I discovered that the topper will not rest on the front top of the bed without sliding the topper rails forward like you did. The directions clearly state to put those side rails where you initially placed them but the topper has nothing to rest on when folded if you do that. It just falls completely into the bed. 3rd gen Tacoma short bed here.
thanks for this, I have to modify the 2 front clamps for the weather guard box I have in the front and if I didn't see you adjust for the rear bar I would have drilled holes in the front in the wrong place, I owe you a beer!
Kelly Painter Does it leak at all? I'm looking to get one to replace the tonnaeu cover on my 2017 Tacoma. It'll be used for camping but also to haul music equipment when the band goes on tour. If it leaks pretty bad I would consider another option.
Informative, Thanks for sharing. Also thanks for sharing your revisions as you went along. I'm waiting on my Softopper to show up today for my Tundra. Your video was helpful.
Have one on my '15 Taco. Looks like ST made some design changes with the bar for the 3rd gen Tacos. Mine has held up well and I love the military/safari look it gives my rig.
Great video. Ordered one for my DCLB which should be arriving today. Regarding the bedrails, are they adhesive backing or just weather proofed foam and can be easily adjusted? You had to move it up an inch to line it up properly with the tailgate so was just wondering. Congrats on the inferno! Love the setup.
Quick question, have you or do you run it through a carwash (not touchless). I have been contemplating buying one, and thought of this. The manufacturer recommends only touchless...
How easy would it be to just take the bars and canvas off, leaving the bed rail parts on all the time? Live in an apartment complex and kind of just want one for camping/travel, not to leave on all the time. Thanks for the video.
Next Level Tactical, very minor leaks. It has to be crazy rain and even then it’s negligible. I forget but I think it was in the $6-800 range much cheaper and more useful than a hard top
Kris Long thank u. I’m looking long and hard on this. I think I like this too better with no windows besides the rear. Do you feel like you have weird blind spots ?
Not at all. That was a concern I had before I ordered it but it’s a non-factor. You see fine out the truck windows and rear window on the softtopper. The mirrors give the exact view that the soft topper would block.
Tinodixieroad, not really. If they want in they’re getting in. I would rather someone undo the snap and take my cooler instead of cutting into the side of the topper.
dustdeviltc88, I was extremely happy with it. I upgraded to an f150 to fit my growing family though. If anyone is in the Albuquerque area and interested in buying mine, I'm selling it for $500
Good video, I'm considering getting one for my '17 Taco before I do a really long road trip later in the year pulling my camper trailer... The vertical video bits make me want to stab my eyes out, tho. Stop vertical video... for the children!
thanks for this, I have to modify the 2 front clamps for the weather guard box I have in the front and if I didn't see you adjust for the rear bar I would have drilled holes in the front in the wrong place, I owe you a beer!
thanks for this, I have to modify the 2 front clamps for the weather guard box I have in the front and if I didn't see you adjust for the rear bar I would have drilled holes in the front in the wrong place, I owe you a beer!
I discovered that the topper will not rest on the front top of the bed without sliding the topper rails forward like you did. The directions clearly state to put those side rails where you initially placed them but the topper has nothing to rest on when folded if you do that. It just falls completely into the bed. 3rd gen Tacoma short bed here.
thanks for this, I have to modify the 2 front clamps for the weather guard box I have in the front and if I didn't see you adjust for the rear bar I would have drilled holes in the front in the wrong place, I owe you a beer!
Nice video. I just installed my SoftTopper on my 2017 Ridgeline. It went smooth and I love it. Had it on for almost a month now.
Kelly Painter Does it leak at all? I'm looking to get one to replace the tonnaeu cover on my 2017 Tacoma. It'll be used for camping but also to haul music equipment when the band goes on tour. If it leaks pretty bad I would consider another option.
Informative, Thanks for sharing. Also thanks for sharing your revisions as you went along. I'm waiting on my Softopper to show up today for my Tundra. Your video was helpful.
I have one of these on my 1st gen 4runner and it is well made, through winters and all, no problem.
Just ordered one for my truck! can't wait!
Have one on my '15 Taco. Looks like ST made some design changes with the bar for the 3rd gen Tacos. Mine has held up well and I love the military/safari look it gives my rig.
Dang that turned out great!❤🎉
This video was pretty helpful for the install. Thanks.
Nice job .
Looks great. I'm thinking of getting one for my taco too
Great video. Ordered one for my DCLB which should be arriving today. Regarding the bedrails, are they adhesive backing or just weather proofed foam and can be easily adjusted? You had to move it up an inch to line it up properly with the tailgate so was just wondering. Congrats on the inferno! Love the setup.
Roger Macanas, thanks man! It's just weather proofed foam, it was easy to adjust. Good luck with your setup, I hope this video helped some.
Quick question, have you or do you run it through a carwash (not touchless). I have been contemplating buying one, and thought of this. The manufacturer recommends only touchless...
nice to see
Great vid
Great video!
How easy would it be to just take the bars and canvas off, leaving the bed rail parts on all the time? Live in an apartment complex and kind of just want one for camping/travel, not to leave on all the time. Thanks for the video.
Bryce Webster it's pretty easy. Just remove the two pins in the middle and you can take all the bars and canvas off together at once.
Thinking of getting one of these. Does the rear window secure to the tailgate in any way, or does it just "flap" around?
Where did you get that net that you put in the back to keep your dog in?
Keegan Stevens, it's just a standard cargo net from my wife's old Honda Pilot.
我是在台灣，我的車是TOYOTA(HILUX)的皮卡車。如何 訂購後車斗這帆布架！
Great video bro I’m thinking about one for my 2016OR. Any leaks ? Price point ?
Next Level Tactical, very minor leaks. It has to be crazy rain and even then it’s negligible. I forget but I think it was in the $6-800 range much cheaper and more useful than a hard top
Kris Long thank u. I’m looking long and hard on this. I think I like this too better with no windows besides the rear. Do you feel like you have weird blind spots ?
Not at all. That was a concern I had before I ordered it but it’s a non-factor. You see fine out the truck windows and rear window on the softtopper. The mirrors give the exact view that the soft topper would block.
Kris Long big help. Thank u so much
What kind of knife did you use to cut the box open?
It’s a Benchmade Osborne.
Is there any way that I can modify something somehow so It isn’t that easy to break it into?
Tinodixieroad, not really. If they want in they’re getting in. I would rather someone undo the snap and take my cooler instead of cutting into the side of the topper.
Still happy with it Kris.?
dustdeviltc88, I was extremely happy with it. I upgraded to an f150 to fit my growing family though. If anyone is in the Albuquerque area and interested in buying mine, I'm selling it for $500
Kris Long still for sale?
Good video, I'm considering getting one for my '17 Taco before I do a really long road trip later in the year pulling my camper trailer...
The vertical video bits make me want to stab my eyes out, tho. Stop vertical video... for the children!
SofTopper only has one T.
He’s hot
i can buy a 2000 Chevy Tahoe for $1500.00 the soft topper cost $750.00 without tax. Do the math.
thanks for this, I have to modify the 2 front clamps for the weather guard box I have in the front and if I didn't see you adjust for the rear bar I would have drilled holes in the front in the wrong place, I owe you a beer!
thanks for this, I have to modify the 2 front clamps for the weather guard box I have in the front and if I didn't see you adjust for the rear bar I would have drilled holes in the front in the wrong place, I owe you a beer!