The one UA-camr that deserves a garage with a lift if Dana. Man has done extraordinarily things in that driveway. Been following since the EF sedan rostolium paint job.. good old days 🤟🏽
We should all start tagging Dana's page every time a big time youtuber that used to hate on Hondas uploads a "today we turbo a civic!!!" Video. They're just chasing the sudden popularity. Meanwhile, Dana is an OG that has deserved a WAYYYYY bigger following.
If you or you know someone who's in a dead spot with a project, recommend this man. Go, go, baby steps, go go go. A little progress is better than none. Mad respect!
Dang bro!!! I’ve got the exact same set up but a ep3 type r k20a and box too(lsd) did my mounts last weekend and slowing getting there weekend by weekend. Amazed at your knowledge and how fast you can get it done by your self!! Legit inspiring me with this blueberry build. Wish you had done a mount episode like 1-2 weeks ago your explanation and detailed lay out of bolts and what goes where is no where to be found on UA-cam. Keep it up my man m. Love from Australia. Plus them oem headers is awesome!! You have some crazy skills!! Again keep up these sweet uploads funny cause we’re at the same stage in the build it’s taken you a month or so and it’s taken me almost 2 yrs
The gearbox top bolt is threaded as some imperial thread. I took mine to my local bolt place and they supplied the right bolt. So weird they keep doing it on all the copy ones. I also switched over my bushings on my ebay ones for hasport 62a ones and they are so much more compliant. As you say for $120 how could you go wrong!
Hahaha, I just watched a video from Hasport where they are doing a K into a eg. They said to leave the rear mount loose until the engine is in. You, at 6:50, "Hnnnnnn! That's tight!" :)
currently installing this same kit. It has the same issue where the rear bracket has the wrong thread. Kinda weird lol. Like some designer wasn't paying attention and set it off for a production run of who knows how many. not bad for the price, actually the mounts themselves look nice. Got to cut up and weld my rear bracket, didn't know beforehand that the later model transmission don't have mounting bosses at the diff. Otherwise it all bolts up. Funny thing about the kit is some bolts are labled 8.8 grade, and some have no markings, aka no grade. Let's assume, the bolts could break. Honestly, got to shout out to Hasport on this kit. The kit is CLEARLY a Hasport knockoff. Pretty much exactly the same minus some quality.
Dude that thing looks gooooooooodddddd! I have a 94 Del Sol I'd love to K swap one day. Right now it's my daily and when my oldest step son gets his license in a month or so it's gonna be his.
Dana, look into 18650 batteries for those flashlights. I uses a 4-channel battery charger and keep alot of batteries charged and rotate them out as needed.
I forgot all the washers 😂 Shoot lmao Really enjoying the content on this car because I have a dc and want to k it. Those mounts are not bad for the price
Hey bro! I just bought the same mounts and I am wondering did you have to clearance the hood at all? It’s a k24a2 with a z3 head and my hood is hitting the brake booster nipple on the intake manifold. It’s a RBC mani also! The chassis is a 93 eh3
This will probably be lost in the comments. I bought these same mounts for my Del Sol and am having hood clearance issues with the valve cover. How did you get your hood to close?
Having these mounts. How much does it change every day driving. Does it shake crazy on idle? I’ve always wondered no one talks about it so is why I haven’t done it to any of my cars.
I think that bolt that got stripped slightly, you're probably supposed to use the honda OEM one... Did you try that? Bit too late now haha Love the work 😎
Wazzzup man...good job...engine "is" cherry...Ebay mounts...you'll know this summer lol, otherwise, why not! Looking forward to the finished product...keep turning that wrench...one love
Not sure why people complain about zipping away with impact driver, as that is what they do at dealerships, besides loose restraining clips, and scratching stuff.
Hate to break it to you, most OEM motor mount bolts are only grade 5. They are designed to fail for front end collisions. I know you're going to argue about it, but look it up. Some cars also only use grade 2 or 3 bolts for their motor mounts. I've been in automotive parts side for the last 8 years.
The one UA-camr that deserves a garage with a lift if Dana. Man has done extraordinarily things in that driveway. Been following since the EF sedan rostolium paint job.. good old days 🤟🏽
Facts!
The guys that really put in work and grind seem to just make do while the dudes that just show off pretty much have all of it
Couldn't have said it better, FACTS💪
We should all start tagging Dana's page every time a big time youtuber that used to hate on Hondas uploads a "today we turbo a civic!!!" Video. They're just chasing the sudden popularity. Meanwhile, Dana is an OG that has deserved a WAYYYYY bigger following.
