My dad used to have one decades ago and taught me how to use it to thread galvanized pipe. It was rough and tough work to thread a pipe, but it taught me valuable skills. Miss those days.
That is amazing how you restored the pipe threading machine to working order. It looks much better than before and it works like a charm too. Excellent work I must say.
Recently discovered your channel and so glad I did. Your videos are excellent and satisfying at various levels. Besides showing a patient mastery of the restoration process, there is also a profound absence of the two things that ruin a majority of all UA-cam videos: irrelevant yack-yack-yack and horrible/inappropriate/loud music. You're videos get right to the point. Nicely photographed, good lighting and sound, brisk editing and efficient flow of action that never bores or confuses me. Well done!
Отличная работа!!! Вот такой резборезный ручной станок, которым можно регулировать под диаметр трубы, вижу в первый раз. Я пользовался много раз ручным подобным инструментом,на которых под каждый размер трубы меняется насадка. Но такой инструмент не ожидал увидеть!!! Браво 👍, хвалю за то что восстанавливает их хлама в полноценное состояние, такое не все понимают, поймут только те кто знают значимость таких инструментов!!!!! 🙋🏻♂️🙋🏻♂️🙋🏻♂️ Браво маэстро!!! 👍👍👍👍👍👍👍👍👍👍👍
Я рад, что вам понравилось! Большое спасибо 😊 Два размера труб 1" и 1¼ можно нарезать с помощью этих зубцов этого трубонарезного станка. Если вам нужно нарезать резьбу на трубе размером ½ и ¾, для этого есть отдельные зубцы
You need to focus more on casting marks and sharp edges! Other than that, excellent work! 🤩 You will be making more solid material with fewer holes and cracks and a more complete look after welding, if you learn the settings of your welding machine! and shorter protrusion on the filling material. no offence, just a sincerly opinion on how you can make your fantastic works better, and with less grinding and compromises!
Obviously it took a heck of a lot of laborious time and effort to disassemble and clean all that rust off the tool. And equally so to paint an reassemble it again. But it looks and seems to work very well. Nice refurbishing pipe thread cutter. It looks like the treads are not the typical NPT. They looked pretty fine threaded unless it was merely camera angle. Thumbs Up!
Great job Brought back memories 55 years ago to my apprenticeship 2” steam pipe for a coolant system on a bank of grinding machines Thank goodness plastics are now the norm Enjoyed the video 👍
Jamás se deben engrasar las piezas móviles ajustables de una terraja... por que acumulan restos minúsculos del material que se corta, y pronto su movimiento suele agriparse, trabando su libre recorrido dentro de su caja.
Wasted opportunity! You could use it, to make the thread for the hand crank, for the threading tool 8D But seriously, I really liked how rusty it was 8) Like "rusty-rusty", not "I-made-it-look-like-it's-rusty" rusty 8) Great job!
Gracias por sus amables palabras sobre mi trabajo de restauración. Me alegra que estos artículos guarden recuerdos tan especiales para usted y su padre. He utilizado una solución pavonada en frío para ennegrecer las piezas de la máquina roscadora de tubos. Si tiene artículos específicos en mente, estaré encantado de brindarle información más detallada.
My dad used to have one decades ago and taught me how to use it to thread galvanized pipe. It was rough and tough work to thread a pipe, but it taught me valuable skills. Miss those days.
As a 70 year old making UA-cam videos fixing junk same as I did as a kid. Channels like this have been a huge help!
Awesome job, that tool has another life.
It changed from Rusty to a working machine. You did a good job.
That is amazing how you restored the pipe threading machine to working order. It looks much better than before and it works like a charm too. Excellent work I must say.
I'm glad you liked it ☺️
Thank you so much
Really enjoyed this restoration . Someone else's neglect gave you an expensive tool once you recovered it to pristine workmanship . Kudo's
I'm glad you liked it ☺️
You said right
I appreciate the restorative efforts, but a manual pipe threader is anything but expensive, regardless of vintage.
Recently discovered your channel and so glad I did. Your videos are excellent and satisfying at various levels. Besides showing a patient mastery of the restoration process, there is also a profound absence of the two things that ruin a majority of all UA-cam videos: irrelevant yack-yack-yack and horrible/inappropriate/loud music.
You're videos get right to the point. Nicely photographed, good lighting and sound, brisk editing and efficient flow of action that never bores or confuses me. Well done!
enjoy the detail you go to make it not just work but look good 😊
Отличная работа!!!
