Hard grease packed in the hole, a semi snug shaft & a hammer will work pretty efficiently. Works great on pilot shaft bushings too as long as there’s no hole behind what ever your working on the hydraulic pressure gets it done.
A brilliant plan! Being a very practical and mechanical minded person, I can totally say "brilliant". Use larger rollbolts for larger bearings! Gonna make myself a set a.s.a.p! Thanks a million!
Este video equivale al 1% de todos los vídeos de youtube donde 99% son sólo entretenimiento y 1% que realmente te deja 100% satisfecho. Practico Sencillo y ÚTIL MUY ÚTIL.
The Bolt is called a CONCRETE ANCHOR WAGE. I used a grinder to cut a slit so I can use a screwdriver to hold it while it tightened around the bearing. No welding needed
A lot of work for a one-purpose tool. It isn't adjustable so it only work for a limited range of bearings. I'd rather just buy an adjustable tool that works for several sizes, but UA-cam loves to recommend these homegrown DIYers.
That's an excellent idea. Well done. Might be better if you got someone else to weld stuff for you though, or work on improving your own welding skills so there are no accidents/injuries. Really good tool though.
A hammer, a bolt bin, and a loaf of bread will allow you to push out any blind hole bearing of practically any size without all the welding and fixture making for one size of bearing. I've been in industrial maintenance and service work for over 35 years, and I typically look for the easiest and best way to do a job - not the most complicated one.
I just made an adapter for the threaded end and attached a simple slide hammer worked fine. However for really stuck bearings may have problems with my method?
Hard grease packed in the hole, a semi snug shaft & a hammer will work pretty efficiently. Works great on pilot shaft bushings too as long as there’s no hole behind what ever your working on the hydraulic pressure gets it done.
A brilliant plan! Being a very practical and mechanical minded person, I can totally say "brilliant". Use larger rollbolts for larger bearings! Gonna make myself a set a.s.a.p! Thanks a million!
Been searching for diy bearing puller. So far this is the best
What's the part called that actually sets into the bearing?
Wow simply amazing, you are very creative
Water pump impeller bearing. i have done this with a ratchet, nut bolt, pipe and a adjustable wrench
Este video equivale al 1% de todos los vídeos de youtube donde 99% son sólo entretenimiento y 1% que realmente te deja 100% satisfecho.
Practico
Sencillo y
ÚTIL MUY ÚTIL.
Brilliant idea veru useful tool you made....by this we can efficiently pull the bearings...
I like this one. But what if you need to pull a bigger bearing? Make another tool?
Yes, but I would make the side wings adjustable for different sized bearings.
The Bolt is called a CONCRETE ANCHOR WAGE.
I used a grinder to cut a slit so I can use a screwdriver to hold it while it tightened around the bearing. No welding needed
Very nice information video bro
Excellent combination of idea & skill thanks for uploading this video
It is a very good idea but not homemade.
Very simple, but only you hade the idea! Congratulachion and thank you!
Очень классно!!! Спасибо Большое Вам за идею!!!😊👍
That works pretty good for that size bearing. But it doesn't look universal for larger bearings. JMHO
Great idea! Good job man 👍
A lot of work for a one-purpose tool. It isn't adjustable so it only work for a limited range of bearings. I'd rather just buy an adjustable tool that works for several sizes, but UA-cam loves to recommend these homegrown DIYers.
1 great idea
2 some bearings need more strenght to be extract but I like the idea
3 really learn how to weld !!!!!
वाह भाई वाह क्या आईटम बनाया है
thank alot Ur teaching to me❤❤❤
That's an excellent idea. Well done. Might be better if you got someone else to weld stuff for you though, or work on improving your own welding skills so there are no accidents/injuries. Really good tool though.
The tool is very good but the back ground music is irritating
At last a brilliant home made tool well done
You are a smart man! A real diy genius.
Yeah its cheaper to buy a proper bearing puller than a welding machine.
A hammer, a bolt bin, and a loaf of bread will allow you to push out any blind hole bearing of practically any size without all the welding and fixture making for one size of bearing.
I've been in industrial maintenance and service work for over 35 years, and I typically look for the easiest and best way to do a job - not the most complicated one.
Best simple and effective idea To remove bearings!!!!!!!!! I’m building one thank you for sharing.!!!
Is the music by makoto? Great tool idea!!
ரொம்ப அருமையான ஐடியா.நன்றி சகோ.
Only one size of bearing can be remove due to restriction of adaptor.
Nice but there is a chance the outer race may stay lodged in and the inner comes out.
Behot dhanyavad bhaisaab! Excellent idea!
Not much of a welder but good idea except won't work on bigger bearings.
That's a great idea, now I can make me a bearing puller. Thx you .
Ide yg keren, berarti harus nyiapin byk tuh
Great bro
Nice idea. Super.
that's a really great idea! great vedeo mate is very good for use in some hard places!! cheers from Norway
Hi, respect for your ideas a work, the arc striking is incredible. Which welder and type of electrode you use? Thank you
Very good idea and use of a concrete ancore I will make one
superb idea hatsoff to you mr.
Exeleent video, I am going to make one, never thought of using that for the center good for blind bearing caps
Good....
Good idea !
👍👍👍👍👍👍👍
BRILLANTE MUY BUEN VIDEO GRACIAS Mr.
Every bearing in shop is pulled,, nice idea I wish I had more time to invent tools,maybe someday
Wow super
Awesome tool 👍
Excelente idea amigo Deswal saludes desde Canada/From Canada Hello Mr Deswal, excellent Idea
Appreciate your efforts,
Please make a video for how to remove bearing, fited in shaft ?
👉👍👍👍👈
I just made an adapter for the threaded end and attached a simple slide hammer worked fine. However for really stuck bearings may have problems with my method?
Great idea
Very 💕👍👏 sir ji
Подарите человеку инструмент! Он так мучается!!!
good my boss
Kya khoob banaya hai, jabardast
a very blessed human being !
Brilliant videos !. Subbed 👍
molto bravo. Congraciulation.
What is that first piece with "M10 ILTOP" that gets inserted into the bearing? Where to get one of those (in my case 12mm bearing hole)?
Please make a video showing how to make a homemade MIG welder.
VERY good 👌👍
Great job but some on request please please don't fiil musc in video
Ok next time
Music sounds like gran turismo.3
brilliant idea , love your channel
Interesting. Welding skills could be improved.
Excellent tool!
Excellent idea
Great idea with an anchor bolt!
The idea is OK, but the welding...AAARGH!
I like the wrench
Super junius👍🤝🤝🤝🇮🇩
very nice i like
Nice 🔥
Prosty i skuteczny ściągacz😀
Love watching arc welding without a lens
Ottimo.. Bravo
Very very nice
What kind of things that used, please tell me
गुड
👌🎬🎬nice video
nice 1,i like it
Good ideia! Congratular íons!
Excelente bien 👍
Very good
¡WONDERFULL!!!.THANK YOU.FROM CUBA
Brilliant idea.
Ingenious idea thanks for sharing
Very good job
V nic sir ji
Muy buena herramienta que materiales ocupare amigo
Bravo Turkey İzmir den selâm
Impressive
You are great
Top você é o cara ótimo projeto
C est une tres bonne idee bravo
Can I ask, with the greatest respect. Why you don't learn to weld properly? Good idea though.
Very nice