If you or you know someone who's in a dead spot with a project, recommend this man. Go, go, baby steps, go go go. A little progress is better than none. Mad respect!
You make it look so easy! Love the content bro it makes me happy seeing blueberry with the 24 in it
This is what you call allot of progress. Good job sir.
you changed my life Dana. I've picked up myself a K swap and starting on an civic coupe project! Stay wrenching!
Love this channel, much love for a couple of years now
Enjoying how you do everything by yourself ❤
Engine looks great in there man. Love the budget thinking. You dont have to spend big bucks to put a decent setup together
The Ismsua mounts are my favorite clearance from oil pan to floor !
I can't wait to see future videos. Loving the progress your motivating me to work on my integra
Dang bro!!! I’ve got the exact same set up but a ep3 type r k20a and box too(lsd) did my mounts last weekend and slowing getting there weekend by weekend. Amazed at your knowledge and how fast you can get it done by your self!! Legit inspiring me with this blueberry build. Wish you had done a mount episode like 1-2 weeks ago your explanation and detailed lay out of bolts and what goes where is no where to be found on UA-cam. Keep it up my man m. Love from Australia. Plus them oem headers is awesome!! You have some crazy skills!! Again keep up these sweet uploads funny cause we’re at the same stage in the build it’s taken you a month or so and it’s taken me almost 2 yrs
project blue berry is looking great Dana!
Looking sick!! Love the all the info you put into the commentary and the jokes!! Keep it up. Always looking forward to your videos!
deff curious how the mounts hold up
Super stocked!! I'm motivated to work on my car this weekend 🤙👌
The gearbox top bolt is threaded as some imperial thread. I took mine to my local bolt place and they supplied the right bolt. So weird they keep doing it on all the copy ones. I also switched over my bushings on my ebay ones for hasport 62a ones and they are so much more compliant. As you say for $120 how could you go wrong!
You straight up put an engine in by yourself 🔥
Man we love ALL the content..keep it goin bro..I always look forward to watching your videos..thanks brotha
Suppose to drill out the spot welds on that bottom bracket on the frame rail. To fit the motor bracket properly
Hell yeah bro huge progress!! Looking forward to the first fire up. Keep at it!
Engine looks very nice on blueberry bro keep up the work u do...progress is beta than no progress
Can't wait to hear that baby start up. 🔥
Hahaha, I just watched a video from Hasport where they are doing a K into a eg. They said to leave the rear mount loose until the engine is in. You, at 6:50, "Hnnnnnn! That's tight!" :)
Keep it up man love the videos and always have! I hope all is well! Positive vibes always
Love coming home to a new video!
Awesome! Progress is going quick!🤙🏽
Blueberry is looking good Dana !!! Sweet build mate !!! 😜👍🇦🇺
currently installing this same kit. It has the same issue where the rear bracket has the wrong thread. Kinda weird lol. Like some designer wasn't paying attention and set it off for a production run of who knows how many. not bad for the price, actually the mounts themselves look nice. Got to cut up and weld my rear bracket, didn't know beforehand that the later model transmission don't have mounting bosses at the diff. Otherwise it all bolts up. Funny thing about the kit is some bolts are labled 8.8 grade, and some have no markings, aka no grade. Let's assume, the bolts could break. Honestly, got to shout out to Hasport on this kit. The kit is CLEARLY a Hasport knockoff. Pretty much exactly the same minus some quality.
Looks awesome , question here , should I buy the sp1 or sp2 coilovers from maxpeeding rods , or should I buy a more expensive set of coilovers ?
Save more to with a good set
Check out riaction coilovers just incase..but it doesn't hurt to try out the max speeding rod ones
Yee! About time you put that cherry on top
Loving the videos, keep up the awesome work.🇺🇲🇯🇵
Caught your CRX in socal, looks awesome! Im very excited to see project Blueberry, youve been crushing it on it!
Dude that thing looks gooooooooodddddd! I have a 94 Del Sol I'd love to K swap one day. Right now it's my daily and when my oldest step son gets his license in a month or so it's gonna be his.
Love the blue berry videos bro so motivating to build my own k24 eg
I learn so much from your vids brotha!
Dana, look into 18650 batteries for those flashlights. I uses a 4-channel battery charger and keep alot of batteries charged and rotate them out as needed.
Do they just fit in without any work?
ua-cam.com/video/u-iUjXrrfyE/v-deo.html
Easy swap out, see the UA-cam video I posted, there are tons of different 18650 batteries and chargers to choose from.