Вот такой резборезный ручной станок, которым можно регулировать под диаметр трубы, вижу в первый раз. Я пользовался много раз ручным подобным инструментом,на которых под каждый размер трубы меняется насадка. Но такой инструмент не ожидал увидеть!!!
Браво 👍, хвалю за то что восстанавливает их хлама в полноценное состояние, такое не все понимают, поймут только те кто знают значимость таких инструментов!!!!!
🙋🏻♂️🙋🏻♂️🙋🏻♂️
Браво маэстро!!! 👍👍👍👍👍👍👍👍👍👍👍
Я рад, что вам понравилось! Большое спасибо 😊
Два размера труб 1" и 1¼ можно нарезать с помощью этих зубцов этого трубонарезного станка. Если вам нужно нарезать резьбу на трубе размером ½ и ¾, для этого есть отдельные зубцы
You need to focus more on casting marks and sharp edges! Other than that, excellent work! 🤩
You will be making more solid material with fewer holes and cracks and a more complete look after welding, if you learn the settings of your welding machine! and shorter protrusion on the filling material. no offence, just a sincerly opinion on how you can make your fantastic works better, and with less grinding and compromises!
Thank you very much for your feedback, I will try to improve my work.😊
شكرا لك انت انسان راقي ومثقف بحيث انك تنتبه لأدق التفاصيل. منها تضع فلتر حماية للعين عند اللحام فشكرا لك
Glad to find a restore channel that does things the old way and does not go right to a sand plaster and powder coating.
Alhamdulillah Ayaz brother I like your work very much.
Play it in reverse and he makes an antique
Very relaxing to watch and I really enjoy your craftmanship and skill. All the best.
I'm glad you liked it.
Thank you so much 😊
Me gustan las restauraciones pero hay que tener las herramientas necesarias para dejarlas como nuevas....
Great job 👌 but maybe you should take a welding class 😉🤗
Отличная работа!!
Are you soaking the parts in oil after cold bluing them? Thanks
I’m really impressed with the quality of your restoration work. The details you put into it are truly meticulous and exquisite.
I'm glad you liked it!
Thank you so much 😊
A guy that uses the right tool for the wrong thing
What do you mean?
@@MarshWahaI should have said it differently. He used a screw driver to remove a snap ring, when later you see him using a snap ring pliers
Obviously it took a heck of a lot of laborious time and effort to disassemble and clean all that rust off the tool. And equally so to paint an reassemble it again. But it looks and seems to work very well. Nice refurbishing pipe thread cutter. It looks like the treads are not the typical NPT. They looked pretty fine threaded unless it was merely camera angle. Thumbs Up!
I'm glad you liked it!
Thank you so much 😊
well done thanks for sharing
No sand blasting? Thanks for dimming the screen during the welding 😉👍
I'm glad you liked it ☺️
I don't have a sandblasting machine
Из куска коррозии...отличный инструмент 😎
☺️
good job....very nice
I'm glad you liked it.
Thank you so much 😊
I so enjoyed. Watch you work was great. Will watch again.
I'm glad you liked it ☺️
Thank you so much!
Good reaper skills nice job 👍👍
Been a while since seeing one one these, even longer using one. Well done.
Разве стопорные кольца не закалённые? Их можно греть без потери характеристик? А в целом проведена отличная работа. 👍
GREAT.WORK.BRAVO.
💯💯💯💯💯💯
Muito bom...! Não conhecia essa ferramenta, ótimo trabalho...!
muito obrigado 😊
Fico feliz que você tenha conhecido essa ferramenta através do meu vídeo
Very impressive. The rubber hand grip was a nice addition.
I'm glad you liked it 😊
Again, more outstanding restorative work! Awesome!
Thank you so much 😊
I remember these when I went onto my first building site many years ago. There wasa smaller version used to thread sleeves on conduit pipe.
Muy bueno saludos
أحسنت يامبدع انت رائع
Well done my friend, from, Bayamo, Cuba
Thank you so much dear friend 😊
Nice work.
Thank you so much 😊
Abridor, de Rosca, ficou novo denovo 👍
😊
Outstanding work ❤
Thank you so much dear friend
Great work!
