽.
I have used them several times and works great for me I got a k24a turbo
You got a link to the harness you used bro ? running the same motor
Yeah plz share the link
@@jordyreyes8193did you ever get a eBay engine harness
Need a steering knuckle for 9th gen civic. Does your salvage yard have any there's nothing where I'm at.
ahhh we were trying to help a friend who ran one of these and we could not figure out why it didn't start, I would have never checked that also
Keep it going
Is there no way to upgrade the shifter without losing the stock look, imo the stock shift boot and console look better than the big racing look
I used that one on my k24 del sol
Damn. RIP Chris
The best thing about those things is someone else did the job already therfore that labor time is saved if you think about it..if it has punch work oh well flip the wires to make it the final product
So the k swap conversion harness isn’t same as one in video ? Confused new to this
It's tragic to hear about Carlos. I was a fan of his work. I had yet to see about his passing. He was a big part of the "EF" community. I had a question for you. I have a 91 Wagon. I am about to do a Y8 swap and want to tuck the bay some. Do you have any videos about moving the proportioning valve to its location show in the end of your video? I have a K20A2 that I want to swap into it long term.
🔥. Nice
Will harness work work with k20z3? For eg
K24a in a eg with this China made harness .
I have a k20 crank sensor on the k24 but I got three crank sensor codes .
Do I still need to swap wires even though I have a k20 crank sensor ?
So I bought a similar harness and I'm having issues figuring out the 2 VTEC connectors. I'm missing the one that's towards the rear of the solenoid. Any suggestions? Maybe a different harness but they all look to have the same connectors?
R.I.P. CJ
Could I use that cheap harness, an immobilizer bypass and compatible ecu to run this engine on a stand?
Why did you those 2 b series sensors
Even I knew he was turning the wrong way 😂
Damnnnn, RyWire is a name I haven't heard for a very very long time!
You should sign every car you build !!!
Ever try Jack Spania racing? So far everything I've had from them has been good.
Long live CJ 🙏🏽🩶
Noooo not CJ 😢 dam im at disbleif my he rest in peace ❤
I tried the eBay wire harness With hybrid, racing, chassis harness I switch the radiator wire, just like you did, but I was still having issues when I tried to plug in the factory wideband, as long as it was unplug, the car seem somewhat normal but with it plugged up my idle start going crazy. I plugged up aftermarket wideband to battery Everything was good as soon as I tried to wire LC2 wideband in to Harness into auxiliary 1. The wideband LC 2 no longer works. Not saying there was some mistakes made if you want to get an ideal just let me know zoom call you.
🎉
Yo you want to buy a sleeved boosted 92 prelude?
Rip cjs. 🙏🇳🇱
Yessir, R.I.P Carlos.
Let's goo!!!
Can you post the link to that engine harness 😢 Static plz.
Send link to harness you bought bro would appreciate it
Ghost in the background😮
Can I get the link to the ebay engineer harness?
Could you please link the harness !!!
I've been super curious about these Ebay harnesses. I was considering one for my GSR since they are like 1/4 the price of other ones. Ty for the video
I got one for my swap, works great
@@Ontheregz Nice! Is it the OBD1 or 2 one? I'm looking to maybe get a OBD1 GSR one
@@curtisbeefmine is obd2… k swapped em1. I think they should have obd1 tuck harnesses too.
@@curtisbeefor you could use obd2 and a conversion harness to go to obd1. That’s what I had to do with the obd2 si b16a2 and Hondata s300, that have to use obd1 to work.
I need a harness for my 98 civic ex to swap a B18b1.
Always wen I search I only get results for OBD2 to OBD1 or OBD1 to OBD2 but not OBD 2 to OBD2.
I want to keep this car good for CARB referee.
any part numbers for D TO B OBD2 TO OBD2 harness?
Thanks
I have a 97 civic sedan b20 swap I’m also having trouble looking for one of these cheap harnesses. Have you had any luck
Link on the harness?
Rip cjs wiring🙏🏼🕊️
Whats the paint code on the sedan? B37M? Florence blue metallic? Or different? I gotta sedan in that color that needs painted but i dont see them in the darker blue much
Your's looks more like b56m Saxony blue metallic. Mine is a 89 sedan and it's definitely darker I think.
RIP CJ didn’t know he passed.
ebay link please
Can you post the link ?
Fareal
Glad to see he is using this I bought one off Amazon looks identical to his lmao no issues at all.
@@daddys_slow5ohcan you send me a link
Link, please!!
Yeah link please 😢
Rip😢❤
Interesting 🤨
cut awaaaaaaay from yourself, not towards yourself 😎
So you don’t have Project blueberry anymore dang
Bone Thugz N Harmony🎉🎉🎉
All those cheap engine harnesses always make me ask, "Does it work? Yeah? But for how long?" I've always been scared they'll stop working after a few months
Rip CJ........ and so long Blueberry😢
I have a brand new Cj wiring K conversion for the ef. Lmk mane
I also have brand new Cj wiring ground kit
Bye Bye Blueberry!😢
Damnit man, I didn’t know CJ died.
Kinda sad to see Blue Berry gone
Honestly its luck of the DRAW on those CHEAP eBay china harnesses. Bought one months ago and compared it with my friend's known working harness on the ECU plug/pin side and WASN'T even CLOSE! Tried it ANYWAY and couldn't get it to RUN!!! Im NOT rich so went with a Jackspania Racing harness because MANY UA-camr Honda guys had EXCELLENT success OUT of the BOX with those harnesses. Cant afford REWIRE or Ktuned. SO........
Any issues with the jack harness I'm not getting nothing on my two middle cylinders on my 20/24 using a k pro v4 looking for help idles fine and hits VTEC just no middle cylinders and when I drive it I get code p0005 car is severely down on power
@@DustyLouis-le8kj . Sorry for LATE reply. Yeah it works FLAWLESSLY. Except for weak baseMAP for Vtec killer setup running on Kpro 4. . Been a battle. Highly recommend harness though
Still waiting for a k swapped 2003 sentra
Not gonna lie, after dealing with first gen spec vs, & ecus i might just try it lol
Waiting for a complete k swapped 1988 sentra, my current dream combo
I dream of wires (1981)
😜👍🇦🇺
When I do work like this it never runs again🤦
Cut away from yourself not towards yourself 😮
Bought the jack spania b series tucked harness had all kinds of problems with it alternator rpms etc. On top of that they wouldn't respond or return it so avoid this harness if you can and the problem with jack spania not taking care of their customers bad business big facts
I got his k swap tucked and it’s great, no problems and he sent me a charge harness 🤷🏻♂️
All of that shit is rebranded eBay shit.
Omg he died!?
May CJ rest in peace 🥹 such a warrior 🫡 and a good person whom should’ve had a longer life 🥹
Just not worth frying your ecu on that Egay harness. Had many swaps come over with them and never work. Either have to re pin or just buy an oem harness
I'm using the same harness on a Da lsv I hope everything goes ok 👍 thanks for that inf also I change words with you on IG about the bull boost head 🔩 and I'm gonna sent it but I can find the torque specs do I used oem specs or arp ?
Is it just me or is their allot of young people dying lately. RIP Carlos.
Goodbye blueberry 🫐 ! It was cool while you were around !