How to Use an Inverter/Charger Remote Control on a Boat
Вставка
- Опубліковано 21 чер 2017
- Why to install a charger remote control on your boat. What information does a remote control give you? Charger only mode, Off, or Inverter On.
Sign up for the PYS Newsletter: confirmsubscription.com/h/r/2...
Jeff Cote is a systems design expert and owner of Pacific Yacht Systems, a full service shop delivering marine electrical and navigation solutions for recreational boats. Visit the PYS website and blog for info and articles on marine electrical systems, projects and testimonials.
Website: www.pysystems.ca
Facebook: / pacificyachtsystems
Instagram: / pacificyachtsystems
Twitter: / pysystems - Авто та транспорт
Yet ANOTHER outstanding video- so helpful!!!
Glad it was helpful!
You've provided so many excellent videos. You've instilled the drive to always question as we go along on our refit and to "Do it Right". Is there any future plans on a possible troubleshooting tutorial and how show some techniques on how to be safe and also track down the origin of the problems presented? Again, my wife and I have really enjoyed your series and recommendations for best practices.
Thank you for watching our videos and yes, that is a great idea. Did you have any trouble-shooting situations you would like answered?
on the "off" will the power passthrough function still work?
Great video as always
I have very similar system looking to ass a Cerbo and Gx display will that make this unit redundant?
Thx
Not sure about your question, can you please rephrase?
Very helpful. Thanks. what setting should the actual inverter charger be put to and left at to use this remote or does it not matter (ie does the remote bypass the switch on the actual inverter body?) Thanks for all your info
Good question, leave the Victron Multiplus inverter/charger toggle button in the middle (i.e. no selection) to properly use the remote.
@@PacificYachtSystems so on the "off" position? (It's a rocker switch on my Multiplus with the same three choices as on the remote) and a toggle switch on the remote
why my led cntrol pnel blinking only
If the shore power can deliver 16A/ at 230V I assume I still can put the dial to 12V/50A on the Multiplus since the available power is higher than the power consumed by the Multiplus charger? The only way to consume more than the available power would be if the usage in terms of current at 12V would be greater than 307A.
Doyodanne, which dial on the multiplus allows you to select 50A? Was under the impression, that the Multiplus dial on the remote is for AC shore power amp setting?
How would you setup the inverter charger to connect this remote? Switch? Jumpers? Please
Show the inverter side of this setup. Thanks Ray
Hi Ray, this victron remote is connected to the victron inverter/charger with a data cable, plugs in at both ends.
Isn’t there some jumper wire that is supposed to be connected also? This is what I want to confirm. Which configuration? Thanks