Subscription well earned. Cheers! S
Thank you so much for your support ☺️
It’s like the level of restoration you chose for this was “meh, good enough”
Assalamu alaikum ayaz bai 🎉
Walikom Salam
Great job Brought back memories 55 years ago to my apprenticeship 2” steam pipe for a coolant system on a bank of grinding machines Thank goodness plastics are now the norm Enjoyed the video 👍
Thank you! I'm glad the video brought back such fond memories from your apprenticeship.😊
Great job
Jamás se deben engrasar las piezas móviles ajustables de una terraja... por que acumulan restos minúsculos del material que se corta, y pronto su movimiento suele agriparse, trabando su libre recorrido dentro de su caja.
Good job my friend !!
Thank you so much 😊
So would sandblasting not have worked a lot faster?
Well done, but add a little grease on spring
minute 15:56 Thank you very verry much. +1 if you thimk your eyes loves this channel.
great ❤❤❤❤
Thank you so much 😊
best job
Wasted opportunity! You could use it, to make the thread for the hand crank, for the threading tool 8D
But seriously, I really liked how rusty it was 8) Like "rusty-rusty", not "I-made-it-look-like-it's-rusty" rusty 8) Great job!
☺️
Good job
What do you use the rust for? 2:05
Ficou como novo 😮
Amazing work! You've got my sub 😀
Thank you so much for your support ☺️
Ассалому алейкум ишларизга омад
чоон рахмат😊
hola amigo yo tengo tres que son recuerdo de mi padre me encanta como lo restauras pero que liquido usas SALUDOS
Gracias por sus amables palabras sobre mi trabajo de restauración. Me alegra que estos artículos guarden recuerdos tan especiales para usted y su padre. He utilizado una solución pavonada en frío para ennegrecer las piezas de la máquina roscadora de tubos. Si tiene artículos específicos en mente, estaré encantado de brindarle información más detallada.
Parabéns 🎉seu de restauração é espetacular 🙏🎁❤️👍
muito obrigado 😊
عمل متقن ورائع
The threading tools themselves should have been left "silver", not blackened. Otherwise great job!
Thank you so much 😊
If the tool was not blackened, it would rust quickly
@@AyazRestoration We have the machine at home and we keep the tools just oiled/greased.
great restoration I did Subscribe you are amazing
Thank you so much for your support ☺️
Nice restoration! New subscriber!
I'm glad you liked it!
Thank you so much for your support ☺️
Nice job.
Thank you so much 😊
class !
Gran trabajo
Muchas gracias 😊
Amazing brother
Thank you so much 😊
Super jest odrestaurowane ta stara zabytkowa przedwojenna gwintownica do rur Pozdrawiam serdecznie. 👍👍👍👍👍
😊
Good luck trying to find a set of dies for that old boat anchor.
VERY ....VERY NICE WORK !!!👍👍👍👍
Thank you so much 😊
Have you not heard of Evaporust ?
Was it thrown in on top of the original owners coffin?
❤❤❤❤❤❤
Thank you so much 😊
Everytime i use cold bluing, the metal starts rusting the next day and even rusts while curring in oil.
S H O W !!! NOTA MIL...
👍👍👍
Thank you so much 😊
現代に蘇りましたね。
素晴らしい。
日本人より。😂
本当にありがとう😊
What is the name of the compound you coat the bare metal with?
What compound are you talking about? Mention the time
11:16@@AyazRestoration
Apply oil after cold bluing on the workpiece for good results.
@@AyazRestoration hello, what type of oil did you use after cold bluing?
The rust just goes away.
Better than new! 27:49
How many videos interruptions do you want?
Y E S !
what do you mean?
I think my favorite part is not flooding with the wd40. So much over use on some restores.
New dead island weapon unlocked
What country do you belong to, Ayaz sb.
Why is red a color coding for plumber tools?
Most pipe threading machines are red in color.
Why use WD-40 and not a penetrating oil ??
15:59 r.I.p bros camera
Incredible!
Thank you so much 😊
Eline sağlık
☺️
If very hot why grab it
Just subscribed btw
Right😅
thank you so much for your support ☺️
Больно смотреть, как издеваются над стамеской. Есть же более подходящие инструменты!!! 😢
He hammers the snapring off and uses snapring pliers to pick up the hot parts....
I Was ok because you keep all the original parts till you replace the pipe handle!😢
Love that you are using wire brushes for everything. This sandblasting era really doesn't sit with me.
I'm glad you liked it 😊
Teeth and turbines, 🦷 nice cleaning. Good episode
I'm glad you liked it!
Thank you so much 😊
Parabéns gostei muito
Аквабласт и нет проблем
☺️
I know this video is like 75% for those weird asmr people but sheesh. I'd have started with a pressure washer. Lol