Do a blue sharpie to cover up the scratches or a paint marker
How’s the mounts holding up? I have some and the motor moves like crazy. Bout to upgrade to hasport.
It looking like a blue berry Kswap. Great work!
Watching your eg hatch build is making me want to build one so bad 😢
Pretty sure when we did my kswap eg it was common practice to step drill the top holes and weld two crush tubes into that rail 🤷
13:1 into this video, while installing the engine, you removed the subframe brace.. did you reinstall it? Or running it without it. Thanks
I forgot all the washers 😂
Shoot lmao
Really enjoying the content on this car because I have a dc and want to k it.
Those mounts are not bad for the price
Looks good dana. The red valve cover and the bleu. 👌🏻🇳🇱
Really im so happy for see this video and thanks alot
Guess what, did you know the ek k swap right hand frame bracket and the eg k swap LH trans bracket work in an Ek L15b7 swap with a stock subframe lol
Just make sure you don’t forget your washers!
This is an eBay kit? Looks pretty well made
Hey bro! I just bought the same mounts and I am wondering did you have to clearance the hood at all? It’s a k24a2 with a z3 head and my hood is hitting the brake booster nipple on the intake manifold. It’s a RBC mani also! The chassis is a 93 eh3
hey there how the mounts feel and are they any good? debating if going with this or spend alot more and go hassport
Love to hear the sounds bro don't stop 💯
This will probably be lost in the comments. I bought these same mounts for my Del Sol and am having hood clearance issues with the valve cover. How did you get your hood to close?
Great work dana.
Hey how is the mount stiffness, does this kit vibrate the dash
dude, I enjoy whay you doin but 1 advice I wanna give for the next dudes swapping K into Civics - start mounting from rear transmission bracket
Do the base model rsx axels fit in eg coupe without modifications??
Having these mounts. How much does it change every day driving. Does it shake crazy on idle? I’ve always wondered no one talks about it so is why I haven’t done it to any of my cars.
Can you use the stock axles for the rsx base on a ek chassis with the k24 swap? I saw you mention it towards the end
Will these mounts work with an accord trans?
I think that bolt that got stripped slightly, you're probably supposed to use the honda OEM one... Did you try that? Bit too late now haha
Love the work 😎
How do the eBay mounts hold up? I got hasport mounts for my EG and still running 3 years strong
Got a 96 integra and got bent control arm n tie rod I can use the same as civics no
Quick general question I have an 04 accord, will the jdm k24 ebb 3 run with my American ecu decently?
How much do you shorten runners on exhaust manifold? I gonna swap k24 in mb6 civic and like to use oem manifold . Thanks
As long as they work my boy!
When are you going to work on the giveaway crx?
Wazzzup man...good job...engine "is" cherry...Ebay mounts...you'll know this summer lol, otherwise, why not! Looking forward to the finished product...keep turning that wrench...one love
whats the name of the track of end of ur vidz lol oh yea love ur vids u the man
you make it look so easy i think ill pull my engine,,o hang on i forgot i was useless😂
I have a k24 from an integra 08, can i use the same motor mounts
I’m here for it 🤘
Sheeesh looking good as always
Not sure why people complain about zipping away with impact driver, as that is what they do at dealerships, besides loose restraining clips, and scratching stuff.
hella cool dude looks great
What is his song called
Yee
Super nice job STH hot wheels 🔥
The 1000NM Grunt torque 😁
Love the progress
Budget build !!😂
Nice one💪💯
👍
Lets go dude!
Order batteries and charger these 18650... $20 for 4 batts and charger
Came out dope
Looking good
The k looks like it belongs there,damn that thing is sexy dana
moral of the story: don’t forget your washers!!
Let's goo!!!
Man this is great 🤙🏽
Can’t wait for future vids on #projectblueberry
Just noticed the Colombian pinky nail. ;p
If only the giveaway car was going this fast
Fits the budget? Do you mean as cheap as possible. I try to do things right the first time, for example, not use grade 5 hardware.
Hate to break it to you, most OEM motor mount bolts are only grade 5. They are designed to fail for front end collisions. I know you're going to argue about it, but look it up. Some cars also only use grade 2 or 3 bolts for their motor mounts. I've been in automotive parts side for the last 8 years.
All That For 100 Bucks 🏁🙂🏁
Lookn sharp
DONT FORGET THE WASHERS!!
Hahah I would of tooking a day off seeing I had to drill a bigger hole lmao!!!
Why are washers important?
Security
Go dana
Love you vid 🤙🤙🤙